Novell Help Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc.  All Rights Reserved.
#·╛·│├╒ ╗!Æ1l3ΦC$M╝NpPQ┘Q╕R╕Y#]^┬_3bpcâeΩfihTjk{ln┘omq▒r(tHuΦx╝yªzé8Ç╣üíéïâüànååç▄êWî'ì	Ä╝Ä_ÅæmÆδô╓ö║ûàÿ╫ÖC£₧¥Ö₧ïáⁿ▒)│.╡l┼Y╞¥╚ƒ╠╪╬┘╥Σ╙δ╒'█J▌▐ ▀ßâπÿσƒΦ⌐Θ╧δ┬φ%±δ⌠┴⌡╠≈2∙÷·╔√ⁿz²╝■MÄ|Θ	6
▓FΦ,åJs[!ï#((x*ì.╤0ì5T:?<4>u?sA┐C╙EtI█L%O[R¿VxZ╠_╬a∩d√{Dü¥éàkê≡îÅ├Éô▄ö°úç½╥¡¼░Ç│>╕|║P╝╛y└]┬[─▓╟■╩═╧─╤╓╒7┌+▌<Γ∙π&τ	Y
,/h4w6R8;î>╖@?BjDtF±GtIⁿJ
P∞PRxTW╟WúX·Z9\┘\ü]º^;b┴GE»                      AVAILABLE TOPICS HELP

This menu lists the topics that you can examine or change
while using SYSCON.  To choose a topic, use the UP and DOWN arrow 
keys to highlight it; then press the SELECT key.  The following help
screens describe each topic briefly. 

While you are in help, you may use the PAGEDOWN and PAGEUP
keys to change the current page.  You may press the HELP key a
second time to list the keys that can be used in SYSCON, along
with where they are located on the keyboard of the machine you
are using.  To exit help and return to the menu of available
topics, press the ESCAPE key.
     
                                                     Page 1 of 7n	·NLò                          AVAILABLE TOPICS HELP

ACCOUNTING

The "Accounting" option to allow the file server to charge users for their
use of file server resources.  Only high-end versions of Advanced NetWare
will support accounting.  The accounting option allows you to

     1)  Install accounting on a file server that supports it.  (You must 
         have supervisor rights.)
     2)  See what file server services are being charged for and the
         amount that is being charged.  If you have supervisor rights, 
         you can change what services are being charged for and the amount.
     3)  See who is allowed to charge for file services.  If you have 
         supervisor rights, you can specify who can charge for services.  
         This allows external objects such as print servers to charge
         users for services.
                                                              Page 2 of 7┴NLÖ                           AVAILABLE TOPICS HELP

CHANGE CURRENT SERVER

You may use the "Change Current Server" option to

     1)  List the servers you are logged in to.
     2)  Log in to additional servers.
     3)  Log out from additional servers*.
     4)  Select the current server.  (The server and your username will 
         appear in the header at the top of the screen).
     5)  Change to a different user on a server that you are logged in to*.

* You cannot log out from the server you were using when you ran the
SYSCON program or change to a different user on that server.

                                                              Page 3 of 7Vn	?=                 AVAILABLE TOPICS HELP

FILE SERVER INFORMATION

You may use the "File Server Information" option to  

     1)  List the file servers that are attached to your    
         network.
     2)  View information about the configuration of any    
         file server in the list.
     3)  View the number of users currently attached to any 
         file server in the list.
     4)  See what version of Advanced NetWare any file      
         server in the list is running.

                                         Page 4 of 7Φ
;
9z               AVAILABLE TOPICS HELP

GROUP INFORMATION

You may use the "Group Information" option to 

     1)  List the groups that exist on the selected    
         file server.
     2)  Examine information about each of these groups.
     3)  Change the group information (ONLY if you have
         supervisor privileges).

                                     Page 5 of 7GV	>
<G                   AVAILABLE TOPICS HELP

SUPERVISOR OPTIONS

This brings up a menu of options that are available ONLY if
you have supervisor privileges.  The options that are
available will depend on what level of Advanced NetWare the
selected file server is running.

                                              Page 6 of 7Φ
;9T               AVAILABLE TOPICS HELP

USER INFORMATION

You may use the "User Information" option to  

     1)  List all users on the selected file server.
     2)  View information about each user.
     3)  Change the user information (ONLY if you have  
         supervisor privileges).

                                      Page 7 of 71	/°            KNOWN NETWARE SERVERS HELP

This menu lists the file servers currently
on your network.  To obtain information about
any of these file servers, highlight its name
and press the SELECT key.

                                   Page 1 of 1EC>                    FILE SERVER INFORMATION HELP

This screen shows information about the highlighted file server. 
A description of this information follows.

SERVER NAME
     The name that the file server is known by on the network.

NETWARE VERSION
     The version of Advanced NetWare the file server is using.

SYSTEM FAULT TOLERANCE
     The level of SFT that the server is running. This
     information will not appear for file servers that are running
     a version prior to Advanced NetWare v2.10.

                                                     Page 1 of 4<├H
F                      FILE SERVER INFORMATION HELP

TRANSACTION TRACKING
     This entry shows if the file server has support for TTS recovery
     for database files in the event of failure by the file server,
     workstation, or network.  This entry will not appear if the file
     server is running a version prior to Advanced NetWare v2.10.

CONNECTIONS SUPPORTED
     The maximum number of users that can be logged in to the file
     server at once.

                                                     Page 2 of 48LJΣ                      FILE SERVER INFORMATION HELP

CONNECTIONS IN USE
     The number of users currently logged in to the file server.

VOLUMES SUPPORTED
     The maximum number of disk volumes the file server can support.

NETWORK ADDRESS
     The address of the network on which the file server is located.

NODE ADDRESS
     The address of the node within the network where the file server    
     resides.

                                                            Page 3 of 4<	=;┬                 FILE SERVER INFORMATION HELP

If you are a SUPERVISOR on the selected file server,
you will also see the following:

SERIAL NUMBER
     The serial number of the file server.

APPLICATION NUMBER
     The application number of the file server.

When you buy serialized software for your file server,
your vendor may ask for both the serial number and the
application number. 

                                               Page 4 of 4┬97ÿ                   USER NAMES HELP

This menu lists the users defined on the current
file server.  To view information about any of these
users, highlight the desired user's name and press the
SELECT key.

If you have supervisor privileges on the current
file server, you can change the list of usernames. 
See the next screen for a list of your options.

                                         Page 1 of 3áMK╞                            USER NAMES HELP

If you have supervisor privileges on the current file server, you
also have the following options:

     INSERT
          Add a new user.

     DELETE
          Remove the highlighted user.  To delete several users all at               once, highlight them with the MARK key and press the DELETE key.

     MODIFY
          Rename a user.

                                                          Page 2 of 3┬
5	3                   USER NAMES HELP

Some information can be changed for several
users at the same time.  To change information for
more than one user, mark each user that you want
changed using the MARK key; then press the SELECT
key.

                                      Page 3 of 3		42╬                 DELETE USER HELP

To delete the highlighted user from the
current file server, answer YES.  Otherwise, 
answer NO or press the ESCAPE key.

                                      Page 1 of 1Ü$HF╟                        USER INFORMATION HELP

This menu lists all the information you can obtain about this user.  
To view the information, highlight the desired option and press the 
SELECT key.  A brief description of each option that may appear is 
given below.  The actual options that will appear depend on what 
rights you have, what user you are examining, and what features the 
file server supports.

ACCOUNT_BALANCE
     Shows the user's current account balance and credit limit.
     This option appears if the file server supports accounting
     and you have supervisor privileges or you are logged in as
     the selected user.

                                                       Page 1 of 7;'╗!HFë                         USER INFORMATION HELP

ACCOUNT RESTRICTIONS
     Shows restrictions that have been placed on the user's account.
     This option will appear if you have supervisor privileges or if
     the selected user is the user that you are logged in as.

CHANGE PASSWORD
     Allows you to change the password that is used when logging in.
     The "Change Password" option appears if you have supervisor
     privileges or you are logged in as the selected user and your 
     account restrictions have the "Allow User To Change Password"
     option set to YES.

                                                          Page 2 of 7N)Ü$HF√                         USER INFORMATION HELP

FULL NAME
     Shows the user's full name. This option always appears.

GROUPS BELONGED TO
     Lists all the groups that the user is a member of.  This option
     always appears.

INTRUDER LOCKOUT STATUS
     Shows the intruder lockout status for this user's account.  This
     option appears only if you have supervisor privileges and the
     intruder detection option has been enabled.

                                                       Page 3 of 7+;'I
G⌐                         USER INFORMATION HELP

LOGIN SCRIPT
     Allows you to view and edit the user's login script.  This option
     appears only if you have supervisor privileges or if the selected
     user is the user that you are logged in as, and if your account
     restrictions have the "Allow User To Change Password" option set 
     to YES.

                                                         Page 4 of 7╜-N)JHû                        USER INFORMATION HELP

OTHER INFORMATION
     Shows additional information about the selected user including the
     last time the user logged in, the amount of disk space the user
     is using, the user's bindery ID number, etc.  This option appears
     only if you have supervisor privileges or you are logged as the 
     selected user.

SECURITY EQUIVALENCES
     Lists all other users and groups to which the selected user is
     security equivalent.  This option appears only if you have
     supervisor privileges or you are logged in as the selected user.

                                                          Page 5 of 7/+I	G@                        USER INFORMATION HELP

STATION RESTRICTIONS
     Shows what network addresses this user is allowed to log in from.
     This option appears only if you have supervisor privileges or
     you are logged in as the selected user.


                                                        Page 6 of 7╜-LJe                        USER INFORMATION HELP

TIME RESTRICTIONS
     Shows the times during the week when the selected user is allowed
     to be logged in to the file server.  This option appears only if
     you have supervisor privileges or you are logged in as the selected 
     user. 

TRUSTEE DIRECTORY ASSIGNMENTS
     Lists all directories where the user's trustee rights have been 
     explicitly granted or revoked.  This option appears only if you
     have supervisor privileges or you are logged in as the selected 
     user. 

                                                         page 7 of 79
7┬               WORKGROUP MANAGERS HELP

This is a list of all users that are currently
workgroup managers.  Workgroup managers have the
right to create new user accounts, groups, and queues.
Workgroup managers are automatically granted manager
rights over the users, groups and queues that they
create.

Use the DELETE key to remove users from the list or 
the INSERT key to add users to the list.

                                        Page 1 of 1╣6LJ5                          SUPERVISOR OPTIONS HELP

DEFAULT ACCOUNT BALANCE/RESTRICTIONS

This option will appear if the version of Advanced NetWare that the file
server is running supports the new security restrictions.  This option 
allows you to

     1)  View the security restriction defaults for a newly created user.
     2)  Change the security restriction defaults.  Note: Changing 
         the security restriction defaults will not affect any 
         existing users.
     3)  If the version of Advanced NetWare that the file server is 
         running supports the accounting features and accounting has 
         been installed on the file server, you can also view and 
         change the default account balance for new users.

                                                              Page 1 of 7

?9l3KIn                         SUPERVISOR OPTIONS HELP

DEFAULT TIME RESTRICTIONS

This option will appear if the version of Advanced NetWare that the file
server is running supports the new security restrictions.  This option
allows you to

     1)  View the default times when a new user will be able to 
         log in.
     2)  Change the default login time restrictions.  Note: Changing 
         the default login time restrictions will not change the login 
         time restrictions of any user account that has already been 
         created.

                                                             Page 2 of 7
;╣6GE⌐                        SUPERVISOR OPTIONS HELP

EDIT SYSTEM AUTOEXEC FILE

The system AUTOEXEC file is a file which contains console commands
that the file server should "automatically execute" when it is first
brought up.  This option allows you to

     1)  View the system AUTOEXEC file.
     2)  Add or delete console commands from the AUTOEXEC file.

                                                         Page 3 of 7L=?9FD4                      SUPERVISOR OPTIONS HELP

FILE SERVER CONSOLE OPERATORS

This option will only appear if the level of Advanced NetWare that
the file server is running supports the file server virtual console
features.  This option allows you to

     1)  View what users and groups have been authorized to 
         run the file server console from a workstation they 
         are logged in to.
     2)  Authorize or revoke a user or group's rights to run 
         the file server console.

                                                       Page 4 of 7π?;GE                        SUPERVISOR OPTIONS HELP

INTRUDER DETECTION/LOCKOUT

This option will appear only if the version of Advanced NetWare that
the file server is running supports the new security restrictions. 
This option allows you to

     1)  See if the file server is tracking when an intruder 
         trys to break in to an account.
     2)  Specify the criteria for the file server to determine 
         how many incorrect login attempts constitute an intruder.
     3)  Specify if the file server should lock an account if it 
         detects an intruder.

                                                        Page 5 of 7PBL=KIU                         SUPERVISOR OPTIONS HELP

SYSTEM LOGIN SCRIPT

The system login script is a script that is run for all users when they
log in to the file server before the user's individual login script is
run.  The system login script is an ideal place to put messages that all
users should see when they log in, or enter login script commands that
every user should execute when logging in.  This option allows you to

     1)  View the system login script.
     2)  Change the commands in the system login script.

                                                            Page 6 of 7π?GEÇ                        SUPERVISOR OPTIONS HELP

VIEW FILE SERVER ERROR LOG

The file server error log is a file where all serious errors that
occur while the file server is running are recorded.  This option
allows you to

     1)  View the errors that are recorded in the error log.
     2)  Clear the error log.

                                                         Page 7 of 7+GLJ+                              ACCOUNTING HELP

This menu gives you the following options:

ACCOUNTING SERVERS
     This option shows you who is authorized to charge for their               services.  If you have supervisor privileges, you can use this            option to give a new server the right to charge or to remove a            server's right to charge.

