
                     W89C940 Demo Program Help Message
A.Configure W89C940
  (a) Set Configuration
      --> mode configuration
          (When LAN card numbers are more than one,users will be
           asked which card will be shown. Users just input the
           card number that is need.)

  (b) Show Configuration
      --> (1) mode configuration
              (When LAN card numbers are more than one,users will be
               asked which card will be shown. Users just input the
               card number that is need.)

          (2) PCI configuration
              (When LAN card numbers are more than one,users will be
               asked which card will be shown. Users just input the
               card number that is need.)

  (c) Set Demo Board Number
      (The item is just shown when LAN card numbers are more than one )
      --> When users choose one of both/all demo boards, the following
          items are demonstrated in the board that users select.
          For instance, 3 LAN cards exist. Users choose the second card.
          All the following items will be demonstrated in the second card.
          When users want to change to the third board, users also select
          the third board by this item.

B.Diagnose
                       Reset Test
                       Register Test
                       Remote DMA Test
                       Loopback All Test
                       Loopback 1 Test
                       Loopback 2 Test
                       Loopback 3 Test

C.Transmit/Receice :
   (a) Transmit packets

   (b) Receive packets

   (c) Transmit/Receive packets

D.Access Physical Address :
  To show users the LAN card physical address

E.Reset W89C940 :
  By this item, the chip will be reseted by 31f port.

** Before leaving this program, users will be asked whether to choose
   Frame Type in NET.CFG. If the card numbers are more than one, all
   information will be generated in NET.CFG file.
