@X00
@X38┌────────────────────────────────────────────────────────────────────────────@X3B┐@X0B
@X38│ @X3EHelp: @X3F End of Message Menu                                                 @X3B│@X0B
@X38└@X3B────────────────────────────────────────────────────────────────────────────┘@X0E

@X0F
   Description - GRAPH/ANSI modes (M GRAPH, M ANSI):
@X03
      After you read each message, the system will display the @X0AEnd of
      Message@X03 menu. This menu is made up of seven different categories
      of commands. A help line, displayed below the commands, shows
      help for each command as it is hilited.

      The seven menu categories are:

         1. Common      - the most commonly used End of Message commands
         2. Actions     - commands to change the scope of reading, based on
                          the current message
         3. Memorize    - memorized messages
         4. Change      - change the display, edit messages
         5. Reselect    - change the read 'filter' for subsequent messages
         6. Conference  - moving through conferences
         7. SysOp       - maintenance of messages and users

@X0F
   Description - CTTY mode (M CTTY):
@X03
      After you read each message, the system will display the @X0AEnd of
      Message@X03 prompt. Since menu navigation is not possible with the
      CTTY display mode (ANSI commands are disabled), you may choose only
      from the commands displayed. The Advanced command, however, will
      allow you to manually type in any valid End of Message command.

@X0F
   Navigation - GRAPH / ANSI display modes (M GRAPH, M ANSI):
@X03
         Key            Action
         -------------- -----------------------------------------------
         Cursor Right   move hilite / cursor to the right
         Space          move hilite / cursor to the right
         Cursor Left    move hilite / cursor to the left
         BackSpace      move hilite / cursor to the left
         Home           move hilite / cursor to left-most option
         End            move hilite / cursor to right-most option

         >              move hilite / cursor to 'next menu' option
         .              move hilite / cursor to 'next menu' option
         <              move hilite / cursor to 'previous menu' option
         ,              move hilite / cursor to 'previous menu' option

         1              hot-key directly to menu #1 (Common)
         2              hot-key directly to menu #2 (Actions)
         3              hot-key directly to menu #3 (Memorize)
         4              hot-key directly to menu #4 (Change)
         5              hot-key directly to menu #5 (Reselect)
         6              hot-key directly to menu #6 (Conference)
         7              hot-key directly to menu #7 (SysOp)
        -------------- -----------------------------------------------

         With the exception of the numeric menu hot-keys, which execute a
         command immediately, you must press the ENTER key to execute the
         hilited command.

         When in GRAPH mode, the current option will be hilited.

         When in ANSI mode, the current option will have the cursor flashing
         under the 'trigger' (capitalized) letter of the option.

@X0F
   Navigation - CTTY display mode (M CTTY):
@X03
         Key            Action
         -------------- -----------------------------------------------
         (inactive)     (not applicable in CTTY mode)

@X0F
   Options - Menu #1, Common:
@X03
         C     - Continue, read next message in current direction. If read
                 direction is set to forward (+), the next numerically
                 higher message will be displayed. If read direction is set
                 to backward (-), the next numerically lower message will
                 be displayed. This is the default option, with read
                 direction set to forward.

         N     - Next, read the next message, forward read direction is
                 forced and set for subsequent mail.

         P     - Previous, read the previous message, backward read
                 direction is forced and set for subsequent mail.

         R     - Reply, reply to the current message, to the sender.

         K     - Kill, delete the current message (if from or to you).

         D     - reDisplay, show the current message again, starting with the
                 first line.

         S     - nonStop, display all of the remaining mail on the screen
                 without further pauses.

         +     - change read direction to forward. Used by the Continue
                 option to read mail in numerically higher order.

         -     - change read direction to backward. Used by the Continue
                 option to read mail in numerically lower order.

         A     - Advanced, exits menu and allows you to type in any valid
                 PCBoard End of Message command(s). Help is available for
                 the Advanced command by typing '?' after choosing this
                 option.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (Action).

@X0F
   Options - Menu #2, Action:
@X03
         <     - Display previous menu (Common).

         F     - Flag, mark a file attached to the current message for
                 downloading.

         V     - View, inspect the contents of a file attached to the
                 current message.