BLOCKS READ CHARGE RATES
     This option shows you if the file server is charging for the amount       of data read from the file server and if the file server is charging      for reading, the amount being charged is shown.  If you have              supervisor privileges you can change when and how much the file           server charges for reading data from the disk.

                                                              Page 1 of 3&JΦCLJπ                              ACCOUNTING HELP

BLOCKS WRITTEN CHARGE RATES
     This option shows you if the file server is charging 
     for writing information to the disk and the amount that 
     is being charged.  If you have supervisor privileges, 
     you can change when and how much the file server charges 
     for writing to the disk.

CONNECT TIME CHARGE RATES
     This option will show you if the file server is charging 
     for the amount of time that someone is connected to it and 
     the amount that is being charged.  If you have supervisor 
     privileges, you can change when and how much the file
     server charges for connect time.

                                                              Page 2 of 3+GLJµ                               ACCOUNTING HELP

DISK STORAGE CHARGE RATES
     This option shows you if the file server is charging 
     for the amount of data that is stored on its disk drives 
     and that amount is being charged.  If you have supervisor 
     privileges you can change when and how much the file server 
     charges for disk storage.

SERVICE REQUESTS CHARGE RATES
     This option shows if the file server is charging for the 
     number of requests sent to it from a workstation and the 
     amount that is being charged.  If you have supervisor 
     privileges, you can change when and how much the file 
     server charges for requests.

                                                              Page 3 of 3A
?Ç                 SELECT ACCOUNT SERVER TYPE HELP

Different types of servers can provide services on a network.
You should highlight the type of the server that you want to 
authorize to charge, and then press the SELECT key.

Press the ESCAPE key to return to the list of authorized
servers without adding a new server.

                                                   Page 1 of 1
<
:£                      FULL NAME HELP

Type the full name of the user or group; then press the SELECT key or the ESCAPE key.

If the user or group already has a full name, use the
BACKSPACE key to delete it; then type the new name.

If you changed the full name but do not want to save the changed name, press the CANCEL key to restore the original name.

                                              Page 1 of 1
1/z           INSERT NEW USER NAME HELP

     Enter the name of the new user.

                                   Page 1 of 1	
	53┐                   USER NAME HELP

Use the BACKSPACE key to delete the user's old
name.  Type the user's new name and press the
SELECT key.

                                       Page 1 of 1
:8╟                    FULL NAME HELP

This inset shows the full name of the user or group.
To return to the previous menu, press the ESCAPE key.

                                            Page 1 of 1SVLJâ                           OTHER INFORMATION HELP

This screen shows other information about the selected user or group. 
Each field that may appear on this screen is described below.

LAST LOGIN
     This information will appear only when you are getting information        about a user.  The last date that the user logged in to the file          server is shown.  If the user has not logged into the file server         since his account was created, the message "Unknown" will be shown.

FILE SERVER CONSOLE OPERATOR
     This information will appear only if the level of Advanced 
     NetWare v2.1 that the file server is running supports the file 
     server console features.  It displays whether the user or group has 
     been given authorization to perform file server console functions 
     from a workstation.
                                                              Page 1 of 2╕RLJM                           OTHER INFORMATION HELP

MAXIMUM DISK SPACE
     This option will appear only if you are getting information about a       user and the file server is enforcing disk space limitations.  The        maximum amount of disk space that the user can use will be shown in       kilobytes (1 kilobyte is 1024 bytes).  If the user does not have a        maximum restriction, the entry will show "Unrestricted."

DISK SPACE IN USE
     This option will appear only if you are getting information about a       user.  The amount of disk space that is being used by files owned by      the selected user is shown in kilobytes (1 kilobyte is 1024 bytes).

USER ID (or GROUP ID)
     This option shows the bindery ID number of the selected user or 
     group.
                                                             Page 2 of 2ä[J
H┤                  SET MULTIPLE USER INFORMATION HELP

This menu allows you to change information for all the users that
are marked.  Each option is described below.

ACCOUNT BALANCE
     Lets you change the account balance and credit limit for all the
     marked users.

ACCOUNT RESTRICTIONS
     Lets you change the account restrictions of all the marked users.

                                                            Page 1 of 2╕Y
IGç                  SET MULTIPLE USER INFORMATION HELP

STATION RESTRICITONS
     Lets you specify what stations all the marked users can log in         to.

TIME RESTRICTIONS
     Lets you change the times of the week when the marked users can        be logged in.
                                                       
                                                           Page 2 of 2

	><╤                    LOG OUT FROM SERVER HELP

To log out from the highlighted file server, answer YES.
Otherwise, answer NO or press the ESCAPE key.

                                                Page 1 of 1
64₧                 CHARGE RATE HELP

Highlight the charge rate that you want to apply
during the selected time period and press the SELECT key.

If the charge rate that you want to apply during the selected time period is not shown, select the "Other Charge Rate" option and press the SELECT key.

If you do not want to change the charge rate, press the ESCAPE key.

                                      Page 1 of 1:8Y           LOGIN TIME MUST BE ALLOWED HELP

You have set the time restrictions so the the user
cannot be logged in at any time during the week.  If
you do not want the user to log in, you should
disable the account.  Since time restrictions are
enforced on the supervisor's account, SYSCON tries to
protect you from making a mistake and locking the
supervisor (or any other user) out of his account by
not allowing any time periods in which he can be logged
in.

Mark some time periods when the user should be
able to log in with an asterisk (*).

                                          Page 1 of 1	
:8%             NO STATION RESTRICTIONS HELP

No station restrictions have been placed on this
account.  This user can log in from any workstation 
on the internetwork.  Only the supervisor can restrict 
what stations a user can log in from.

                                          Page 1 of 1
CA√                    STATION RESTRICTIONS HELP

This list shows network addresses where the selected user
is allowed to log in from.  If the list is empty, the user can
log in from any workstation.  If the list is not empty, the user
can only log in from workstations whose address is included in
the list.  Addresses are shown as a network number and a node
number.  You can also allow the user to log in from any node on 
a specified network.

                                                   Page 1 of 12
0O         INVALID NETWORD ADDRESS HELP

Network addresses must be with in the range from 1 to FFFFFFFE.  You have entered a number outside this range.  Check the address of the workstation where you want to allow this user to log in and re-enter the correct network portion of the address.

                                  Page 1 of 1?	=g                  SECURITY EQUIVALENCES HELP

This menu lists the users and groups that the selected
user is security equivalent to.  (The selected user has all
the rights of the users and groups to which he is security
equivalent, in addition to the rights explicitly granted him
or her as a user.)

                                               Page 1 of 1	
=;╙               OTHER USERS AND GROUPS HELP

This menu lists the users and groups that the selected user is not security equivalent to.  To make the user security equivalent to a user or group, highlight the
desired user or group and press the SELECT key.  To make
the user security equivalent to more than one user or
group, highlight the desired users and groups with the
MARK key; then press the SELECT key.

                                             Page 1 of 1
31û             GROUPS BELONGED TO HELP

This menu lists the groups to which the selected user belongs.

                                     Page 1 of 1
5
3a                 OTHER GROUPS HELP

This menu lists the groups that the current
user is not yet a member of.  To add the selected
user to a group, highlight the group and press the
SELECT key.  To add the user to several groups,
highlight the desired groups with the MARK key;
then press the SELECT key.

                                     Page 1 of 1:
8{           TRUSTEE DIRECTORY ASSIGNMENTS HELP

This menu lists the directories in which the
highlighted user or group's trustee rights have been
explicitly granted or revoked.  (Trustee rights extend
to each subdirectory of the directory in which they are
declared, unless they are specifically changed in the
subdirectory.)

                                          Page 1 of 1@>│                  GRANTED TRUSTEE RIGHTS HELP

This menu lists the rights currently granted to the user
or group in the highlighted directory.  You have the
following options:

INSERT
     Grant additional rights.

DELETE
     Revoke the highlighted right.  To revoke several rights 
     simultaneously, highlight the rights with the MARK key
     and press the DELETE key.

                                                Page 1 of 1B
@|                    OTHER TRUSTEE RIGHTS HELP

This menu lists the rights that have not been granted to
the user or group in the highlighted directory.  

To grant any of these rights, highlight the right and press
the SELECT key.  To grant several rights, highlight them with
the MARK key and press the SELECT key.

                                                    Page 1 of 1	
97,         ALL NODES ARE ALREADY ALLOWED HELP

You have already specified that the user can
log in from all nodes on this network.  If you want
to limit the user to specific nodes on the network,
you must delete the entry that allows all nodes first.

                                       Page 1 of 1
6
4_            EXISTING SUBDIRECTORIES HELP

This menu lists the subdirectories of the volume 
or directory you have specified.  Highlight the 
subdirectory which is part of the directory path 
leading to the directory in which you wish to make 
the user or group a trustee.  Then press the 
SELECT key.

                                      Page 1 of 1	
1/      DUPLICATE STATION RESTRICTION HELP

The address you have just entered is already in the list of addresses that the user is allowed to log in from.  You cannot enter the same address into the list more than once.

                                  Page 1 of 1≥v

<:Æ                     GROUP NAMES HELP

This menu lists the groups on the current file server.  To learn more about any of these groups, highlight that group and press the SELECT key.

If you have supervisor privileges on the current file server, you can also modify the groups shown.  For a
description of available options, see the next screen.

                                            Page 1 of 2Hu	=
;▐                   EXISTING GROUPS HELP

If you have supervisor privileges on the current file
server, you also have the following options:

     INSERT    Add a new group.
     DELETE    Delete the highlighted group.  To delete   
               several groups simultaneously, highlight   
               them with the MARK key and press the     
               DELETE key. 
     MODIFY    Rename the highlighted group.

                                             Page 2 of 2

64╝                    GROUP NAME HELP

Type the name of the group you wish to create on
the current file server and press the SELECT key.

                                        Page 1 of 1

;9╥                      GROUP NAME HELP

Use the BACKSPACE key to erase the group's old name.
Then type the group's new name and press the SELECT key.
     
                                            Page 1 of 1d|	><ª                 GROUP INFORMATION HELP

This menu shows information about the selected group.  To view the information, highlight the desired option and press the SELECT key.  A brief description of each option follows.

FULL NAME
     Displays the group's full name.

MEMBER LIST
     Lists the users on the current file server that belong
     to this group.

                                                Page 1 of 3<~ªzHF└                       GROUP INFORMATION HELP

The following option is displayed ONLY if you belong to the group selected or have supervisor privileges on the current file server.


OTHER INFORMATION
     Shows the group ID number.  If the current file server supports
     the virtual console features, shows whether the group has been
     given console operator rights.


     
                                                        Page 2 of 3d|	
HF.                       GROUP INFORMATION HELP

TRUSTEE DIRECTORY ASSIGNMENTS 
     Lists the directories (on the current file server) in which
     the group has trustee rights, along with the rights granted in
     each directory.

                                                          page 3 of 3
	=;₧                   GROUP MEMBERS HELP

This list shows the users that belong to the selected
group.
                                               Page 1 of 197i                    OTHER USERS HELP

This menu lists the users on the file server that
are not members of the highlighted group.  

To add a user to the group, highlight the user and
press the SELECT key.

To add more than one user to the group, highlight
them with the MARK key and press the SELECT key.

                                           Page 1 of 1		97╨                   DELETE GROUP HELP

To delete the highlighted group(s) from this file
server, answer YES.  Otherwise, answer NO or press the
ESCAPE key.

                                         Page 1 of 1

<:╥                DELETE USER FROM GROUP HELP

To remove the highlighted users from the selected
group, answer YES.  Otherwise, answer NO or press ESCAPE.

                                             Page 1 of 1@>▐               DELETE TRUSTEE FROM DIRECTORY HELP

To delete the highlighted trustee from the highlighted
directory, answer YES.  Otherwise, answer NO or press the
ESCAPE key.
 
When a trustee is deleted from a directory, the trustee's
rights revert to the rights the trustee has in the parent
directory.  Thus, if no trustee rights were declared in the
parent directory, the trustee will no longer have any rights.

                                                  Page 1 of 1		75╒              DELETE USER FROM GROUP HELP

To delete the current user from the highlighted
group(s), answer YES.  Otherwise, answer NO or press
the ESCAPE key.

                                         Page 1 of 1		:8             DELETE SECURITY EQUIVALENCES HELP

To delete the current user's security equivalences
with the highlighted user(s) and group(s), answer YES. 
Otherwise, answer NO or press the ESCAPE key.

                                           Page 1 of 14
2>             BAD NODE ADDRESS HELP

Node addresses must be within the range
from 0 to FFFFFFFFFFFE.  You have entered a
number outside this range.  Check the address
of the workstation that you want to allow this
user to log in from and re-enter the correct node
address.

                                  Page 1 of 1KIc                  SUPERVISOR STATION RESTRICTION HELP

Station restrictions are enforced on the supervisor account.  If
you accidently list invalid addresses in the list of addresses where the
supervisor is allowed to log in from, the supervisor could never log in
again.  To help prevent you from making this mistake, SYSCON has checked
to see that you can at least log in from the station that you are on
right now.

Check the addresses that you entered to make sure they are correct.
If they are incorrect, delete the incorrect entries and re-enter
them.  If they are correct but this station is not included, you
must either delete all the entries or add this station temporarily;
then go to one of the stations that you are going to allow the
supervisor to log in from and correct the list.

                                                           Page 1 of 1		20╕               FULL NAME HELP

No full name has been defined for the selected 
user or group.  (Only the supervisor can define
a full name.)

                               Page 1 of 1	
20╩            USER ALREADY EXISTS HELP

The user was not added because a user by
that name already exists on the file server.
Each user on the file server must have a unique
name. 

                Z  9c
1/¢     THE SUPERVISOR CANNOT BE DELETED HELP

The SUPERVISOR is a special user who cannot
be deleted.
        
                                   Page 1 of 1
,*ï  THE SUPERVISOR CANNOT BE RENAMED HELP

The SUPERVISOR is a special user who
cannot be renamed.

