ENHANCED VGA - ORCAD display driver
1. The driver supports the followings:
     Resolution        Mode       Minimun display       Driver Name
                      (Hex.)      memory required

   640 * 480 * 16      12 h           256 KB           TSENG6X4.DRV
   800 * 600 * 16      29 h           256 KB           TSENG8X6.DRV
2. We suggest you to install your ORCAD under the sub-directory named
   ORCAD  in  Drive  C: and  put  all  the  drivers into another sub-
   directory named DRIVER under ORCAD, for example:

   C:\ORCAD\DRIVER

3. Copy files TSENG8X6.DRV (800 * 600) and TSENG6X4.DRV (640 * 480)
   from  our attached ORCAD driver diskette to DRIVER  sub-directory
   as follows:

   C:CD\ORCAD    <ENTER>
   C:\ORCAD>COPY A:\DRIVER\ORCAD3\*.DRV C:\DRIVER     <ENTER>

4. Change working parameter of ORCAD. First please type: DRAFT/C as follws:

   C:\ORCAD>DRAFT/C    <ENTER>

   then make a proper selection among those choices shown on  screen
    for a correct display driver.

   COMMAND? DD (DD for Display Driver)
   SELECTION-> S  (S  for Special Driver)
   SELECTION-> TSENG8X6.DRV (or TSENG6X4.DRV)

   after complete above,  select Q (quit  back to MAIN MENU in order
   to continue next procedure.
5. If there  is no other parameter to be changed, please do remember
   to  select U (update) to substitute for old data in working para-
   meter before execution of ORCAD (R run ORCAD program) or back to
   DOS prompt (Q quit from ORCAD).