NDC Instant-Link Ethernet PCI Adapter
NDIS Driver for IBM LAN Server Installation
==============================================================

This file contains the installation method for the following
environments:

     - IBM LAN Server DOS Requester.
     - IBM LAN Server 4.0 Server.
     - IBM LAN Server 2.0/3.0 Server.

Before you start the installation  process,  make sure that
the LAN Server and your adapter are properly installed.

For PROTOCOL.INI parameters, refer to SETTING.TXT file. (in the root
directory of ND5200 Setup Disk.)



* ------------------------------------------------------------ *
* A. NDIS Driver for IBM LAN Server DOS Requester Installation *
* ------------------------------------------------------------ *

Location of Driver:  \NDIS2


INSTALLATION PROCEDURE

1)   At the DOS prompt, insert the IBM LAN Support Program (LSP)
     Version 1.30 (or later) diskette.

2)   Type: DXMAID

3)   Press the <Enter> key three times.

          The Environment Information screen appears.

4)   Specify the following values for the fields on this screen:

          Configuration for this computer?                Yes
          Use existing configuration information?         No
          Do you have adapter option diskettes?           Yes
          Are you configuring for two adapters?           No

          Source for LSP                                  A:\
          Target for new configuration                    C:\lsp

5)   Press <Enter> to store your choices.

          The program prompts you to install the option diskette.

6)   Insert the Setup diskette in your source drive and specify
     the path: A:\NDIS2.

7)   Press <Enter>.

          The necessary files are copied from the Setup diskette
          to your target directory on your computer's hard disk.

8)   Press <Enter> three times.

9)   Insert the LSP diskette and press <Enter>.

          The Current Configuration screen appears with the ND5200
          Ethernet adapter and protocols already selected ("IBM
          IEEE 802.2" and "IBM OS/2 NETBIOS").


10)  Press <F4>. LSP is installed.

11)  Use any text editor to edit the CONFIG.SYS file. Specify at
     least 20 files in the FILES= line; for example:

          files=20

     Once you save your CONFIG.SYS, reset your computer.

12)  Insert the DOS LAN Requester Install Diskette.

13)  Type: INSTALL

14)  Press <Enter> three times.

          The program prompts you for the pathname of the DOS LAN
          Requester directory.

15)  Specify the pathname for the DOS LAN Requester directory
     (C:\DOSLAN is the default). Press <Enter>.

          The program asks which services you require.

16)  Highlight either the "Send messages" or "Send, View, Edit, and
     Log messages" option. (Normally, you select the second
     option.)

17)  Press <Enter> to confirm your choice.

18)  Specify the workstation's ID and the domain ID. The domain ID
     must be the domain server ID and must be the same for all
     workstations on the network.

19)  Follow the screen prompts to complete the installation.



* ------------------------------------------------------------ *
* B. NDIS Driver for IBM LAN SERVER 4.0 Server Installation    *
* ------------------------------------------------------------ *

Location of Driver:  \NDIS2\IBMLAN\ND5200.OS2


INSTALLATION PROCEDURE

1) In the OS/2 window, Click the "MPTS" icon.

2) The screen will display the IBM Logo, press "OK".

3) Select "Install" button.

4) Insert the ND5200 PCI Ethernet Adapter driver diskette, specify the
   driver path A:\NDIS2\IBMLAN and press <Enter>.

5) Select "Install" again and then select the "Configure" button.

6) The screen will display the "Configure" dialog box. Select "LAN
   adapters and protocols" then press the "configure" button.

7) The screen will display the "LAPS Configuration" dialog box,
   highlight "ND5200 PCI Ethernet Adapter" in the "Network Adapter"
   window, and select the "NetBios" protocol. Press "OK".

8) Installation is now complete. Reset your PC by turning it off
    and on.



* ------------------------------------------------------------- *
* C. NDIS Driver for IBM LAN Server 2.0/3.0 Server Installation *
* ------------------------------------------------------------- *

Location of Driver:  \NDIS2\IBMLAN\ND5200.OS2  (for OS/2 LAN Server)


INSTALLATION PROCEDURE

1) Copy the ND5200.OS2 and ND5200.NIF files from your Driver diskette
   (\NDIS2\IBMLAN) to C:\IBMCOM\MACS.

2) Click the OS/2 LAN Service icon.

3) Select "Installation  and  configuration".  The IBM logo should
   appear onscreen.

4) Click <OK>.

5) Select <Advance> and press <Enter>.

6) Select "Install or Configure this Workstation."

7) Select server type, adding a server or domain controller.  The
   "install or remove" selections should appear.

8) Select "Configure a component."

9) Click the "Configure" button.

10) Select "Configure workstation."

11) Select "ND5200 PCI Ethernet Adapter" when prompted to identify your
    Network Adapter. Then click the <Add> button.

12) Select IBM NETBIOS from the list and click the <Add> button.

13) Select <OK> to confirm all selections.

14) Follow the screen instructions to complete the process, selecting
    <OK> to accept the default selections.

15) Continue pressing <OK> until your screen prompts you to backup
    old  CONFIG.SYS and  AUTOEXEC.BAT and create a new  CONFIG.SYS
    and AUTOEXEC.BAT. Select <OK> to confirm this.

16) Installation is now complete. Reset your PC by turning it off
    and on.


------------------------------[ END ]--------------------------------