Copyright: Copyright 1998, Novell Inc. All Rights Reserved.


Phbk sync - search all trees
Choose this option if you want the update dialog to search for Corporate Dial-Up Connections in all the Directory trees that you are connected to.


Phbksync - overwrite modified entries
Check this check box if you want Corporate Dial-Up Connections which you have modified to be included in the update.

If you check this box, the update overwrites the modified connections and you lose the changes you have made.


Phbksync - tree list
Lists the selected Directory trees and subtrees. All selected trees that you are connected to are searched for Corporate Dial-Up Connections.

Trees or subtrees which are grayed out in the list are not searched (these are trees that you selected for search on a previous occasion but which you are not currently connected to).

If you have selected a particular Dial-Up Connection, no search takes place and only that connection is copied into your Windows 95 Networking folder.

To remove an item from the list, highlight the item and choose Remove (you can remove an item whether or not you are currently connected to it).


Trademarks, Copyright, Disclaimer, and Patents

Copyright © 1994-1998 Novell, Inc.  All rights reserved.  No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of the publisher.

U.S. Patent Nos. 5,349,642; 5,594,863; 5,633,931; and 5,692,129.  U.S. and International Patents Pending.

Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.  Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any NetWare software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.  Further, Novell, Inc. reserves the right to make changes to any and all parts of NetWare software, at any time, without any obligation to notify any person or entity of such changes.

Novell Trademarks

NetWare is a registered trademark of Novell, Inc. in the United States and other countries.

NetWare/IP is a trademark of Novell, Inc.


grclogin - change password button
Choose this if you want to change your dial-in password.


grclogin - close button
Closes the dialog and, if you changed your dial-in password, saves the new password.


grclogin - confirm password
Enter your new password again to verify it.


grclogin - new password
Enter the new password you want to use.


grclogin - password
Enter the password that you dial in with. (This is not necessarily the same as the password that you use to log in to the network.)


grclogin - query status button
Indicates how many days are left before your dial in password expires. If your password has already expired, you are told how many grace login opportunities you have to change it.


grclogin - server
Select the remote tree, or other dial-in point, that you are logged in to.


grclogin - username
Enter the username that you dial in with. (This is not necessarily the same as the username that you use to log in to the network.)


nwip properties - add button (nearest)
Adds the specified server to the list of nearest servers.


nwip properties - add button (preferred)
Adds the specified server to the list of preferred servers.


nwip properties - auto detect
Automatically detects your NetWare*/IP* configuration.

To use this option, the Dynamic Host Configuration Protocol (DHCP) must be configured to provide NetWare/IP parameters. The protocol defines the rules by which an IP address is assigned when a workstation requests one.


nwip properties - broadcast request
To have the NetWare*/IP* client find the Nearest NetWare Server by broadcasting the request on the local network, check this check box.

To have the NetWare/IP client find the Nearest NetWare Server by sending the request to a Domain SAP/RIP Server (DSS), uncheck this box.

This is an optional setting for NetWare/IP.


nwip properties - custom config
Choose this option if you want to customize the NetWare*/IP* parameters for this connection, or if the Dynamic Host Configuration Protocol (DHCP) is not configured to provide the parameters automatically.


nwip properties - domain name
Enter the NetWare*/IP* domain name that you want to access.

This is a required setting for NetWare/IP.


nwip properties - edit list (nearest)
Lists any servers currently selected as nearest servers for this connection.


nwip properties - edit list (preferred)
Lists any servers currently selected as preferred servers for this connection.


nwip properties - nearest servers
You can specify up to five nearest NetWare*/IP* servers. Specify the server names as hostnames, fully qualified hostnames, IP addresses or IP address masks.

This setting is used as a guide for locating the nearest NetWare/IP servers. If none of the specified servers is available, the Domain System Server (DSS) provides others to use.


nwip properties - netware/ip 1.1
If your servers are running NetWare*/IP* 1.1 pre-patch, check this check box. Upgrade with the patch or to version 2.1. Then uncheck this box.

This is an optional setting for NetWare/IP.


nwip properties - parameters option
Specifies NetWare*/IP* configuration parameters for this connection.


nwip properties - preferred domain servers
You can specify up to five preferred Domain SAP/RIP servers. Specify the server names as hostnames, fully qualified hostnames, IP addresses or IP address masks.

This setting is used as a guide for locating preferred Domain SAP/RIP servers. If none of the specified servers is available, NetWare*/IP* queries the Domain Name Service (DNS) for its Domain SAP/RIP Server list.


nwip properties - remove button (nearest)
Removes the selected server from the list of nearest servers.


nwip properties - remove button (preferred)
Removes the selected server from the list of preferred servers.


nwip properties - replace button (nearest)
Replaces the selected server with the specified server.


nwip properties - replace button (preferred)
Replaces the selected server with the specified server.


nwip properties - retries to DSS
Enter the number of times that an unanswered request to DSS should be retried.

This is an optional setting for NetWare*/IP*.

Range: 0 to 10 (retries)


nwip properties - seconds between retries
Enter the number of seconds to wait between retries of an unanswered request to DSS.

This is an optional setting for NetWare*/IP*.

Range: 5 to 60 (seconds)


nwip properties - servers option
Specifies any nearest servers or preferred servers to be used by this connection.


phbk sync - search local partitions
Choose this option if you want to limit the search for Corporate Dial-Up Connections to just the local partitions of the Directory trees that you are connected to. If you do this, you do not have to wait while the entire tree is searched.


phbk sync - search these trees
Choose this option to specify particular Directory trees or sub-trees to be searched for Corporate Dial-Up Connections, or to specify a particular Corporate Dial-Up Connection. If you do this, you do not have to wait while the entire tree is searched.


phbksync - add button
Adds the currently selected item to the search list.


phbksync - close progress when synchronized
Check this check box if you want the update progress bar to close automatically after the Corporate Dial-Up Connections update is complete.


phbksync - hide progress bar
Check this check box to minimize the window in which the update progress bar is displayed. The progress bar indicates the current status of the update as it is running.


phbksync - remove button
Removes the selected item from the search list.


phbksync - tree selection
Use this selection box to select particular Directory trees or Organizational Units to be searched when updating Corporate Dial-Up Connections, or to select one or more specific connections to be updated.

To select an item, highlight the item in the list and choose Add. Repeat until all the items you require are selected. Selected items appear in the Trees/Subtrees to Search list.

To cancel a selection, highlight the item and choose Remove.


phbksync - update button
Starts the update process and closes this dialog box.