                              Page 1 of 1	>
<æ                  LOG IN TO SERVER HELP

You cannot log in to an additional file server because your station is already attached to eight servers.  (A station cannot be logged in to more than eight servers simultaneously.)  You must log out from one of the servers to which you are currently logged in before you can log in to any other servers.

                                           Page 1 of 10
.M         ACCOUNTING NOT SUPPORTED HELP

The version of Advanced NetWare that is
running on this file server does not support
the accounting features.  If you need to use
accounting features on this server you should
upgrade to a version of Advanced NetWare that
supports these features.

                                  Page 1 of 1?	=f                   ACCOUNTING WRONG VERSION

This version of SYSCON does not support the version of
accounting that this file server is running.  You have
probably run an incorrect version of SYSCON.  Check to make
sure that you ran the version of SYSCON that came with your
file server software.

                                                 Page 1 of 1		42╙           ACCOUNTING NOT INSTALLED HELP

Accounting has not been installed on this file
server.  A user must have supervisor privileges 
to install accounting.

                                      Page 1 of 1
EC╠                 FILE SERVER CAN NOT CHARGE HELP

The file server has been removed from the list of authorized
accounting servers.  It cannot charge users for any file service
or disk storage service unless its name appears in the list of
authorized accounting servers.

If you want to authorize the file server to charge for a service, 
select the "Accounting Servers" option and press INSERT.

                                                     Page 1 of 142│            USER IS ALREADY A TRUSTEE HELP

You were unable to add the selected user or
group as a trustee in the directory, because the
user or group is already a trustee in the 
directory.  

You may, however, change the user or group's
trustee rights in the directory.  To do so,
highlight the name of the directory in which the
user or group is a trustee and press the MODIFY
key.

                                      Page 1 of 1
5
3:      THE SPECIFIED VOLUME DOES NOT EXIST HELP

The trustee was not added because a nonexistent volume was specified in the directory path. 

To list the file server's existing volumes, use the BACKSPACE key to erase the directory path; then press the INSERT key.

                                      Page 1 of 1FDT                          ADD TRUSTEE HELP

The file server will not allow you to add the trustee to the
directory because you entered an incorrect directory path.   

A directory path consists of a volume name, followed by a
colon, followed by a list of directory names.  Directory names must
be separated by a slash (/) or a backslash (\), and may be up to 14
characters long.  An example of a valid directory path is
WORK:JOHN/DOCUMENTS.

Press the INSERT key to list all the subdirectories of the path 
that you have entered.

                                                      Page 1 of 13
1C               CREATE NEW USER HELP

Normally when users are created, they are
automatically added to the group EVERYONE.  An
error occurred while attempting to add the new
user to the group EVERYONE.  This error probably
occurred because the group EVERYONE has been
deleted.

                                   Page 1 of 1	
	53π                   ADD GROUP HELP

The group was not added because a group by
that name already exists on the file server.  Each
group on a file server must have a unique name.

                                      Page 1 of 1:
8┌             READ LOGIN SCRIPT FOR USER HELP

Because you have supervisor privileges, you can read the login script of users other than the currently
selected user.  

To access another user's login script, use the
BACKSPACE key to delete the current user's name then
either type the name of the user whose login script you
wish to view, or press the INSERT key to list the
available users and select one from the list.

                                          Page 1 of 1;ñLJÿ                         USER LOGIN SCRIPT HELP

The user login script specifies the actions that will occur when the
current user logs in.  The commands in the user login script are executed
after the commands in the system login script.  

A default login script is run for users who do not have a login script created specifically for their usernames.  WHEN YOU SAVE A LOGIN SCRIPT IN SYSCON, IT OVERRIDES YOUR DEFAULT SCRIPT. DO NOT SAVE AN INCORRECT LOGIN SCRIPT IN SYSCON, OR YOUR STATION WILL NOT HAVE SEARCH DRIVES MAPPED CORRECTLY WHEN YOU LOG IN TO THE SYSTEM.  If you delete the entire login script and save it (spaces and carriage returns must all be deleted also), the default login script will be used again.

For a detailed explanation of how to create and modify your own login script, see Appendix A of the Menu Utilities manual. 

                                                            Page 1 of 6êªïá@>5                     USER LOGIN SCRIPT HELP

You can use the following keys to edit the user login
script.  Press the ESCAPE key when you are finished. (For a
description of what physical key to use on your particular
machine and an explanation of what the key does, press the
HELP key a second time.)

     PAGEUP, PAGEDOWN, SPECIAL UP, SPECIAL DOWN, SPECIAL   
     RIGHT, SPECIAL LEFT, UP, DOWN, RIGHT, LEFT, FIELD RIGHT 
     (WORD RIGHT), FIELD LEFT (WORD LEFT), DELETE, BACKSPACE,
     and CANCEL. 

                                                Page 2 of 6²º;ñ
75]             USER LOGIN SCRIPT HELP

To delete a block of text, press the MARK key and use the UP- and DOWN-arrow keys to highlight the text and press the DELETE key.

To move a block of text, delete it as explained above, position the cursor where you wish to insert the text and press the INSERT key.

                                  Page 3 of 6é¬êª	=;m                  LOGIN SCRIPT COMMANDS

Each login script command must be written on its own
line. Blank lines will be ignored by LOGIN.
  
The following commands may be used in a login script:

        MAP             WRITE           EXIT
        DRIVE           IF... THEN      BREAK
        DOS BREAK       # (EXEC)        REMARK
        COMSPEC=        INCLUDE         DISPLAY
        FDISPLAY        PAUSE           MACHINE NAME=
        DOS SET

See Appendix A of the Menu Utilities manual for an
explanation of how to execute the above commands.         
 
                                             Page 4 of 6æ¡²ºIG≈              EXPLANATION OF LOGIN SCRIPT IDENTIFIERS

Identifiers are predefined symbols recognized by LOGIN.  They
represent textual information that is variable.  For example, the
identifier DAY_OF_WEEK represents the literal string "Monday,"
"Tuesday," or whatever the current day is. 

Identifiers may be displayed (see WRITE command) or may be used
in comparisons (see IF...THEN command).

Identifiers preceded by a percent (%) sign will be replaced by
their corresponding text value.  They may appear anywhere in the login
script, like command-line parameters.  Notice that identifiers MUST be
in ALL CAPITALS. 

See the following screen for a list of identifiers.
                  
                                                         Page 5 of 6é¬LJS                        LOGIN SCRIPT IDENTIFIERS

Identifier    Text Value            Identifier     Text Value
HOUR          1 to 12               LOGIN_NAME     User's login name
HOUR24        00 to 23              FULL_NAME      User's full name
MINUTE        00 to 59              STATION        Station number
SECOND        00 TO 59              GREETING_TIME  Morning, Afternoon,
                                                   or Evening
AM_PM         am or pm              NEW_MAIL       Yes or No
MONTH         01 to 12              OS             MSDOS
MONTH_NAME    June, May, etc.       OS_VERSION     V2.11 or V3.00
DAY           01 TO 31              MACHINE        IBM PC,Victor9000,etc.
YEAR          1983, 2016, etc.      SHELL_TYPE     Shell type number
SHORT_YEAR    83, 16, etc.          P_STATION      Physical station  
                                                   number
DAY_OF_WEEK   Monday, Tuesday,etc.  SMACHINE       Short machine name
NDAY_OF_WEEK  1 to 7 (1=Monday)     MEMBER OF      No text value
                                                          Page 6 of 6
0.               LOGIN SCRIPT HELP

This menu lists the file server users. 
Highlight the name of the user whose login
script you want to access and press the
SELECT key.  

If you do not want to select a user, press
the ESCAPE key.

                                  Page 1 of 1
;9φ              READ LOGIN SCRIPT FOR USER HELP

Because you have supervisor privileges, you can
assign the highlighted user's login script to another 
user.  

To do so, use the BACKSPACE key to delete the
highlighted user's name from the "Read Login Script for
User" entry box.  To assign the login script to
another user, either type that user's name or press the
INSERT key to list the file server users and select one
from the list.

                                             Page 1 of 1à╖	><?                 SYSTEM LOGIN SCRIPT HELP

The system login script specifies actions that will
occur for all users when they log in.  The commands in the
system login script are executed before the commands in the
individual user's login script.

A default login script is run for users who do not
have a login script created specifically for their
usernames.

For a detailed explanation of how to create and modify
your own login script, see Appendix A of the Menu Utilities
manual.
                                 
                                              Page 1 of 6╚╣.╡HF+                      SYSTEM LOGIN SCRIPT HELP

You can use the following keys to edit the system login script.  Press the ESCAPE key when you are finished. (For a description 
of the physical key to use on your particular machine and an 
explanation of the key's function, press the HELP key a second time.)

PAGEUP, PAGEDOWN, SPECIAL UP, SPECIAL DOWN, SPECIAL RIGHT, SPECIAL
LEFT, UP, DOWN, RIGHT, LEFT, FIELD RIGHT (WORD RIGHT), FIELD LEFT
(WORD LEFT), DELETE, BACKSPACE, and CANCEL.

                                                        Page 2 of 6N╗à╖
75n               SYSTEM LOGIN SCRIPT HELP

To delete a block of text, press the MARK key and use the UP-and DOWN-ARROW keys to highlight the text; then press the DELETE key.

To move a block of text, delete it as explained above and position the cursor where you wish to
insert the text; then press the INSERT key.

                                        Page 3 of 6 ├╜╚╣
;9]                   LOGIN SCRIPT COMMANDS

Each login script command must be written on its own
line. Blank lines will be ignored by LOGIN.

The following commands may be used in a login script:

        MAP            WRITE           EXIT
        DRIVE          IF...THEN       BREAK
        DOS BREAK      # (EXEC)        REMARK
        COMSPEC=       INCLUDE         DISPLAY
        FDISPLAY       PAUSE           MACHINE NAME=
        DOS SET

See Appendix A of the Menu Utilities manual for an
explanation of how to execute the above commands.

                                             Page 4 of 6┴N╗DB&              EXPLANATION OF LOGIN SCRIPT IDENTIFIERS

Identifiers are predefined symbols recognized by LOGIN.  They
represent textual information that is variable.  For example, the
identifier DAY_OF_WEEK represents the literal string "Monday,"
"Tuesday," or whatever the current day is.

Identifiers may be displayed (see WRITE command) or may be
used in comparisons (see IF...THEN command).

The MEMBER OF identifier may only be used in comparisons.  It
has no test value.  (IF (NOT) MEMBER OF GroupName THEN ....)

Identifiers preceded by a percent (%) sign will be replaced by
their corresponding text value.  They may appear anywhere in the
login script, like command-line parameters.  Notice that
identifiers MUST be in ALL CAPITALS.
                                                      Page 5 of 6├╜LJS                        LOGIN SCRIPT IDENTIFIERS

Identifier    Text Value            Identifier     Text Value
HOUR          1 to 12               LOGIN_NAME     User's login name
HOUR24        00 to 23              FULL_NAME      User's full name
MINUTE        00 to 59              STATION        Station number
SECOND        00 TO 59              GREETING_TIME  Morning, Afternoon,
                                                   or Evening
AM_PM         am or pm              NEW_MAIL       Yes or No
MONTH         01 to 12              OS             MSDOS
MONTH_NAME    June, May, etc.       OS_VERSION     V2.11 or V3.00
DAY           01 TO 31              MACHINE        IBM PC,Victor9000,etc.
YEAR          1983, 2016, etc.      SHELL_TYPE     Shell type number
SHORT_YEAR    83, 16, etc.          P_STATION      Physical station  
                                                   number
DAY_OF_WEEK   Monday, Tuesday,etc.  SMACHINE       Short machine name
NDAY_OF_WEEK  1 to 7 (1=Monday)     MEMBER OF      No text value
                                                          Page 6 of 6		0.╒             SUPERVISOR OPTIONS HELP

Only users with supervisor rights can use
this option.  You do not have supervisor
rights on the currently selected file server.

                                  Page 1 of 1?=,                 GROUPS BELONGED TO HELP

This menu lists the groups to which the selected user
belongs.  Because you are a supervisor, you may modify the
user's group membership using the following keys:

     INSERT
          Add the user to more groups.

     DELETE
          Delete the user from the currently highlighted 
          group.  To delete the user from several groups 
          simultaneously, highlight the desired groups with 
          the MARK key; then press the DELETE key.

                                              Page 1 of 1╩2
0\     SECURITY EQUIVALENCES HELP (supervisor)

This menu lists the users and groups that the highlighted user is security equivalent to.
(The selected user has all the rights of the
users and groups to which he is security equivalent, in addition to the rights
explicitly granted him or her as a user.)

                                  Page 1 of 2¥╚GEv                SECURITY EQUIVALENCES HELP (SUPERVISOR)

Because you have supervisor privileges, you can modify any
user's security equivalences by using the following keys:

     INSERT
          Make the user security equivalent to additional 
          users and groups.

     DELETE
          Delete the user's security equivalence to highlighted 
          users and groups.  To remove several security 
          equivalences simultaneously, use the MARK key to 
          highlight the desired user(s) and group(s); then press 
          the DELETE key.

                                                         page 2 of 2?=!                 GROUP MEMBERS HELP

This menu lists the users that belong to the selected group.  
Because you have supervisor privileges on the current file server, you can do the following:

     INSERT    Add additional users to the selected group.

     DELETE    Delete the highlighted user(s) from the      
               group.  

               To delete several users simultaneously,      
               highlight them with the MARK key and press 
               the DELETE key.

                                          Page 1 of 1^╨
20n       TRUSTEE DIRECTORY ASSIGNMENTS HELP

This menu lists the directories in which
the highlighted user or group's trustee
rights have been explicitly granted or revoked.
(Trustee rights extend to each subdirectory of
the directory in which they are declared,
unless they are specifically changed in the
subdirectory.)

