Display article   Subject:  EGA/CGA Settings under XENIX
   04/30/97   19:24:15


EGA/CGA CARD SETTINGS FOR USE WITH A VM-5

To have a VM-5 (25-3011) function properly in the XENIX System V
(25-4201) environment with the EGA/CGA card (25-3048), the settings
on the EGA/CGA card should be:

Switch 1 - OPEN
Switch 2 - OPEN
Switch 3 - CLOSED
Switch 4 - OPEN
Switch 5 - OPEN
Normal Enhanced Jumper - 2 and 3 jumpered


NOTE:  Be sure to insert this card in slot 10 (nearest the power
supply) on the Tandy 3000 and check that Switch 5 is OPEN.
Additionally, even though this is not an EGA monitor, EGA MUST be
specified as the monitor type during SETUP.
