Please read the files LICENSE.DOC and PRODAID.TXT included in this package prior
to using these programs!

To create a diskette from the DSK file:

- Insert a blank diskette into the A: drive

- At a DOS prompt type "LOADDSKF <filename>.DSK A:" and press Enter
  (note that <filename> should be the name of the file that contains the
   original disk image.)

- Follow the instructions on the screen

Example:  If the disk image file you received is "R700C111.DSK" then you would
          type the following at a DOS prompt:

               LOADDSKF R700C111.DSK A:

          and then press Enter.

If you receive a message stating that an incorrect disk format was detected, it
means that the original disk image was on a different density disk than the one
you inserted in the A:  drive.  For example, if you inserted a high density
(1.44M) disk in the A:  drive and the disk image was created from a 720K disk
you would get the following error message:


     Target disk is wrong format

     Expecting 2 side(s) - 80 tracks -  9 sectors per track


To correct the problem simply replace the disk in drive A:  with the correct
density disk and re-enter the LOADDSK command at the DOS prompt.