         +     - Thread +, read any other messages with the same subject
                 as the current message, forward direction.

         -     - Thread -, read any other messages with the same subject
                 as the current message, backward direction.

         R     - Reference, read the message referenced by the current
                 message.

         C     - Capture, capture the current message and download it
                 immediately.

         Z     - Zip, capture and compress (ZIPP) the current message and
                 download it immediately.

         L     - Last, read from the last message in the conference,
                 backward direction.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (Memorize).

@X0F
   Options - Menu #3, Memorize:
@X03
         <     - Display previous menu (Action).

         M     - Memorize, mark the current message for later reading.
                 Think of it as placing a bookmark at the message.

         D     - memorizeD, read a memorized message.

         +     - memorized+, read a memorized message and continue reading,
                 forward direction.

         -     - memorized-, read a memorized message and continue reading,
                 backward direction.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (Change).
@X0F
   Options - Menu #4, Change:
@X03
         <     - Display previous menu (Memorize).

         L     - Long, change the display of messages to show the extended
                 message header information.

         S     - Short, change the display of messages to show the
                 abbreviated message header information.

         E     - Edit, change the body of the current message (if from you).

         D     - heaDer, change the header of the current message (if from
                 you).

         A     - Alias, toggle your alias name on / off. Used to identify
                 the sender of replies (you or your alias).

         R     - Reply user, reply to the current message, but address the
                 reply to a different user than the sender.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (Reselect).
@X0F
   Options - Menu #5, Reselect:
@X03
         <     - Display previous menu (Change).

         N     - New, read new mail (unread by you).

         Y     - Yours, read mail addressed to you.

         A     - All, read mail addressed to you or 'All' users.

         F     - From, read mail from a specific user.

         T     - To, read mail to a specific user.

         U     - User, read mail to or from a specific user.

         S     - Search, search mail for specific text. Boolean operators
                 '&' (and), '|' (or), '!' (not) are allowed.

         #     - message number, type in a specific message number to read.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (Conference).
@X0F
   Options - Menu #6, Conference:
@X03
         <     - Display previous menu (Reselect).

         T     - seT, set the last message number read in the current
                 conference.

         S     - Select, add the current conference to the list of
                 conferences that you normally scan for new mail.

         D     - Deselect, remove the current conference from the list of
                 conferences that you normally scan for new mail.

         J     - Jump, join the next select conference, based on your
                 selected conference list. Only valid if you are currently
                 reading selected or all conferences.

         K     - sKip, skip the current conference and move to the next
                 conference in your selected conference list. Also sets the
                 last message read to the last message in the current
                 conference.

         G     - Goodbye, log off of the system.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).

         >     - Display next menu (SysOp).
@X0F
   Options - Menu #7, SysOp (all commands limited to SysOp only):
@X03
         <     - Display previous menu (Conference).

         C     - Copy, copy the current message to another conference.

         M     - Move, move the current message to another conference.

         V     - priVate, make the current message private.

         P     - Public, make the current message public.

         F     - From, access the current message sender's user record.

         T     - Tr, access the current message recipient's user record.

         Q     - Quit, stop reading mail.

         H     - Help, display help screen (you are here now).


         Choose the desired option, either via moving the hilite/cursor
         or pressing the appropriate key, and press ENTER.

@X0F
   Tips
@X03
         For the cleanest display of mail, set the system to clear the
         screen after each message, and to stop at the end of the screen
         for long messages. These can be accomplished using the '(W)rite
         User Information' command.

         When using the (A)dvanced or (#) command, the ESC key can be used
         to clear all typed characters. This assumes that your communications
         program supports the sending of the ESC key.

         Once you have become accustomed to the placement of the commands
         on each menu, you can use the menu hot-keys (1 - 7) to display a
         desired menu, without scrolling through all of the menus
         in-between.

         Use the (A)dvanced command on the Common menu to enter combined
         commands, like Yours, ALL conferences:

               Y;ALL

         Keep in mind that the trigger keys shown for the commands on the
         End of Message menu are not necessarily the same as the native
         PCBoard commands. For example, the (F)rom option available on the
         Reselect menu maps to PCBoard's native (FROM) command.


   < end of @X0AEnd of Message Menu@X03 help >

@WAIT@@XFF