                                  Page 1 of 2╪╬NLc                     TRUSTEE DIRECTORY ASSIGNMENTS HELP

Because you have supervisor privileges, you can modify trustee
assignments by using the following keys:

  INSERT
      Explicitly declare the user or group's trustee rights in a directory.

  DELETE 
      Remove the highlighted trustee rights declaration. To remove several        declarations simultaneously, highlight them with the MARK key press         the DELETE key.

  SELECT
      Change the rights explicitly granted or revoked in the highlighted          directory.

                                                                Page 2 of 2	
1/≤          REVOKE TRUSTEE RIGHTS HELP

If you want all of the marked trustee
rights to be revoked in this directory for the
selected user, answer YES.  Otherwise,
answer NO or press the ESCAPE key.

                                  Page 1 of 1@>∩                 CREATE NEW DIRECTORY HELP

The directory you have specified does not exist.  If you
have misspelled the directory name, answer NO or press
the ESCAPE key, and then correct the spelling.  If you want
to give the selected user trustee rights to a directory that
did not previously exist, answer YES.

If you answer YES, the directory will be created and the
selected user will be given trustee rights in that directory.

                                                Page 1 of 1e╪	>
<b               DEFAULT TIME RESTRICTIONS HELP

This window allows you to specify the default time
restrictions that will be used when new user accounts are
created.  The default time restrictions specify what times
of the day a user is allowed to be logged in to the file
server.  The week is divided into half-hour time blocks. 
If the user is allowed to be logged in during the half-hour
block, the block should be marked with an astrick (*).  If
the user is not allowed to be logged in, the half-hour
block should be marked with a blank space ( ).

                                               Page 1 of 2δ╒NL¬                      DEFAULT TIME RESTRICTIONS HELP

The following keys can be used to change whether a user can be logged in.

     INSERT key or the astrick (*) key
          Specify that the user is allowed to log in.

     DELETE key or the space ( ) key
          Specify that the user is not allowed to log in.

     SELECT key
          Reverses the current setting(s).

A large block of time can be changed by positioning the cursor at one
corner of the time block, pressing the MARK key, and then moving the cursor
to the other corner of the time block before pressing one of the keys
listed above.
                                                              Page 2 of 2B
@                    VIEW ERROR LOG HELP

This file shows all the errors that have been logged
since the last time the error log file was cleared.  Each
time an error occurs while the file server is running, the
error is shown on the system console.  In addition, the error
is logged in the error log file.

You can use the following keys to examine the errors
recorded in the error log file:  UP-arrow, DOWN-arrow, PAGEUP, 
PAGEDOWN, SPECIAL UP, and SPECIAL DOWN.

                                               Page 1 of 1	
53         WORKGROUP MANAGER CANDIDATES LIST

This is a list of all workgroup managers.  Press 
the SELECT key to add one of the users as a 
workgroup manager, or use the MARK and SELECT keys
to add several users as workgroup managers.

                                       Page 1 of 1	>	<h                DELETE WORKGROUP MANAGERS HELP

If you want to revoke the highlighted user or group's
rights to create new user accounts, groups, and queues,
highlight YES and press the SELECT key.  If you do not want
to revoke their rights, highlight NO and press the SELECT 
key, or the ESCAPE key.

                                               Page 1 of 1	>	<h                DELETE WORKGROUP MANAGERS HELP

If you want to revoke the highlighted user or group's
rights to create new user accounts, groups, and queues,
highlight YES and press the SELECT key.  If you do not want
to revoke their rights, highlight NO and press the SELECT 
key, or the ESCAPE key.

                                               Page 1 of 1@>∞                      MANAGERS HELP

This is a list of all users and groups that are workgroup
managers of the selected user or group.  Workgroup managers 
have the necessary "supervisor" rights to modify and/or delete the selected user or group's account.

If you are the network supervisor, you can change the list
of workgroup managers.  Use the DELETE key to remove users 
from the list, or the INSERT key to add users to the list.

                                            Page 1 of 1
<:²              INSUFFICIENT RIGHTS HELP

Although you have supervisor privileges over some users and groups because you are a workgroup manager, you do not have supervisor privileges over all users and groups.  You have just attempted to add or delete a user or group over which you are not a workgroup manager.  If you need to have workgroup manager rights over this user or group, ask the system supervisor to grant you the necessary workgroup manager rights.

                                    Page 1 of 1HF∩                    MANAGED USERS AND GROUPS HELP

This list shows users and groups that are managed by the selected
user or group.  This means that the selected user or group has
"supervisor" rights over the users and groups shown in this list. 
These supervisor rights include modifying the user's name, password,
account restrictions, account balance, groups, security equivalences,
and login script, as well as deleting the user or group.

If you have supervisor rights over the selected user or group, 
you can add to or delete from this list by using the INSERT or DELETE
keys.  You can delete several users by using the MARK key to mark
each user and pressing the DELETE key.

                                                        Page 1 of 1	
0.≥       REVOKE RIGHT TO MANAGE USER HELP

If you no longer want the selected user or
group to manage the highlighted users and/or
groups, answer YES.  Otherwise, answer NO or
press the ESCAPE key.

                                  Page 1 of 1
64          GRANT RIGHT TO MANAGE USERS HELP

This list shows users and groups that are not
managed by the selected user or group.  To grant
the right to manage a user or group, highlight 
the user or group and press the SELECT key.  If 
you want to grant the right to manage several 
users or groups, user the MARK key to mark each 
user or groups name; press the SELECT key.

If you do not want to grant the right to manage any
of these users or groups; press the ESCAPE key.

                                      Page 1 of 186█            NO OTHER ACCOUNTING SERVERS HELP

In order for a server to be authorized to charge
for its services, it must have an account on the file
server that it logs in to.  SYSCON knows about server
accounts for Job Servers, Gateways, Print Servers,
Archive Servers, SNA Gateways, and Remote Bridges. 
There are no accounts for any of these servers that
have not been given authorization to charge for their
services.

                                         Page 1 of 1ECK               MORE THAN 20 CHARGE CHANGES HELP

The method that the file server uses to store what amounts
are being charged during what time of the day allows a maximum
of 20 times when the charge rate changes.  One entry can change
the rate to a new value for one or more days.  For instance, one
entry can change the charge for connection time to 1/30 at 8:00am
on Monday, Wednesday, and Friday.  It takes another entry to
change the rate to 1/50 at 8:00am on Tuesday.  Each time of the
day that a rate change occurs uses at least one entry, and it will
use more than one entry if there is a change for more than one
day and the charge rate is not the same.

Consolidate the rate changes you have made so that it does
not take more than 20 entries to store the rate changes.

                                                    Page 1 of 1LJ«                  MORE THAN 20 DISK CHARGE ENTRIES HELP

The method that the file server uses to store when disk storage
space should be charged for and the rate that should be used allows a
maximum of 20 entries when disk storage space can be charged for.  One
entry can charge a specific rate at a certain time on one or more days. 
For instance, one entry can charge for 1/50 per block-day of disk storage
space at 2:00am on Monday, Wednesday, and Friday.  It takes another entry
to change the rate to 1/50 at 2:00am on Tuesday.  Each time of the day
that a change occurs uses at least one entry, and it will use more than
one entry if there is a different charge rate for the same time period on
other days of the week.

Consolidate the times and rates that are being charged for disk
storage so that it does not take more than 20 entries to store the charge
times.

                                                            Page 1 of 1		0.╛              ERROR LOG IS EMPTY

No errors have been recorded in the file
server error log file since the last time the
error log was cleared.

                                  Page 1 of 197≤              LOGOUT FROM SERVER HELP

You pressed the DELETE key which allows you to
log out from the marked file servers.  However, a
local drive was marked, and it is not possible to
log out from local drives.

If you want to log out from a file server,
highlight that file server's name before pressing
the MODIFY key.  It is possible to log out of multiple
file servers by marking each of them with the MARK
key before pressing the DELETE key.

                                      Page 1 of 14	2N    TRUSTEE RIGHTS DIRECTORY SPECIFICATION HELP

Only directories on the file server where the
user account exists can be used.  Specify the
directory path beginning with the volume name.  
If you do not remember the path, press the INSERT
key to view a list of existing directories.

                                      Page 1 of 1

64¼    TRUSTEE RIGHTS DIRECTORY SPECIFICATION HELP

Drive letters cannot be used when specifying
the directories where a user has trustee rights. 
Only directories on the file server where the user
account exists can be used.  Specify the directory
path beginning with the volume name.  If you do not
remember the path, press the INSERT key to view a
list of existing directories.

                                      Page 1 of 1		1/╗             INVALID DRIVE HELP

The drive you specified is not currently
valid.  Press the INSERT key to interactively 
select a directory.

                                  Page 1 of 1
20₧              Create Directory Error

The name of the directory you are trying to create is in use by a file.

                                    page 1 of 1	
0.π           USER DOES NOT EXIST HELP

There is no user account with the
specified name.  If you do not remember the
user's name, press the INSERT key to get a
list of all usernames.

                                  Page 1 of 11	/*          INVALID INTEGER VALUE HELP

The number that you entered is not in the
allowed range of numbers.  Enter a number that
is in the specified range, or if you do not
want to change this field, press the CANCEL
key to restore the original setting.

                                  Page 1 of 1KIy                       STATION RESTRICTIONS HELP

This list shows network addresses where the selected user is allowed
to log in.  If the list is empty, the user can log in from any
workstation.  If the list is not empty, the user can only log in from
workstations whose address is included in the list.  Addresses are shown
as a network number and a node number; it is also possible to specify
that the user can log in from any node on a specified network.  You can
change the allowed login addresses using the following keys:

     INSERT    Add an address to the list of allowed login addresses.

     DELETE    Remove an address from the list of allowed login 
            addresses.  You can remove several addresses by marking 
            each one with the MARK key before pressing the DELETE
            key.

                                                            Page 1 of 1KI)                        ACCOUNTING SERVERS HELP

This list shows all servers that are authorized to charge for their 
services.  If a server does not appear in this list, it will be unable 
to charge for services it performs (although an audit note indicating 
that it attempted to charge will still be placed in the audit file).  
The file server must appear in this list if it is to charge for any 
file services.  You can change this list by using the following options:

INSERT    Authorize another server to charge for its services

DELETE    Revoke a servers rights to charge for its services.  You can
          also revoke several servers rights at once my marking each
          server with the MARK key before pressing DELETE.

                                                            Page 1 of 1A
?╓                    ACCOUNTING SERVERS HELP

This list shows all servers that are authorized to charge 
for their services.  If a server does not appear in this
list, it will be unable to charge for services it performs
(although an audit note indicating that it attempted to charge
will still be placed in the audit file).  The file server must
appear in this list if it is to charge for any file services.

                                                  Page 1 of 1A?U               SERVERS NOT AUTHORIZED TO CHARGE

This list shows all servers of the selected type that are
not currently authorized to charge for their services.  If the
list is empty, there are no servers of this type that are not
authorized to charge.

Select the server that you want to authorize to charge
and press the SELECT key.  You can authorize several servers
at the same time by marking each server with the MARK key
before pressing the SELECT key.

If you do not want to authorize a server to charge, press
the ESCAPE key.

                                                 Page 1 of 1KI5                   FILE SERVER CONSOLE OPERATORS HELP

This list shows all the users and groups that have been authorized to
run the file server console from any workstation where they are logged
in.  In addition, any users that are security equivalent to a user or
group in this list will also be able to run the file server console from
any workstation.  You have the following options:

     INSERT    Authorize new users or groups to run the file server 
            console from their workstation.

     DELETE    Revoke a user or group's right to run the file server 
            console.  You can revoke several users' or groups' rights 
            by marking each user or group with the MARK key before 
            pressing the DELETE key.

                                                           Page 1 of 1	>	<d                  DELETE CONSOLE OPERATOR HELP

If you want to revoke the highlighted user or group's
rights to run the virtual console from a workstation,
highlight YES and press the SELECT key.  If you do not want
to revoke their rights, highlight NO and press the
SELECT key or the ESCAPE key.

                                               Page 1 of 1J
H|                 ADD FILE SERVER CONSOLE OPERATOR HELP

This list shows all users and groups that have not been explicitly
granted the right to run the file server console from any workstation. 
To give a user or group the right to run the file server console,
highlight the user or group's name and press the SELECT key.  To give
several users or groups the right to run the file server console, mark
each name using the MARK key and then press the SELECT key.

If you do not want to give anyone else the right to run the file
server console, press the ESCAPE key.

                                                          Page 1 of 1
@>è           DELETE MARKED STATION RESTRICTIONS HELP

If you want to remove all the highlighted station restrictions from the list of addresses where this user can
log in from then answer YES, otherwise answer NO or press the
ESCAPE key.

Note that deleting all addresses from the list will allow
the user to log in from any address.

                                                  Page 1 of 17	5,          REMOVE ACCOUNTING SERVER HELP

If you want the marked servers' right to charge users for their services to be revoked, answer YES.  If you want the servers to continue to be authorized to charge for services, answer NO or press the ESCAPE key.

                                  Page 1 of 1F
DB                     CONNECT CHARGE RATES HELP

This screen shows how much the file server will charge for
each minute of connect time (time that a user is logged in to the
file server).  The charge is shown for each half-hour during the
week.  The file server may charge during some time periods and
not charge during others.  In addition, the amount that is charged 
during different time periods of the week can be varied.

Each half-hour is marked by the charge rate that applies
during that half-hour period.

                                                    Page 1 of 1ZB@╝                   CONNECT CHARGE RATES HELP

This screen shows how much the file server will charge for each minute of connect time (time that a user is logged in to the file server).  The charge is shown for each half-hour during the week.  The file server may charge during some time periods and not charge during others.  In addition, the amount that is charged during different time periods of the week can be varied.

