; 
; $Revision:   1.8  $
; $Date:   12 Sep 1988 14:58:36  $
;
; **************************************************************************
; * Copyright (C) 1988 by Phoenix Technologies Ltd.  This program           
; * contains proprietary and confidential information.  All rights reserved 
; * except as may be permitted by prior written consent.                    
; **************************************************************************

; WARNINGS.MSG

; These messages are used for warnings on the PRD screens. The format is:
; $ XX "yyy" 
; Where XX represents the message number and yyy is the help text. The $ must
; always precede the number and be followed by a space. In addition the
; text is always delimited by quotes so embedded quotes are not permitted.


$ 35 " The Adapter Description File (%s) could not be found for slot %d."
$ 41 " Insufficient memory to process file."

$ 56 "Drive type record does not contain 'IBM HARDFILE TYPE'.  Drive %d may 
require low level format."
$ 57 "Value for drive type (%d) in the Drive Type Record does not equal value in
CMOS (%d). Updating CMOS with value in the Drive Type Record for drive %d."
$ 58 "Drive type record cannot be read.  Drive %d may require low level format."
$ 59 "CMOS indicated there was a drive %d where none was found. Updating CMOS
with zero to indicate no drive is attached."
$ 60 "There is no configuration information for the card in slot %d."

$ 1  "File %s Line %d : Only 2 MEM numbers are permitted." 
$ 2  "File %s Line %d : MEM data must be a number."
$ 3  "File %s Line %d : MEM data has no associated Choice or FixedResources."
$ 4  "File %s Line %d : Only 16 ARB numbers are permitted."
$ 5  "File %s Line %d : ARB data must be a number."
$ 6  "File %s Line %d : ARB data has no associated Choice or FixedResources."
$ 7  "File %s Line %d : Only 16 INT numbers are permitted."
$ 8  "File %s Line %d : INT data must be a number."
$ 9  "File %s Line %d : INT data has no associated Choice or FixedResources."
$ 10 "File %s Line %d : AdapterName text too long or missing a closing quote."
$ 11 "File %s Line %d : NumBytes must be followed by a number."
$ 12 "File %s Line %d : Each Nameditem must have a Prompt."
$ 13 "File %s Line %d : Each Nameditem must have a Choice."
$ 14 "File %s Line %d : Each Nameditem must have a Help."
$ 15 "File %s Line %d : Prompt text too long or missing a closing quote."
$ 16 " File %s Line %d : Nameditem must occur before Prompt."
$ 17 " File %s Line %d : Help text too long or missing a closing quote."
$ 18 " File %s Line %d : NamedItem must occur before Help."
$ 19 " File %s Line %d : Invalid Choice text."
$ 20 " File %s Line %d : NamedItem must occur before Choice."
$ 21 " File %s Line %d : No POS byte for last Choice."
$ 22 " File %s Line %d : POS[N] occurs where N is not in the range 0 to 5."
$ 23 " File %s Line %d : POS data not in format pos[n]=00000000b"
$ 24 " File %s Line %d : POS data has no associated Choice or FixedResources."
$ 25 " File %s Line %d : Only 16 IO ranges are permitted."
$ 26 " File %s Line %d : IO data must be a range of numbers."
$ 27 " File %s Line %d : IO data has no associated Choice or FixedResources."
$ 28 "There is no conflict free configuration for the current hardware."
$ 29 " File %s Line %d : The keyword 'FixedResources' occurs more than once."
$ 30 " File %s Line %d : No POS bytes with last FixedResource."
$ 36 "More than %d Choices for Automatic Configuration. Use manual configuration."
$ 37 "Insufficient memory for Automatic Configuration. Use manual configuration."
$ 38 "No legal AdapterId found in the file %s."
$ 39 "No legal AdapterName found in the file %s."
$ 40 "No legal NumBytes found in the file %s."
$ 42 "AdapterId does not match the file name in %s"
$ 43 "AdapterId is not a legal number in the file %s."
$ 44 "The keyword AdapterId occurs more than once in the file %s"
$ 52 " Restore file is not for this model machine. Restore failed."
$ 55 " Insufficient memory to copy disk. Backup failed."
$ 61 " File %s Line %d : CMOS or ECMOS has no associated Choice."
$ 62 " File %s Line %d : CMOS or ECMOS value is not a valid number."
$ 63 " File %s Line %d : CHIPREG has no associated NamedItem."
$ 64 " File %s Line %d : CHIPREG value is not a valid number."
$ 65 " Insufficient memory to View or Change all NamedItems in this Slot. (%d)"