NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
NDIS Driver for Microsoft LAN Manager DOS Requester Installation
================================================================

PRE-INSTALLATION


     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


A. Installation Procedure for LAN Manager V2.0
--------------------------------------------------

INSTALLATION PROCEDURE

1)   Type "Setup" in Lan Manager directory (usually C:\LANMAN.DOS).
     Press <Enter>.

2)   Press <Enter>.

3)   Choose "Select Network Drivers" in "Action". Press <Enter>.

4)   Select "Novell NE2000 Ethernet Adapter", then press <Add
     driver> button, and press <Add protocol>, press <OK>.
     Workstation Primary parameters appear, press <OK>.

5)   Press <OK> three times.

6)   Choose "Save" in "Action".

7)   Press <F3> to Exit.

8)   Edit the PROTOCOL.INI in C:\LANMAN.DOS to set the "INTERRUPT"
     and "IOBASE" under [NE2000_NIF]. Must match the NDCONF1 settings.

9)   Reboot your computer.

          This completes the installation procedure.

B. Installation Introduction for LAN Manager V2.1 (or later)
-------------------------------------------------------------

INSTALLATION PROCEDURE

1)   Type "LMSETUP" in LAN Manager directory (usually
     C:\LANMAN.DOS). Press Enter.

     Microsoft LAN Manger Setup will appear.

2)   Choose "Network Drivers..." in " Configuration ". Press Enter.

3)   Choose <Add New Configs> ,press Enter.

     Network Adapter Driver appears.

4)   Select "Novell NE2000 Ethernet Adapter". Push <OK> button.

5)   Press the SPACEBAR to select the protocol what you want.

6)   Push <OK> button.

     Configuration Complete appear.

7)   Push <Save> button.

8)   Press "F3" to exit.

9)   Press Enter.

10)  Edit the PROTOCOL.INI in C:\LANMAN.DOS, and set the "INTERRUPT"
     and "IOBASE" under [NE2000_NIF]. Must match the NDCONF1 settings.

11)  Reboot your computer.

     This completes the installation procedure.