Each half-hour is marked by the charge rate that applies during that half hour period.  You can change the charge during a single half-hour by positioning the cursor on the half-hour and pressing the SELECT key. 
                                                    Page 1 of 2åA?╪                   CONNECT CHARGE RATES HELP
     
You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and then pressing the SELECT key.

To not charge during a time period, change the charge rate during that time period to "No Charge" (charge multiplier of 0).

                                                   Page 2 of 2
IG                     DISK STORAGE CHARGE RATES HELP

This screen shows how much the file server will charge for each
block (a block is 4K or 4096 bytes) that is stored on a disk for one
day.  The time when disk storage will be charged for is shown, as well
as the amount that will be charged per block-day.  Disk storage will
be charged for at the specified half-hour and will charge for all
disk storage since the last time that disk storage was charged for.


                                                        Page 1 of 1LJ╨                      DISK STORAGE CHARGE RATES HELP

This screen shows how much the file server will charge for each
block (a block is 4K or 4096 bytes) that is stored on a disk for one day.
The time when disk storage will be charged for is shown, as well as the
amount that will be charged per block-day.  Disk storage will be charged
for at the specified half-hour and will charge for all disk storage since
the last time that disk storage was charged for.

You can specify a charge time for a single half-hour by positioning
the cursor on the half-hour and pressing the SELECT key.  You can
specify a charge time of a larger block by positioning the cursor at the
beginning or end of the block, pressing the MARK key, moving the cursor
to the other end of the block, and then pressing the SELECT key.

To not charge during a time period, change the charge rate during
that time period to "No Charge."
                                                            Page 1 of 1D
B                 SERVICE REQUESTS CHARGE RATES HELP

This screen shows how much the file server will charge for
each request that is made by a workstation.  The charge is shown
for each half-hour during the week.  The file server may charge
during some time periods and not charge during others.  The 
amount that is charged during different time periods of the week 
can be varied.

Each half-hour is marked by the charge rate that applies
during that half-hour period.

                                                     Page 1 of 11&JHÄ                  SERVICE REQUESTS CHARGE RATES HELP

This screen shows how much the file server will charge for each request that is made by a workstation.  The charge is shown for each half-hour during the week.  The file server may charge during some time periods and not charge during others.  The amount that is charged during different time periods can be varied.

Each half-hour is marked by the charge rate that applies during
that half-hour period.  You can change the charge during a single
half-hour by positioning the cursor on the half-hour and pressing the 
SELECT key.  

                                                        Page 1 of 2ï#
IG▀                  SERVICE REQUESTS CHARGE RATES HELP

You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and then pressing the SELECT key.

To not charge during a time period, change the charge rate during
that time period to "No Charge" (charge multiplier of 0).

                                                       Page 2 of 2B
@8                     DISK READ CHARGE RATES HELP

This screen shows how much the file server will charge for
each block (a block is 4K or 4096 bytes) that is read from the
disk.  The charge is shown for each half-hour during the week. 
The file server may charge during some time periods and not
charge during other time periods.  The amount that is charged 
during different time periods of the week can be varied.

Each half-hour is marked by the charge rate that applies
during that half-hour period.

                                                    Page 1 of 1MK²                     DISK READ CHARGE RATES HELP

This screen shows how much the file server will charge for each block (a block is 4K or 4096 bytes) that is read from the disk.  The charge is shown for each half hour during the week.  The file server may charge during some time periods and not charge during others.  The amount that is charged during different time periods can be varied. 

Each half-hour is marked by the charge rate that applies during that 
half-hour period.  You can change the charge during a single half-hour by positioning the cursor on the half-hour and pressing the SELECT key.  You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and pressing SELECT.

To not charge during a time period change, the charge rate during that time period to "No Charge" (charge multiplier of 0).
                                                          Page 1 of 1B
@,                   DISK WRITE CHARGE RATES HELP

This screen shows how much the file server will charge for
each block (a block is 4K or 4096 bytes) that is written to the
disk.  The charge is shown for each half-hour during the week. 
The file server may charge during some time periods and not
charge during others.  The amount that is charged during  
different time periods of the week can be varied.

Each half-hour is marked by the charge rate that applies
during that half-hour period.

                                                   Page 1 of 1¢3JH▓                     DISK WRITE CHARGE RATES HELP

This screen shows how much the file server will charge for each
block (a block is 4K or 4096 bytes) that is written to the disk.  The
charge is shown for each half-hour during the week.  The file server
may charge during some time periods and not charge during others.
The amount that is charged during different time periods of the week 
can be varied.

Each half-hour is marked by the charge rate that applies during
that half-hour period.  You can change the charge during a single half-
hour by positioning the cursor on the half-hour and pressing the
SELECT key.  
                                                          Page 1 of 2╤0
IG┌                     DISK WRITE CHARGE RATES HELP

You can change the charge during a larger time block by positioning the cursor at the beginning or end of the time block, pressing the MARK key, moving the cursor to the other end of the time block, and pressing the SELECT key.

To not charge during a time period, change the charge rate during
that time period to "No Charge" (charge multiplier of 0).

                                                          Page 2 of 2û7?
=±                 ALLOWED LOGIN TIMES HELP

This window allows you to specify the times during the
week when this user is allowed to be logged in to the file
server.  The week is divided into half-hour time blocks.

If the user is allowed to be logged in during the half-
hour block, the block should be marked with an asterisk (*).

If the user is not allowed to be logged in, the half-
hour block should be marked with a blank space ( ).

                                              Page 1 of 2ì5NLª                         ALLOWED LOGIN TIMES HELP

The following keys can be used to change whether a user can be logged in.

     INSERT key or the asterisk (*) key
          Specify that the user is allowed to log in.

     DELETE key or blank space ( ) 
          Specify that the user is not allowed to log in.

     SELECT key
          Reverse the current setting(s).

A large block of time can be changed by positioning the cursor at one
corner of the time block, pressing the MARK key, and then moving the cursor
to the other corner of the time block before pressing one of the keys
listed above.
                                                              Page 2 of 2	
><╙                 ALLOWED LOGIN TIMES HELP

This window shows the times during the week when this
user is allowed to be logged into the file server.  The
week is divided up into half-hour time blocks.  If the user
is allowed to be logged in during the half-hour block, the
block is marked with an asterisk (*).  If the user is not
allowed to be logged in, the half-hour block is marked
with a blank space ( ).

                                              Page 1 of 1
;
9▌             DEFAULT ACCOUNT EXPIRATION HELP

Set this field to YES if you want new accounts to
be created as temporary accounts that will automatically
expire at a specified future date.  Set this field to NO
if new accounts should be created as permanent accounts.
After entering the desired option, press the SELECT or
ESCAPE key.

If you do not want to change this field, press the
CANCEL key and then the ESCAPE key.

                                           Page 1 of 14	2)                FIELD EXIT HELP

You have changed the contents of this field.  If you do not want to save the changes you made, select NO.  If you want to save the changes, select YES.  If you want to continue editing the field, press the ESCAPE key.

                                  Page 1 of 175µ          DEFAULT ACCOUNT EXPIRATION DATE

Enter the date that should be the default
account expiration date for any new user accounts
that are created.  The account will be automatically
disabled by the file server after the expiration
date is past.

After you have entered the date, press the
SELECT or ESCAPE key.

If you have changed the date but do not want to
save the changed date, press the CANCEL key and then
the ESCAPE key.

                                       Page 1 of 1
534          DEFAULT LIMIT CONNECTIONS HELP

If you want new user accounts to be created
with the limit connections restriction set to yes,
enter YES.  If you do not want the connections
to be limited, enter NO.  When you have finished,
press the SELECT or ESCAPE key.

If you do not want to change this field, press
the CANCEL key and then the ESCAPE key.

If the limit connections option is set to YES,
you can enter a value for the maximum number of 
workstations that a user can be logged in to at
the same time.

                                      Page 1 of 186ⁿ           DEFAULT MAXIMUM CONNECTIONS HELP

Enter the number that you want to be the default
maximum number of connections for new user accounts
that are created.  When you are finished, press the
SELECT key or the ESCAPE key.

If you do not want to save any changes you have made 
then, press the CANCEL key and then the ESCAPE key.

The maximum connections limit is the maximum
number of workstations that a user can be logged in
to at the same time.

                                          Page 1 of 1ÿG	=;¡               DEFAULT "Require Password" HELP

If you want the default for new user accounts that are
created to require the account to have a password,
enter YES, otherwise enter NO.  When you have finished, 
press the SELECT key or ESCAPE key.

If you have made changes to this setting that you do
not want saved, press the CANCEL key before pressing the
ESCAPE key.

                                               Page 1 of 2╙E
;9─               DEFAULT "Require Password" HELP

If a password is required and the user does not have
a password of the minimum required length, the user
will be told his password has expired when he logs in.

In addition, if the "Limit Grace Logins" option is set
to YES, the user will be locked out of his account if
he has not assigned a password to his account within the
grace login period.

                                             Page 2 of 2K42u         DEFAULT MINIMUM PASSWORD LENGTH

Enter the default minimum password length
that should be used when new user accounts are
created.

After you have entered the length, press the
SELECT or ESCAPE keys.

If you have made changes to the length that
you do not want to save, press the CANCEL key and
then the ESCAPE key.

                                    Page 1 of 2tI
;9┬             DEFAULT MINIMUM PASSWORD LENGTH

If a password is required and the user does not have
a password of the minimum required length, the user
will be told his password has expired when he logs in.

In addition, if the "Limit Grace Logins" option is set
to YES, the user will be locked out of his account if
he has not assigned a password to his account within the
grace login period.

                                             Page 2 of 2	><2           DEFAULT FORCE PASSWORD CHANGES HELP

If you want the default for new users that are
created to be that they must change their passwords at
regular intervals, enter YES; otherwise, enter NO. 
When you have entered your selection, press the SELECT key
or the ESCAPE key.

If you have made changes to this entry that you do
not want to save, press the CANCEL key and then the
ESCAPE key.

If this option is set to YES; you can enter the
number of days after which the user's password will expire.

                                             Page 1 of 1¿P20k     DEFAULT PASSWORD EXPIRATION INTERVAL

Enter the default number of days that a
user can use the same password.  After you have
entered the number of days, press the SELECT
key or the ESCAPE key.

If you have changed this setting and do
not want to save your changes, press the CANCEL
key and then the ESCAPE key.

                                  Page 1 of 2%O
20¢      DEFAULT PASSWORD EXPIRATION INTERVAL

When a user has used his password for the
specified number of days, he will be told that
the password is expired and should be changed. 
In addition, if the "Limit Grace Logins" option
is set to YES, the user will not be allowed to
log in again if the password is not changed
within the specified number of grace logins.

                                  Page 2 of 2úT970              DEFAULT LIMIT GRACE LOGINS HELP

If you want the default for new user accounts that 
are created to limit the number of times that they 
can log in with an expired password, set this option 
to YES.  If the user should be able to log in with an 
expired password forever, set this option to NO.  
After you have made your selection, press the SELECT 
key or the ESCAPE key.

If you have changed this setting and do not want to
save your changes, press the CANCEL key and then the
ESCAPE key.

                                          Page 1 of 2[R
@>φ               DEFAULT LIMIT GRACE LOGINS HELP

If this option is set to YES, you can enter the number of times that the user can continue to log in with the expired password.  If the user does not change the password within the specified number of logins, he will not be allowed to log in again until the supervisor grants the user additional grace logins or changes the user's password expiration date to a date that is not past.

                                                 Page 2 of 2.X20n           DEFAULT GRACE LOGINS HELP

Enter the number of grace logins that
should be the default for new user accounts
that are created.  When you are finished, press
the SELECT key or the ESCAPE key.

If you have changed this setting and do
not want to save your changes, press the CANCEL
key and then the ESCAPE key.

                                  Page 1 of 2¿V@>2               DEFAULT GRACE LOGINS HELP

After a user's password has expired, the user will be given the specified number of grace logins using the expired password.  Each time the user logs in, he will be informed that the password is expired and will be asked to change it.  If the password is not changed before the grace logins are used up, the user will not be able to log in again until the SUPERVISOR gives him additional grace logins or sets the password expiration date to a date that is not past.

                                          Page 2 of 2ì\	>
<²             DEFAULT REQUIRE UNIQUE PASSWORDS

If you want the default for new user accounts that are
created to be that they are required to use a new password
each time they change their password, set this option to
YES.  Otherwise, set this option to NO.  When you have made
your selection, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to
save the change, press the CANCEL key and then the ESCAPE
key.

                                               Page 1 of 2xZCA'                DEFAULT REQUIRE UNIQUE PASSWORDS

If a user is required to have unique passwords, the file
server will remember the user's previous passwords.  The user
will not be allowed to change his password to a password that he
used previously.

A user can change the password several times on the same day
without the file server remembering the new passwords as
passwords that the user has previously used.  This keeps
passwords that the user has not really used from being locked
out as previous passwords by the file server.  It also keeps
users who do not want to change their passwords from cycling
through a large number of passwords until the file server
forgets the password they were just using and allows them to use
it again.

                                                   Page 2 of 2
64Ω               LIMIT DISK SPACE HELP

If you want the default for new user accounts that are created to limit the amount of disk space they can use, enter YES.  If you do not want the default amount of disk space they can use to be limited, enter NO.  When you have made your entry, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 1CA	                     MAXIMUM DISK SPACE HELP

Enter the maximum disk space that a user should be able to
use on the file server.  Enter the amount of disk space in
kilobytes (1K is 1024 bytes).  Since disk space is allocated in
4K blocks, the amount of space you entered will be rounded up to
a 4K boundary.  Files are allocated in 4K blocks also, so the 
actual disk space that a file is using is usually larger that 
the file size shown by a directory listing size must be rounded 
up to the next 4K boundary).

When you have entered the disk space limit, press the SELECT
key or the ESCAPE key.

