MEDIA CONCEPT 2.0 INFORMATION ------------------------------------ 1. INSTALLATION To install just execute the installation program, MCSETUP.BAT, found on the diskette labeled "Media Concept 2.0 Disk 1". MCSETUP.BAT will install all Media Concept 2.0 files into your PC hard disk. To begin installation, follow these steps. 1. Place the distribution disk labeled "Media Concept 2.0 Disk 1" in floppy drive and change drive. 2. Type MCSETUP and press . MCSETUP.BAT may add the MC environment settings into your AUTOEXEC.BAT file, and creates MC.CFG file containing the configuration information. 2. PACKAGE CONTENTS The Media Concept 2.0 software package contains : - Two 5.25" 1.2M disks - Media Concept 2.0 Disk 1 - Media Concept 2.0 Disk 2 The following files are contained in 1.2M diskette. Media Concept 2.0 Disk 1 - MCSETUP.BAT - Media Concept 2.0 software installation program MCINST.EXE - Hard disk installation program MCTEST.EXE - Media Concept 2.0 card test program MCVOIS.EXE - Voice integrated program MCPLAY.EXE - Voice play program MCREC.EXE - Voice record program MCSSR.EXE - Change sampling rate program MCTEST.VOC - Voice sample file README - This file LHARC.EXE - Decompression program for MCDEMO.LZH MCDEMO.BAT - Media Concept 2.0 demo program MCDEMO.VOC - Media Concept 2.0 demo voice file MCDEMO.ACT - Media Concept 2.0 demo act file AAPLAY.EXE - Media Concept 2.0 demo play file Media Concept 2.0 Disk 2 - MCSETUP.BAT - Media Concept 2.0 software installation program MCDEMO.LZH - Media Concept 2.0 demo compression file 3. MC ENVIRONMENT Several parameters defined in MC.CFG file are described as follows. A220 I7 D1 T3 Note: * A refers to I/O address setting * I refers to IRQ setting * D refers to DMA channel setting * T refers to Media Concept 2.0 card type