Setup Help Contents
Contents for Setup Help

The following dialog boxes are documented in Setup Help:

Change Directory

Change Directory with Use Source Button

Custom Installation

Install Application

Main Application Installation

Maintenance Installation

Network Server Confirmation

Not Enough Disk Space

Replace Application

Restart Windows

Shared Application Files

Suboptions Available

Suboptions Maintenance

Welcome


Welcome window
Welcome

During the installation process that follows, Setup will not be able to install system files or update shared files if they are in use. Before proceeding, we recommend that you close any applications you may be running.

To close applications without exiting Setup

1.	Check for open applications by pressing CTRL+ESC to display the Windows Task List.

2.	From the Task List, select each application you want to close.

3.	Choose the End Task button.

Note  Program Manager and Setup must remain open.

To close an MS-DOS session

1.	In the Task List, select MS-DOS Prompt.

2.	Choose the Switch To button.

3.	Type exit at the prompt.

4.	Press ENTER.


Change Directory window
Change Directory

To change the destination directory for installing the application

In the Path box, type the complete path of the destination directory and choose the OK button.

Or

In the Directories box, select the directory where you want Setup to install the application and choose the OK button. Setup opens the directory and displays it in the Path box. Choose the OK button to accept the current path.

If the directory is on a different drive, select the drive in the Drives box. (Click in the box or click the arrow to the right of the box to display a list of available drives.) The directories on that drive appear in the Directories box.

If the directory does not exist, select the drive and directory(ies) you want in the path, then add the new subdirectory name in the Path box by typing it at the end of the path.


Install Application window
Install Application

To install the application into the directory displayed in the Directory box

Choose the OK button.

To install the application in a different directory

Choose the Change Directory button.


Replace Application window
Replace Application

Setup found an existing or older version of the application in the directory displayed in the Directory box.

You can replace the existing version of the application or you can keep the existing version of the application by installing the new version in a different directory.

To replace the application in the directory displayed in the Directory box

Choose the OK button.

To install the new version of the application in a different directory

Choose the Change Directory button.


Main Application Installation window
Main Application Installation

Setup displays the choices you have for installation. Choose the button next to the type of installation you want.

If an installation type is unavailable, then you do not have enough space on your hard disk for the installation type. You should do one of the following:

Choose another installation type.

Or

Choose another destination drive by choosing the Change Directory button.

Or

Switch out of Setup to another application (such as File Manager) to delete files from your hard disk and make more disk space available. You can switch out of Setup by pressing CTRL+ESC to display the Windows Task List.

Or

Exit Setup by choosing the Exit Setup button.


Custom Installation window
Custom Installation

This installation type allows you to choose options for installation.

To select the options for installation

In the Options box, select the check box for the item you want to install or clear the check box for any item you do not want to install. To select or clear an item's check box, click the item's check box or press the spacebar while the item is selected.

A description of the selected item appears in the Description box.

To see further options

In the Options box, select an item and then choose the Change Option button.

Note  The Change Option button is unavailable if there are no subitems to select.

To install an item in a different directory

In the Options box, select an item and then choose the Change Directory button. The Change Directory button is only available for an item that may be installed in another directory.

The Space Required line at the bottom of the screen shows the disk space required for the selected items. These items will be installed on the drive shown.


Suboptions Available window
Suboptions Available

You can install or choose not to install the suboptions (components) of an application.

To select the options for installation

In the Options box, select the check box for the item you want to install or clear the check box for any item you do not want to install. To select or clear an item's check box, click the item's check box or press the spacebar while the item is selected.

A description of the selected item appears in the Description box.

The Space Required line at the bottom of the screen shows you the disk space required for the selected items. These items will be installed on the drive shown.

Note  This is not the space required for the total files that are installed on this drive; this is the space required only for the sum of the selected items in the Options box on this screen.


Shared Application Files window
Shared Application Files

Setup displays the directory where it will install the shared files that are used by more than one application. Examples of shared files include proofing tools and file converters. If this directory name is correct, choose the OK button.