If you have changed this limit and do not want to save the
changes, press the CANCEL key and then the ESCAPE key.

                                                    Page 1 of 1hLJ                       DEFAULT RESTRICTIONS HELP

This form lets you select the default restrictions that a new user
will have when his account is first created.  The entries are explained
below:

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, it indicates that the account is only
     a temporary account.  Temporary accounts are disabled automatically 
     at a specified date and cannot be used after that date unless the
     supervisor reenables the account.  If this option is set to NO,
     the account is permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the field "Account has Expiration" date is set to YES, this
     field contains the date the account expires.

                                                            Page 1 of 8ÿj∩dMKa                        DEFAULT RESTRICTIONS HELP

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, it indicates that the user is limited as
     to the number of workstations where he can be logged in at the same
     time.  If this field is set to NO, the user is not limited, and
     can log in from as many stations as the server supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, this
     field specifies how many stations the user can log in from at the
     same time.

                                                             Page 2 of 8ìmhLJ▌                        DEFAULT RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on his account.  If this option is set to NO, the user is
     not required to have a password.  If the user is not required to
     have a password, he can choose whether he wants a password on his 
     account.  Note that a password must be required in order to require 
     the user to change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field contains
     the minimum length of the required password.  This length can be
     between 1 and 20 characters.

                                                            Page 3 of 8ipÿjLJ─                        DEFAULT RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field was set to YES, this field
     indicates if the user is required to change his password at regular
     intervals.  If this field is set to YES, the user's password will
     expire periodically and he will be asked to change the password.  If
     this field is set to NO, the user's password will never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, this
     field contains the number of days the user can use a password before
     the password expires.

                                                            Page 4 of 8gtìmLJµ                        DEFAULT RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates whether the user is forced to change the password,
     or if an expired password is simply a reminder to change to a new
     password.  If this field is set to YES, the user has a limited
     number of chances to change the password.  If the user does not
     change the password within the specified limit, he will no longer be
     able to log in.  If this field is set to NO, the user will not be
     required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field
     indicates the number of chances the user gets to change his password
     when it is expired.  If the user does not change the password within
     the specified number of logins, he will not be allowed to log in.
                                                            Page 5 of 8╘vip
LJU                        DEFAULT RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this field
     indicates whether the user should be forced to use a different
     password each time the password is changed.  If this option is set
     to NO, the user can change the password to any password, even if it
     is a password he has used previously.  If this option is set to YES,
     the user will not be allowed to change the password to a password
     he has used previously.
                                                            Page 6 of 8ΦygtJHⁿ                         DEFAULT RESTRICTIONS HELP

ACCOUNT BALANCE
     If accounting is supported by the selected file server, this
     field will specify the account balance that should be given to 
     a new user when his account is first created.

ALLOW UNLIMITED CREDIT
     If accounting is supported by the selected file server, this
     field indicates whether a new user will be given unlimited credit
     when his account is first created.  If this field is set to YES, 
     the user will never be denied services because of insufficient
     account funds.  If it is set to NO, the user will be denied 
     services if his account balance drops below the low balance limit.

                                                            Page 7 of 8╘v9
7√               DEFAULT RESTRICTIONS HELP

LOW BALANCE LIMIT
     If accounting is supported by the selected file
     server and "Allow Unlimited Credit" is set to NO,
     this field indicates the lowest balance the user 
     can have and still receive services that are
     being charged for.  If the user's account balance
     drops below the low balance limit, the user will
     be denied any additional services that are being
     charged for.

                                         Page 8 of 8\LJI                          ACCOUNT BALANCE HELP

This form shows the user's current account balance and the user's credit limit.  The account balance is the amount of funds that the user currently has.  Each time the user is charged for a service, his account balance is decremented.

The credit limit determines how low the user's account balance can drop
before he will no longer receive services that are being charged for.  If the user is given unlimited credit, he will always be given services and the account balance will only serve as an indicator of how much service the user is receiving.  If the user has limited credit, then when the account balance falls below the specified credit limit, the user will no longer receive services that are being charged for.

                                                           Page 1 of 2√{K	I╨                          ACCOUNT BALANCE HELP

A credit limit of zero means the user cannot receive any further services when his account balance drops below zero.  A negative credit limit means the user's account is allowed to go in the hole until it reaches the credit limit.  A positiive credit limit means the user is required to have specified amount of funds in his account at all times.

                                                         Page 2 of 2
75A    CHANGE MULTIPLE USERS ACCOUNT BALANCE HELP

If you want all the marked users account balance and credit limits to be set to these values, select YES; if you do not want them set to these values select NO.

If you want to edit the values again, press the 
ESCAPE key.

                                      Page 1 of 1B@^                      ACCOUNT BALANCE HELP

Enter the desired account balance amount.  When you are
finished, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save
the changes, press the CANCEL key and then the ESCAPE key.

The account balance is the user's current balance on the
file server.  The account balance will be decremented each time
the user is charged for a service.  The account balance should
be incremented by the supervisor when the user account needs to
be given additional funds.

                                                   Page 1 of 1EC@                    ALLOW UNLIMITED CREDIT HELP

If you want the user to be given unlimited credit on the file
server, set this option to YES; otherwise, set this option to
NO.  When you have made your selection, press the SELECT key or 
the ESCAPE key.

If you have made changes to this setting and do not want to
save the changes, press the CANCEL key and then the ESCAPE key.

If a user account is given unlimited credit, the user will
continue to receive services no matter how low his account balance
falls.  If a user does not have unlimited credit, then specify
the exact amount of credit that the user should be given.  If the
users' account balance drops below the defined credit limit, the
user will no longer receive services for which there is a charge.

                                                      Page 1 of 1µèIGc                         CREDIT LIMIT HELP

Enter the credit limit for the user.  When you are finished,
press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save the
changes, press the CANCEL key and then the ESCAPE key.

The credit limit specifies the lowest balance the user can have
in his account balance and still receive services that are being
charged for.  If the credit limit is set to zero, the user will not 
be able to receive additional services when his account balance drops 
to zero.  

                                                        Page 1 of 2kêI
G≥                         CREDIT LIMIT HELP

If the credit limit is set to a negative amount, the user is
allowed to "charge" additional services after his account balance
falls below zero, until the account balance reaches the credit limit.
If the credit limit is a positive amount, the user will not be able
to use all of his account balance, but will be required to have some
minimum amount of funds in his account at all times.

                                                       Page 2 of 2
64·               DETECT INTRUDERS HELP

Enter YES in this field if you want the file
server to detect when someone is trying to break
in to an account.  If you do not want the file 
server to detect when someone is trying to break 
in to an account, enter NO.  When you have entered 
your selection, press the SELECT key or the ESCAPE 
key.

If you have made changes to this setting that
you do not want saved, press the CANCEL key and
then the ESCAPE key.

                                       Page 1 of 18
6⌐            INCORRECT LOGIN ATTEMPTS HELP

Enter the number of successive incorrect login
attempts at which the file server should detect that
an intruder is trying to break into an account.  When
you are finished, press the SELECT key or the ESCAPE
key.

If you have changed this setting and do not want
to save your changes, press the CANCEL key and then
the ESCAPE key.

                                        Page 1 of 175'        BAD LOGIN COUNT RETENTION TIME HELP

The BAD LOGIN COUNT RETENTION TIME is used to
clear the bad login count if no additional incorrect
attempts have been made to log in to the account for
the specified length of time.

Enter the days, hours, and minutes that bad
login attempts should be remembered.  When you have
entered the number, press the SELECT key or the
ESCAPE key.

If you have made changes to this field and do
not want to save them, press the CANCEL key and
then the ESCAPE key.

                                       Page 1 of 131┬     LOCK ACCOUNT AFTER DETECTION HELP

If you want an account to be locked when an
intruder is detected, set this option to YES.  
If you do not want the account to be locked 
set this option to NO.  After you have entered 
your selection, press the SELECT key or the 
ESCAPE key.

If you have changed this setting and do not 
want to save your changes, press the CANCEL key 
and then the ESCAPE key.

                                    Page 1 of 1kù@>w               INTRUDER DETECTION/LOCKOUT HELP

Intruder detection and lockout allow you to specify
whether attempts to log in to the file server with invalid
passwords will be detected and recorded.  In addition, it
allows you to optionally lock an account that an intruder is
trying to break in to.  Each entry is described below.

DETECT INTRUDERS
     If this option is set to YES, the file server will
     record repeated attempts to log in to an account with an
     invalid password.  If this option is set to NO, the file
     server will not detect intruders.

                                                 Page 1 of 5└¢▄öKI=                    INTRUDER DETECTION/LOCKOUT HELP

INCORRECT LOGIN ATTEMPTS
     This entry is used by the file server to determine when an
     intruder is attempting to break in to an account and when a user
     mistyped his password.  The file server tracks the number of
     incorrect login attempts that occur for each user account.  It
     resets the number of incorrect logins for an account whenever the
     user successfully logs in to the file server or when the "Bad
     Login Count Retention Time" has past since the last bad login.  If
     the number of incorrect logins for a user reaches the number
     entered in the "Incorrect Login Attempts" field, the file server
     will "detect" an intruder.  When an intruder is detected, an entry
     is placed in the audit file and the file server error log file
     indicating the address of the intruder and the account he was
     attempting to log in to.  In addition, the account the intruder was
     attempting to log in to can be locked.
                                                          Page 2 of 5b₧kùKIè                    INTRUDER DETECTION/LOCKOUT HELP

BAD LOGIN COUNT RETENTION TIME
     This field indicates the amount of time, after an incorrect login
     attempt occurred, that must pass before the bad login attempt is
     forgotten by the file server.  Bad login attempts are immediately
     forgotten if the user logs in successfully.  Otherwise, the number
     of bad login counts is remembered until it reaches the limit
     specified in the "Incorrect Login Attempts" field, or the amount of
     time specified in the "Bad Login Count Retention" field has past.

                                                            Page 3 of 5╩ó└¢MKP                  INTRUDER DETECTION/LOCKOUT HELP

LOCK ACCOUNT AFTER DETECTION
     This field allows you to specify if the file server should lock an
     account that an intruder is attempting to log in to.  If this field
     is set to YES, the file server will lock the account when an
     intruder is detected; the file server will also generate a note in 
     the audit file and in the system error log file.  If this field is 
     set to NO, a note indicating that an intruder was detected will 
     be generated, but the account will not be locked.  If an account is
     locked, no one can log in to the account for the length of time  
     specified in the "Length of Account Lockout" field.  This is intended
     to make it impossible to log in by trying to guess a password.  
     Anyone with SUPERVISOR privileges can use SYSCON to unlock the
     account before the specified time has passed.  In addition, the
     SUPERVISOR'S account can be unlocked from the file server console by
     typing ENABLE LOGIN.
                                                            Page 4 of 5b₧	

;9           INTRUDER DETECTION/LOCKOUT HELP

LENGTH OF ACCOUNT LOCKOUT
     If the "Lock Account After Detection" option is set
     to YES, this field specifies the amount of time          that the account should be locked.

                                          Page 5 of 5¬ªIGÜ                      INTRUDER LOCKOUT STATUS HELP

This form shows the intruder lockout status of the selected user's
account.  Each field is described below.

ACCOUNT LOCKED
     This field shows if the account is currently locked because an
     intruder was detected.  If the account is locked, you can unlock
     it by changing this entry to NO.

INCORRECT LOGIN COUNT
     This field shows the current incorrect login count for the
     selected count.  This count is automatically reset to zero each
     time the user logs in successfully or when the ACCOUNT RESET TIME
     is reached.

                                                          Page 1 of 3╙⌐°úIG                      INTRUDER LOCKOUT STATUS HELP

ACCOUNT RESET TIME
     If the account is currently locked, this field shows the time
     when the account will be unlocked.  If the account is unlocked,
     but the "Incorrect Login Count" is non-zero, this field shows the
     time when the incorrect login count will be reset to zero.
     Otherwise, this field is blank.

TIME UNTIL RESET
     If the account is currently locked, this field shows how much
     longer the account will be locked.  If the account is unlocked,  
     but the "Incorrect Login Count" is non-zero, this field shows how
     much longer before the incorrect login count will be reset to
     zero.  Otherwise this field is blank.

                                                         Page 2 of 3¬ªE
C£                     INTRUDER LOCKOUT STATUS HELP

LAST INTRUDER ADDRESS
     If the account is locked, this field shows the address of
     the workstation of the "intruder" that caused that account to
     be locked.  Otherwise, this field shows the address of the
     last workstation that attempted to log in with an incorrect
     password.

                                                     Page 3 of 3	=;3                    ACCOUNT LOCKED HELP

If you want to allow users to log in to this account,
enter NO.  If you want users to be prevented from
logging in to this account then enter YES.  After you have
made your selection press the SELECT key or the ESCAPE
key.

If you have changed this field but do not want to save
the change, press the CANCEL key.

Note that you can unlock an account that has been
locked because of intruder detection, but you cannot lock
an account that is not currently locked.

                                               Page 1 of 1FD┬                   EDIT CHARGE MULTIPLIER HELP

Enter the number that you want to use for the charge rate
multiplier and press the SELECT key.

If you do not want to change the number, press the ESCAPE key.
The charge rate multiplier is used to determine how much
will be charged for usage of a resource as follows:

         AmountUsed * Multiplier / Divisor = ChargeAmount

Normally the multiplier should be much smaller than the
divisor, since the "AmountUsed" is usually larger than the desired
"ChargeAmount."  The amount that should be charged will depend on
your particular setup and the value that you assign to each unit of
money.

                                                      Page 1 of 1IG╝                     EDIT CHARGE DIVISOR HELP

Enter the number that you want to use for the charge rate divisor and press the SELECT key.

