Installing the NetWare OS/2 Client Driver

        To install the OS/2 ODI driver, the Novell OS/2 Requester should be
  used. Load NetWare OS/2 ODI driver from the OS/2 CONFIG.SYS file in the
  sequence below. For more information on installing the OS/2 ODI driver,
  refer to the "NetWare Requester for OS/2 installation" documentation.

  1. Using the NetWare OS/2 disks provided by Novell, install the NetWare OS/2
     Requester on the OS/2 system. Follow the instructions on screen to
     configure the NetWare OS/2 Requester for a NetWare-supported LAN adapter
     board. (i.e. NE2000)
  2. Copy the OS/2 ODI driver, LCS8634.SYS, from the Driver Diskette to the
     C:\NETWARE directory.
  3. Edit the CONFIG.SYS file and replace the NetWare-supported LAN adapter
     driver with the name of the OS/2 ODI driver, LCS8634.SYS. For example:
     DEVICE=C:\NETWARE\LCS8634.SYS
  4. The default settings (PORT=300,INT=3) may be modified when the driver
     loads by creating the file NET.CFG. Also the OS/2 ODI driver may also be
     installed to support multiple protocol stacks and Ethernet frame types.