NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
ARTISOFT LANtastic/AI 4.1 Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Run the LANtastic installation program.

          A:install

2)   Select "Novell NE2000 16-bit ISA bus or Compatible" for
     "Network Adapter Installed:" in the installation menu.

3)   Follow the instructions guided by the Installation program to
     finish the installation process.

4)   Edit "STARTNET.BAT" (usually in C:\LANTASTI) to set the
     "IRQ" and "IOBASE".

          "NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"

     Must match the NDCONF1 settings.

     This completes the installation of LANtastic/AI 4.1.


NDC Instant-Link Ethernet PCMCIA Adapter (ND51XX)
ARTISOFT LANtastic 6.0 Installation
=================================================

PRE-INSTALLATION

     Before installing the NOS or network applications, you should first
     run NDCONF1 to configure and diagnose the Instant-Link adapter(s).
     We recommend you to select "Update CONFIG.SYS" in the "Configuration
     Menu" before exiting NDCONF1.


INSTALLATION PROCEDURE

1)   Run the LANtastic Installation program.

          A:install

2)   Select the "NEX016 Novell NE2000 16-bit ISA bus or Compatible"
     from the installation menu.

          Note: If you select "Support Novell NetWare", you neither
          have to nor have a chance to select a driver for your adapter
          in this step.  In this condition, you have to skip step
          4 and continue with step 5.

3)   Follow the instructions guided by the Installation program to
     finish the installation process.

4)   Edit the "STARTNET.BAT" (usually in C:\LANTASTI) to set the
     "IRQ" and "IOBASE".

          "NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE"

     Must match what you specified in NDCONF1.

     This completes the installation of LANtastic 6.0.

5)   Copy the Novell NE2000 ODI driver "NE2000.COM" to your LANtastic
     directory (usually C:\LANTASTI).

          COPY A:\NETWARE\NE2000.COM C:\LANTASTI

6)   Edit the "STARTNET.BAT" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

            :
          LOADHI LSL
          NRODI
            :

     with:

            :
          LOADHI LSL
          NE2000
            :

7)   Edit the "NET.CFG" in the LANtastic directory (usually in
     C:\LANTASTI).

     - Replace:

                 :
          LINK DRIVER NRODI
               FRAME ETHERNET_802.3
               FRAME ETHERNET_802.2
               FRAME ETHERNET_II
               FRAME ETHERNET_SNAP
                 :

     with:

                 :
          LINK DRIVER NE2000
               INT 3
               PORT 300
               FRAME ETHERNET_802.3
               FRAME ETHERNET_802.2
               FRAME ETHERNET_II
               FRAME ETHERNET_SNAP
                 :

     where the values of "INT" and "PORT" must match what you
     specified in NDCONF1.

     This completes the installation of LANtastic 6.0 with "Support
     Novell NetWare".