If you do not want to change the number, press the ESCAPE key.  The charge rate divisor is used to determine how much will be charged for usage of a resource as follows:

         AmountUsed * Multiplier / Divisor = ChargeAmount

Normally the divisor should be much larger than the multiplier, since the "AmountUsed" is usually larger than the desired "ChargeAmount."  The amount that should be charged will depend on your particular setup and the value that you assign to each unit of money.

                                                       Page 1 of 1d╢FD╠                      ENTER CHARGE RATE HELP

This form allows you to enter a new charge rate.  A charge
rate consists of a multiplier and a divisor that are used to change
the amount of resource being charged for into a charge for the
resources usage as follows:
     
         AmountUsed * Multiplier / Divisor = ChargeAmount

Normally the amount of resource used is much larger than the
amount that should be charged, so the amount entered for the
divisor should be much larger than the amount entered for the
multiplier.  The amount that should be charged will depend on your
particular setup and the value that you assign to each unit of
money.

                                                      Page 1 of 2Ç│	><┬                     ENTER CHARGE RATE HELP

To change the charge rate amount, highlight the number to 
be changed and type in the new number.  To edit the number 
that is already entered, highlight the number to be edited 
and press the SELECT key.

To set the charge amount to "No Charge", enter 0 as the
multiplier.

When you have set the charge rate that you want, press the
ESCAPE key.

                                               Page 2 of 2
53&             ACCOUNT DISABLED HELP

If you do not want this account to be used,
but do not want to delete the account then enter
YES.  If you want the user to be able to use this
account then enter NO.  When you have finished
then press the SELECT key or the ESCAPE key.  Note
that if the account will never be used again you
should delete the account rather than disable it.

If you have made changes to this setting but
do not want to save the changes, press the CANCEL
key and then the ESCAPE key.

                                     Page 1 of 1A?╝                     ACCOUNT EXPIRES HELP

Set this field to YES if this account is a temporary
account that should automatically expire at a specified future
date.  Set this field to NO if this account is a permanent
account.  After entering the desired option, press the SELECT
or ESCAPE key.

If you do not want to change this field, press the CANCEL
key and then the ESCAPE key.

                                                 Page 1 of 1
A?┤                   ACCOUNT EXPIRATION DATE

Enter the date that this account should expire.  This
account will be disabled automatically by the file server
after the expiration date is past.  After you have entered the
date, press the SELECT or ESCAPE key.

If you have changed the date but do not want to save the
changed date, press the CANCEL key and then the ESCAPE key.

                                                 Page 1 of 1@>E                   LIMIT CONNECTIONS HELP

If you want the number of workstations where this user
can be simultaneously logged in to be limited, enter YES.
If you do not want the connections to be limited, enter NO. 
When you have finished press the SELECT or ESCAPE key.

If you do not want to change this field, press the
CANCEL key and then the ESCAPE key.

If the "Limit Connections" option is set to YES, you
can enter a value for the maximum number of workstations that
a user can be logged in to at the same time.

                                                Page 1 of 1:8╠                  MAX CONNECTIONS HELP

Enter the maximum number of simultaneous connections
this user can have.  When you are finished, press the
SELECT key or the ESCAPE key.

If you do not want to save any changes you have made,
then press the CANCEL key and then the ESCAPE key.

The maximum connections limit is the maximum number
of workstations that the user can be logged in to at
the same time.

                                            Page 1 of 1
DBµ              ALLOW USER TO CHANGE PASSWORD HELP

If the user should be able to change his own password, enter YES.  If this account will be used by several people and they should not be able to change the password, enter NO.  When you have entered your selection, press the SELECT key or the ESCAPE key.

If you have made changes to this setting that you do not want to save, press the CANCEL key and then the ESCAPE key.

                                                   Page 1 of 1∞┼
:8y               REQUIRE PASSWORD HELP

If you want to require this user to have a password 
on his account, enter YES.  Otherwise, enter NO.  
When you have finished, press the SELECT or ESCAPE key.

If you have made changes to this setting that you do 
not want saved, press the CANCEL key before pressing 
the ESCAPE key.

                                          Page 1 of 2[─
;9«                  REQUIRE PASSWORD HELP

If a password is required and the user does not have
a password of the minimum required length, he will be 
told his password has expired when he logs in.

If the "Limit Grace Logins" option is set to YES, the 
user will be locked out of his account if he has not 
assigned a password to his account within the grace 
login period.

                                             Page 2 of 2$╔	>	<Z              MINIMUM PASSWORD LENGTH HELP

Enter the minimum required length of the user's password.  
After you have entered the length, press the SELECT or 
ESCAPE keys.  If you have made changes to the length that 
you do not want to save, press the CANCEL key and then the
ESCAPE key.

                                            Page 1 of 2▓╟	><┬               MINIMUM PASSWORD LENGTH HELP

If a password is required and the user does not have a
password of the minimum required length, the user will
be told his password has expired when he logs in.

In addition if the "Limit Grace Logins" option is set to
YES, the user will be locked out of his account if he
has not assigned a password to his account within the grace
login period.

                                              Page 2 of 2 	><■            FORCE PERIODIC PASSWORD CHANGES HELP

If you want this user to change his password at regular
intervals, enter YES; otherwise, enter NO.  When you have
entered your selection, press the SELECT key or the ESCAPE
key.

If you have made changes to this entry that you do not
want to save, press the CANCEL key and then the ESCAPE
key.

If this option is set to YES, you can enter the
number of days after which the user's password will expire.

                                             Page 1 of 1
53Φ        DAYS BETWEEN FORCED CHANGES HELP

Enter the number of days that the user can use the same password.  After you have entered the number of days, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

After the specified number of days, the user will be informed that his password has expired when he logs in to the file server.

                                     Page 1 of 1@>ÿ                DATE PASSWORD EXPIRES HELP

Enter the next date when this user's password should expire.  If you enter a date too far in the future, the date will be changed to the current date plus the number of "Days Between Forced Changes" when this user's restrictions are saved.  When you have entered the password expiration date, press the SELECT key or the ESCAPE key.

If you have changed this date but do not want to save the change, press the CANCEL key and then the ESCAPE key.

Note that this date will be automatically recalculated by the file server each time the user changes the password.

                                              Page 1 of 1╒╙
;9∙                  LIMIT GRACE LOGINS HELP

If you want to limit the number of times that this user can log in with an expired password, set this option to YES.  If the user should always be able to log in with an expired password, set this option to NO.  After you have made your selection, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save your changes, press the CANCEL key and then the ESCAPE key.

                                            Page 1 of 2─╤
@>Θ                   LIMIT GRACE LOGINS HELP

If this option is set to YES, you can enter the number of times that the user can continue to log in with the expired password.  If the user does not change the password within the specified number of logins, he will not be allowed to log in again until the SUPERVISOR grants the user additional grace logins or changes the user's password expiration date to a date that is not past.

                                                 Page 2 of 2`╫
64r             GRACE LOGINS ALLOWED HELP

Enter the number of grace logins that the user
should be allowed after his password has expired. 
When you are finished, press the SELECT key or the
ESCAPE key.

If you have changed this setting and do not
want to save your changes, press the CANCEL key and
then the ESCAPE key.

                                       Page 1 of 2╓╒EC┐                  GRACE LOGINS ALLOWED HELP

After a user's password has expired, the user will be given the 
specified number of grace logins using the expired password.  
Each time the user logs in, he will be informed that the
password is expired and will be asked to change it.  If the 
password is not changed before the grace logins are used up, 
the user will not be able to log in again until the SUPERVISOR 
gives him additional grace logins or sets the password expiration 
date to a date that is not passed.

When the user changes the password, the "Grace Login Allowed"
value is used to reset the "Remaining Grace Logins" field.

                                                  Page 2 of 2?=▄               REMAINING GRACE LOGINS HELP

This field shows the number of remaining grace logins
that the user has.  Each time the user logs in while
his password is expired, the file server decrements this
number.  When this number reaches zero, the user will not be
allowed to log in.  The file server will reset this number
to the value in "Grace Logins Allowed" each time the user
changes his password.

Set the number of remaining grace logins to the number
of times that the user can log in with an expired password
and press the SELECT key or the ESCAPE key.

If you have changed this number but do not want to
save it, press the CANCEL key and then the ESCAPE key.

                                              Page 1 of 1√▐7
5╕            REQUIRE UNIQUE PASSWORDS HELP

If you want to require this user to use a new
password each time he changes his password, set
this option to YES.  Otherwise, set this option 
to NO.  When you have made your selection, press 
the SELECT key or the ESCAPE key.

If you have changed this setting and do not want
to save the change, press the CANCEL key and then 
the ESCAPE key.

                                         Page 1 of 2+▌A?)                 REQUIRE UNIQUE PASSWORDS HELP

If a user is required to have unique passwords, the file
server will remember the user's previous passwords.  The user
will not be allowed to change his password to a password that
he has previously used.

A user can change the password several times on the same day
without the file server remembering the new passwords as
passwords that the user has previously used.  This keeps
passwords that the user has not really used from being locked
out as previous passwords by the file server.  It also keeps
users who do not want to change their passwords from cycling
through a large number of passwords until the file server
forgets the password they were just using and allows them to
use it again.

                                                   Page 2 of 27
5Ñ               LIMIT DISK SPACE HELP

If you want to limit the amount of disk space this user can use, enter YES.  If you do not want to limit the amount of disk space he can use, enter NO. When you have finished, press the SELECT key or the ESCAPE key.

If you have changed this setting and do not want to save the change, press the CANCEL key and then the ESCAPE key.

                                       Page 1 of 1GE                     MAXIMUM DISK SPACE HELP

Enter the maximum disk space that this user should be able to use on the file server.  Enter the amount of disk space in kilobytes (1K is 1024 bytes).  Since disk space is allocated in 4K blocks, the amount of space you entered will be rounded up to a 4K boundary.  Files are allocated in 4K blocks also, so the  actual disk space that a file is using is usually larger than the file size shown by a directory listing (the size must be rounded up to the next 4K boundary).  

When you have entered the disk space limit, press the SELECT key 
or the ESCAPE key.  

If you have changed this limit and do not want to save the changes, 
press the CANCEL key and then the ESCAPE key.

                                                    Page 1 of 1{Θ?==              SET MULTIPLE USERS RESTRICTIONS HELP

This form shows restrictions that can be placed on the
marked users' accounts.  Each field on this form is
described below.  Note that the fields associated with
limiting disk space will not appear if that option was 
not selected during the file server installation.

ACCOUNT DISABLED
     If this field is set to YES, the user's account is
     disabled.  The user cannot log in to the file server
     again until the "Account Disabled" field is set to NO.

                                                Page 1 of 11∞&τKIî                    SET MULTIPLE USERS RESTRICTIONS HELP

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, it indicates that the account is only
     a temporary account.  Temporary accounts are automatically disabled
     at a specified date and cannot be used after that date unless the
     SUPERVISOR reenables the account.  If this option is set to NO,
     the account is permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the field "Account Has Expiration" date is set to YES, this
     field contains the date the account expires.

                                                           Page 2 of 11úε{ΘKIl                    SET MULTIPLE USERS RESTRICTIONS

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, it indicates that the user is limited 
     as to the number of workstations he can be logged in at the same
     time.  If this field is set to NO, the user is not limited, and
     can log in to as many stations as the server supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, this
     field specifies the maximum number of stations that the user can 
     log in to at the same time.

                                                           Page 3 of 11≡±∞FD5               SET MULTIPLE USERS RESTRICTIONS HELP

ALLOW USER TO CHANGE PASSWORD
     If this field is set to YES, the user can change the password
     associated with his account.  If this field is set to NO, the
     user cannot change his own password.  Only a user with
     supervisor privileges can change the password.

     This option is intended to be used with accounts that many 
     people will share, such as the GUEST account.  On these types 
     of accounts a user who knows the password should not be able 
     to change the password and lock out other users.  If this 
     option is set to NO, the user cannot change the password. 
     In addition SYSCON will not allow the user to edit the 
     login script for the account.

                                                      Page 4 of 11Ω⌠úεJHΓ                  SET MULTIPLE USERS RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on his account.  If this option is set to NO, the user is
     not required to have a password.  If the user is not required to
     have a password, he can choose for himself whether he wants a
     password on his account.  A password must be required in
     order to require the user to change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field contains
     the minimum length of the required password.  This length can be
     between 1 and 20 characters.

                                                           Page 5 of 11°≡±LJ                   SET MULTIPLE USERS RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field was set to YES and the "Allow User
     To Change Password" field was set to YES, this field indicates 
     whether the user is required to change his password at regular 
     intervals.  If this field is set to YES, the user's password will 
     expire periodically and he will be asked to change the password. 
     If this field is set to NO, the user's password will never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, this
     field contains the number of days the user can use a password before
     the password expires.

                                                           Page 6 of 11(ⁿΩ⌠OM·                   SET MULTIPLE USERS RESTRICTIONS HELP

DATE PASSWORD EXPIRES
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates the next date on which the user's password expires.
     After this date is past, the file server will inform the user that his
     password has expired each time the user logs in to the file server.  
     If the "Limit Grace Logins" field is set to YES, the file server will 
     not allow a user to log in if the expired password has not been 
     changed within the specified number of grace logins.

     Each time the user changes his password, the file server will
     automatically set the next password expiration date.  If the SUPERVISOR
     changes a user's password, the file server will mark the password
     as expired.  This will force the user to select a new password (except 
     in the case where the user is not allowed to change the password).

