BEFORE YOU BEGIN

Read all the instructions before proceeding.  This update requires your computer to restart several times before completing.  To print a copy of these instructions, click the Print button.

To complete this update all IDE controllers must be removed.  The following steps guide you through the process.

1	Click here [image] to display Device manager.

2	Click the plus sign next to Hard disk controllers, and  then select the first device in the Hard disk controllers tree.

3	Click Remove.

4	Confirm the device removal by clicking OK.

5	If the System Setting Change dialog box prompts you to restart your computer, click No.

6	Repeat Steps 2 through 5 until you remove all IDE controllers.

7	Click the Close button.

8	Remove all diskettes.

IMPORTANT

The next step restarts your computer and closes these instructions.  When you restart your computer you will be prompted to select a driver for the new hardware, select “Windows default driver” and then click OK.  Be sure to click Yes at each computer restart prompt.

9	Click the Start button, click Shut Down, and then click Restart the computer.

10	When the update is complete the Hard disk controllers tree contains these devices:

Intel 82371SB PCI IDE Controller

Primary (dual fifo)

Secondary (dual fifo)