To change the path to a new directory

Choose the Change Directory button.


Network Server Confirmation window
Network Server Confirmation

Setup displays the Network Server and Network Path where the network users will connect to the shared application files. The server and path should be the same server and path that the network users will supply to run from the server. If this is the correct server and path, choose the Continue button. If network users will connect to the shared files from a different server and path, type the new server and path and then choose the Continue button.


Network Server Confirmation

Setup could not find the specified Network Server and Network Path where the network users will connect to the shared application files. The server and path should be the same server and path that the network users will supply to run from the server. Type the valid server and path, then choose the Continue button.


Maintenance Installation window
Maintenance Installation

You can choose options for installation or remove items that have already been installed.

To select the options for installation

In the Options box, select the check box for the item you want to install or clear the check box for any item you want to remove. To select or clear an item's check box, click the item's check box or press the spacebar while the item is selected.

A description of the selected item appears in the Description box.

Note  If an item in the Options box is unavailable for selection, the item was previously installed by another application; you cannot reinstall or remove the item.

To see further options

In the Options box, select an item and then choose the Change Option button.

Note  The Change Option button is unavailable if there are no further items for the selected option.

To install an item in a different directory

In the Options box, select an item and then choose the Change Directory button. The Change Directory button is only available for an item that may be installed in another directory.

The Space Required line at the bottom of the screen shows you the disk space required for the selected items. These items will be installed on the drive shown.

The complete count of components that you are adding or removing is shown near the bottom of the screen.


Suboptions Maintenance window
Suboptions Maintenance

You can install or remove suboptions or components of an application.

To select the options

In the Options box, select the check box for the item you want to install or clear the check box for any item you want to remove. To select or clear an item's check box, click the item's check box or press the spacebar while the item is selected.

A description of the selected item appears in the Description box.

The Space Required line at the bottom of the screen shows the disk space required for the selected items.

The complete count of components that you are adding or removing is shown near the bottom of the screen.


Not Enough Disk Space window
Not Enough Disk Space

There is not enough disk space for Setup to install the options you selected.

The disk space area shows the amount of disk space required to install the selected options, the amount of disk space available, and the difference between the two amounts (Space Needed).

Space Needed is the amount of disk space you must make available before Setup can install the selected options. You can do one of the following:

Change the install options by choosing the Change Options button.

Or

Attempt to install the selected options by choosing the Install Now button.

Or

Switch out of Setup to another application (such as File Manager) to delete files from your hard disk and make more disk space available. You can switch out of Setup by pressing CTRL+ESC to display the Windows Task List.

Or

Exit Setup by choosing the Exit Setup button.


Change Directory with Use Source Button

To change the destination directory for installing the application

In the Path box, type the complete path of the destination directory and choose the OK button.

Or

In the Directories box, select the directory where you want Setup to install the application and choose the OK button. Setup opens the directory and displays it in the Path box. Choose the OK button to accept the current path.

If the directory is on a different drive, select the drive in the Drives box. (Click in the box or click the arrow to the right of the box to display a list of available drives.) The directories on that drive appear in the Directories list.

If the directory does not exist, select the drive and directory(ies) you want in the path, then add the new subdirectory name in the Path box by typing it at the end of the path.

To use the files from the network

Select the Use Source button. These files will not be copied to your local hard drive.


Restart Windows window
Restart Windows

At this point, Setup restarts Windows to complete the installation. We recommend that you save your current work in any open applications and then close all applications, including MS-DOS sessions. Then choose the Continue button.

To close applications without exiting Setup

1.	Check for open applications by pressing CTRL+ESC to display the Windows Task List.

2.	From the Task List, select each application you want to close.

3.	Choose the End Task button.

Note  Program Manager and Setup must remain open.

To close an MS-DOS session

1.	In the Task List, select MS-DOS Prompt.

2.	Choose the Switch To button.

3.	Type exit at the prompt.

4.	Press ENTER.

Choosing the Continue button restarts Windows. If you have open applications you may lose any information you have not saved.