NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX) NDIS Driver for IBM PC LAN Program Workstation Installation =========================================================== PRE-INSTALLATION Before installing the NOS or network applications, you should first run NDCONF1 to configure and diagnose the Instant-Link adapter(s). We recommend you to select "Update CONFIG.SYS" in the "Configuration Menu" before exiting NDCONF1. INSTALLATION PROCEDURE 1) At the DOS prompt, insert the IBM LAN Support Program (LSP) Version 1.30 (or later) diskette. 2) Type: DXMAID 3) Press the Enter key three times. The Environment Information screen appears. 4) Specify the following values for the fields on this screen: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\lsp 5) Press Enter to store your choices. The program prompts you to install the option diskette. 6) Insert the NDC Setup Diskette in your source drive and specify the path: A:\NDIS. 7) Press Enter. The necessary files are copied from the "Instant-Link ND51XX Setup Diskette" to your target directory on your computer's hard disk. 8) Press Enter three times. 9) Insert the LSP diskette and press Enter. The Current Configuration screen appears with the NE2000 Ethernet adapter and protocols already selected. 10) Press F4. LSP is installed. 11) Use any text editor to edit the CONFIG.SYS file. Specify at least 20 files in the FILES= line; for example: files=20 Edit PROTOCOL.INI in C:\LSP to set the values of "INTERRUPT" and "IOBASE" in [NE2000_NIF] to match what you specified by NDCONF1. Once you save your CONFIG.SYS and PROTOCOL.INI files, reset your computer. 12) Insert the PC LAN Install Diskette. 13) Type: INSTALL 14) Press Enter. 15) Press Enter three more times. 16) Select the level of function for this workstation, either "Basic Services" or "Extended Services". Most of the time, select the second option. 17) Specify "Workstation". 18) Specify either "Send messages" or "Send, receive, and log messages" options. Most of the time, select the second option. 19) Specify the target path for the PC LAN files. The default pathname is C:\DOS. 20) Specify the machine's ID and the domain ID. The domain ID must be the domain server ID and must be the same for all workstations on the network. 21) Follow the prompts to complete the installation until you reach the, Change System Configuration File screen. Usually, you should accept the default for the system configuration file. The Change System Batch File screen appears. Usually you should accept the default. NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX) NDIS Driver for IBM PC LAN Program Server Installation ====================================================== PRE-INSTALLATION Before installing the NOS or network applications, you should first run NDCONF1 to configure and diagnose the Instant-Link adapter(s). We recommend you to select "Update CONFIG.SYS" in the "Configuration Menu" before exiting NDCONF1. INSTALLATION PROCEDURE 1) At the DOS prompt, insert the IBM LAN Support Program (LSP) Version 1.30 (or later) diskette. 2) Type: DXMAID 3) Press the Enter key three times. The Environment Information screen appears. 4) Specify the following values for the fields on this screen: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\lsp 5) Press Enter to store your choices. The program prompts you to install the option diskette. 6) Insert the NDC Setup diskette in your source drive and specify the path: A:\NDIS. 7) Press Enter. The necessary files are copied from the NDC Setup diskette to your target directory on your computer's hard disk. 8) Press Enter three times. 9) Insert the LSP diskette and press Enter. The Current Configuration screen appears with the NE2000 Ethernet adapter and protocols already selected. 10) Press F4. LSP is installed. 11) Use any text editor to edit the CONFIG.SYS file. Specify at least 20 files in the FILES= line; for example: files=20 Edit PROTOCOL.INI in C:\LSP to set the values of "INTERRUPT" and "IOBASE" in [NE2000_NIF] to match what you specified by NDCONF1. Once you save your CONFIG.SYS and PROTOCOL.INI files, reset your computer. 12) Insert the PC LAN Install Diskette in your computer's diskette drive. 13) Type: INSTALL 14) Press Enter. 15) Press Enter three more times. 16) Select the level of function for this workstation, either "Basic Services" or "Extended Services". Most of the time, select the second option. 17) Specify "Server". 18) Specify either "Send messages" or "Send, receive, and log messages" options. Most of the time, select the second option. 19) Specify the target path for the PC LAN files. The default pathname is C:\DOS. 20) Specify the machine's ID and the domain ID. The domain ID must be the domain server ID and must be the same for all workstations on the network. 21) Follow the prompts to complete the installation until you reach the Change System Configuration File screen. Usually, you should accept the default for the system configuration file. The Change System Batch File screen appears. Usually you should accept the default.