                                                             Page 7 of 11+°LJδ                 SET MULTIPLE USERS RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates whether the user is forced to change the password,
     or if an expired password is simply a reminder to change to a new
     password.  If this field is set to YES, the user has a limited
     number of chances to change the password.  If the user does not
     change the password within the specified limit, he will no longer be
     able to log in.  If this field is set to NO, the user will not be
     required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field
     indicates the number of chances the user gets to change his password
     when it is expired.  If the user does not change the password within
     the specified number of logins, he will not be allowed to log in.
                                                            Page 8 of 11┼(ⁿB@é            SET MULTIPLE USERS RESTRICTIONS HELP

REMAINING GRACE LOGINS
     If the "Limit Grace Logins" field is set to YES, this
     field shows the remaining number of times the user can 
     log in using an expired password.  When this number
     reaches zero, the user will not be allowed to log in
     again until the SUPERVISOR gives the user more grace
     logins, or changes the password expiration date so that
     the password is not expired.  This field is automatically 
     reset to the value in "Grace Logins Allowed" each time 
     the password is changed.

                                              Page 9 of 11 )+@
>L             SET MULTIPLE USERS RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this
     field indicates whether the user should be forced to use
     a different password each time the password is changed. 
     If this option is set to NO, the user can change the
     password to any password, even if it is a password used 
     previously.  If this option is set to YES, the user
     will not be allowed to change the password to a password
     that was used previously.

                                               Page 10 of 11┼LJ─                 SET MULTIPLE USERS RESTRICTIONS HELP

LIMIT DISK SPACE
     This option will appear only if the option to track the amount of
     disk space a user is using was selected during the file server
     installation.  If this field is set to NO, the user can use as much
     disk space as there is available.  If this option is set to YES,
     the "Maximum Disk Space" field specifies the maximum amount of disk
     space that the user can use on the file server.

MAXIMUM DISK SPACE
     If the "Limit Disk Space Option" is set to YES, this field
     specifies the maximum amount of disk space the user can use.  Since
     disk space is allocated in blocks of 4K (4096 bytes), this field is
     used to specify how many blocks a user can allocate.  A file's size 
     must be rounded up to the next 4K boundary when determining the 
     amount of disk space it is using.
                                                          Page 11 of 11
5	3<   SAVE RESTRICTIONS FOR MULTIPLE USERS HELP

If you want all the marked users'restrictions 
to be set to these restrictions, select YES.  
If you do not want them set to these restrictions 
select NO.  If you want to edit the restrictions 
again, press the ESCAPE key.

                                  Page 1 of 1½?=:                   ACCOUNT RESTRICTIONS HELP

This form shows restrictions that have been placed on the
selected users account.  Each field on this form is 
described below.  Note that the fields associated with
limiting disk space will not appear if that option was not
selected during the file server installation.

ACCOUNT DISABLED
     If this field is set to YES, the user's account is
     disabled.  The user cannot log in to the file server
     again until the "Account Disabled" field is set to NO.

                                                Page 1 of 11MY
MKè                       ACCOUNT RESTRICTIONS HELP

ACCOUNT HAS EXPIRATION DATE
     If this option is set to YES, it indicates that the account is only
     a temporary account.  Temporary accounts are automatically disabled
     at a specified date and cannot be used after that date unless the
     supervisor reenables the account.  If this option is set to NO, the 
     account is permanent and does not have an expiration date.

DATE ACCOUNT EXPIRES
     If the field "Account has Expiration" date is set to YES, this field 
     contains the date the the account expires.

                                                           Page 2 of 11╒½LJp                        ACCOUNT RESTRICTIONS HELP

LIMIT CONCURRENT CONNECTIONS
     If this field is set to YES, it indicates that the user is limited 
     to the number of workstations where he can be logged in at the same
     time.  If this field is set to NO, the user is not limited, and
     can log in from as many stations as the server supports.

MAXIMUM CONNECTIONS
     If the "Limit Concurrent Connections" field is set to YES, this
     field specifies the maximum number of stations that the user can log
     in from at the same time.

                                                           Page 3 of 11MJH'                     ACCOUNT RESTRICTIONS HELP

ALLOW USER TO CHANGE PASSWORD
     If this field is set to YES, the user can change the password
     associated with his account.  If this field is set to NO, the
     user cannot change his own password.  Only a user with
     supervisor privileges can change the password.

     This option is intended to be used with accounts that many people
     will share, such as the GUEST account.  On these types of accounts
     a user who knows the password should not be able to change the
     password and lock out other users.  If this option is set to NO,
     the user cannot change the password.  In addition, SYSCON will
     not allow the user to edit the login script for the account.

                                                      Page 4 of 11╒JHµ                       ACCOUNT RESTRICTIONS HELP

REQUIRE PASSWORD
     If this option is set to YES, the user is required to have a
     password on his account.  If this option is set to NO, the user is
     not required to have a password.  If the user is not required to
     have a password, he can choose for himself whether he wants a
     password on his account.  Note that a password must be required in
     order to require the user to change the password.

MINIMUM PASSWORD LENGTH
     If the "Require Password" field is set to YES, this field contains
     the minimum length of the required password.  This length can be
     between 1 and 20 characters.

                                                           Page 5 of 116NL                       ACCOUNT RESTRICTIONS HELP

FORCE PERIODIC PASSWORD CHANGES
     If the "Require Password" field was set to YES, and the "Allow User to      Change Password" field was set to YES, this field indicates if the          user is required to change his password at regular intervals. If this       field is set to YES, the user's password will expire periodically and       he will be asked to change the password.  If this field is set to NO,       the user's password will never expire.

DAYS BETWEEN FORCED CHANGES
     If the "Force Periodic Password Changes" field is set to YES, this
     field contains the number of days the user can use a password before
     the password expires.

                                                           Page 6 of 11FNL°                         ACCOUNT RESTRICTIONS HELP

DATE PASSWORD EXPIRES
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates the next date on which the user's password expires.
     After this date is past, the file server will inform the user that his
     password has expired each time the user logs into the file server.  In
     addition, if the "Limit Grace Logins" field is set to YES, the file
     server will not allow a user to login if the expired password has not
     been changed within the specified number of grace logins.

     Each time the user changes his password, the file server will set the
     next password expiration date automatically.  If the SUPERVISOR
     changes a user's password, then the file server will mark the password
     as expired, forcing the user to select a new password (except in the
     case where the user is not allowed to change the password).

                                                             Page 7 of 11J#6MK∞                       ACCOUNT RESTRICTIONS HELP

LIMIT GRACE LOGINS
     If the "Force Periodic Password Changes" field is set to YES, this
     field indicates whether the user is forced to change the password,
     or if an expired password is simply a reminder to change to a new
     password.  If this field is set to YES, the user has a limited
     number of chances to change the password.  If the user does not
     change the password within the specified limit he will no longer be
     able to login.  If this field is set to NO then the user will not be
     required to change the password when it expires.

GRACE LOGINS ALLOWED
     If the "Limit Grace Logins" field is set to YES, this field
     indicates the number of chances the user gets to change his password
     when it is expired.  If the user does not change the password within
     the specified number of logins then he will not be allowed to log in.
                                                            Page 8 of 11▐%F?=|                ACCOUNT RESTRICTIONS HELP

REMAINING GRACE LOGINS
     If the "Limit Grace Logins" field is set to YES, this
     field shows the remaining number of time that the user
     can log in using an expired password.  When this number
     reaches zero the user will not be allowed to log in
     again until the supervisor gives the user more grace
     logins, or changes the password expiration date so that
     the password is not expired.  This field is
     automatically reset to the value in "Grace Logins 
     Allowed" each time the password is changed.

                                              Page 9 of 11 ?(J#A
?I                  ACCOUNT RESTRICTIONS HELP

REQUIRE UNIQUE PASSWORDS
     If the "Require Password" field is set to YES, this
     field indicates whether the user should be forced to use
     a different password each time the password is changed. 
     If this option is set to NO, the user can change the
     password to any password, even if it is a password he has
     previosly used.  If this option is set to YES, the user
     will not be allowed to change the password to a password
     he has used previously.

                                               Page 10 of 11▐%KI╞                        ACCOUNT RESTRICTIONS HELP

LIMIT DISK SPACE
     This option will appear only if the option to track the amount of
     disk space a user is using was selected during the file server
     installation.  If this field is set to NO, the user can use as much
     disk space as there is available.  If this option is set to YES,
     the "Maximum Disk Space" field specifies the maximum amount of disk
     space that the user can use on the file server.

MAXIMUM DISK SPACE
     If the "Limit Disk Space Option" is set to YES, this field
     specifies the maximum amount of disk space the user can use.  Since
     disk space is allocated in blocks of 4K (4096 bytes), this field is
     used to specify how many blocks a user can allocate.  Note that a
     file size must be rounded up to the next 4K boundary when
     determining the amount of disk space it is using.
                                                          Page 11 of 11ECß                  LENGTH OF ACCOUNT LOCKOUT HELP

The "Length of Account Lockout" field is used to specify how
long an account should be locked if an intruder is trying to break
into the account.  The intent of locking an account is to make the
amount of time needed to guess a password by randomly trying
passwords so long that it is impractical.

Enter the days, hours, and minutes that an account should
remain locked after an intruder is detected trying to break into
the account.  When you have finished, press the SELECT key or the
ESCAPE key.

If you have made changes to this field and do not want to
save the changes press the CANCEL key and then the ESCAPE key.

                                                     Page 1 of 1{2NLM                         ACCOUNT BALANCE HELP

This form shows the user's current account balance and the user's
credit limit.  The account balance is the amount of funds that the user
currently has.  Each time the user is charged for a service, his account
balance is decremented.

The credit limit determines how low the user's account balance can
drop before he will no longer receive services that are being charged for. 
If the user is given unlimited credit, he will always be given services
and the account balance will only serve as an indicator of how much service
the user is receiving.  If the user has limited credit, then when the
account balance falls below the specified credit limit, the user will no
longer receive services that are being charged for.

                                                                Page 1 of 2/M	K╒                         ACCOUNT BALANCE HELP

A credit limit of zero means the user cannot receive any further
services when his account balance drops below zero.  A negative credit
limit means the user's account is allowed to go in the hole, until it
reaches the credit limit.  A positive credit limit means the user is
required to have specified amount of funds in his account at all times.

                                                               Page 2 of 2
B@≈                  OTHER USERS AND GROUPS HELP

This menu lists the users and groups that do not manage the 
selected user or group.  To allow one of these users or groups
manage the selected user or group, highlight the desired user 
or group, then press the SELECT key.  To make several of these 
users or groups manage the selected user or group, highlight 
each of the desired users and groups with the MARK key, then 
press the SELECT key.

                                               Page 1 of 1	
=;├               OTHER USERS AND GROUPS HELP

This menu lists the users and groups that do not have
workgroup managers rights.  To make one of these users
or groups a workgroup manager, highlight the desired
user or group and press the SELECT key.  To make several
of these users or groups a workgroup manager, highlight
the desired users and groups with the MARK key; then press
the SELECT key.

                                             Page 1 of 1?=¿                    NETWORK ADDRESS HELP
   
You must know the address of the workstation where you want this user to be able to log in.  If you do not know the address, log in to the workstation and type "userlist /a."  The entry marked with an asterisk (*) will show the address of the workstation.  Enter the network portion of the address in this edit box. (The network portion is the 8-digit hex number.)

When you have entered the address, press the SELECT key or the ESCAPE key.

If you do not want to enter an address, press the CANCEL
key or use the BACKSPACE key to delete all input; then press
the ESCAPE key.

                                               Page 1 of 1MKb                             NODE ADDRESS HELP

You must know the address of the workstation where you want this user to be able to log in.  If you do not know the address, log in to the workstation and type "userlist /a."  The entry marked with an asterisk (*) will show the address of the workstation.  You should have entered the network portion of this address already.  If you did not, delete any entry you have made in this field and then press the ESCAPE key.  Otherwise, enter the node portion of the address in this edit box.  (The node portion is the 12-digit hex number.)

When you have entered the address, press the SELECT key or the ESCAPE key.

If you do not want to enter an address, press the CANCEL key or use the BACKSPACE key to delete all input; then press the ESCAPE key.

                                                            Page 1 of 1GE                     INSTALL ACCOUNTING HELP

Accounting has not been installed on this file server.  You
should install accounting if you want to track when users log in and
log out from the file server or if you want to set up account
balances for users and charge them for services that they receive. 
If you do not want to do these things, do not install accounting.

If you want to install accounting, select YES; otherwise,
select NO or press the ESCAPE key.

                                                      Page 1 of 1A
?p                   CANCEL TIME CHANGES HELP

If you want all the changes you have made to the time
restrictions to be undone, answer YES; otherwise, answer NO
or press the ESCAPE key.

If you answer YES, the time restrictions will be restored to
the original restrictions before you started to edit them.

                                                   Page 1 of 1
;9   CHANGE STATION RESTRICTIONS FOR MULTIPLE USERS HELP

If you want all the marked users to be restricted
so that they can only log in from the listed workstation
addresses, select YES.  If you do not want the
marked users station restrictions to be changed,
select NO.  If you want to edit the station restrictions
again, press the ESCAPE key.

Note that setting a user's station restriction
list to have no addresses listed will mean that the user
can log in from anywhere.

                                           Page 1 of 1	=
;≥            ALLOW LOGIN FROM ALL NODES HELP

If the selected user should be able to log in from any workstation on the specified network, highlight YES.  If you want to specifically list the node addresses that the user is allowed to log in from, highlight NO.  When you have made your selection, press the SELECT key.

If you do not want to allow log in from any workstation 
with the network address that you entered, press the 
ESCAPE key.

                                           Page 1 of 18	6e    SAVE TIME RESTRICTIONS FOR ALL MARKED USERS HELP

If you want all the marked users' time restrictions
to be changed to these restrictions, select YES. 
If you do not want their time restrictions to be
changed, answer NO.  If you want to continue editing
the time restrictions, press the ESCAPE key.

                                          Page 1 of 1	
=;k                 CANCEL CHARGE CHANGES HELP

If you want all the changes that you have made to these
charge rates to be undone, select YES; otherwise, select
NO or press the ESCAPE key.

If you select YES, all the charge rates will be
restored to the values they had when you first started
editing them.

                                               Page 1 of 1
31p         CONFIRM CLEAR ERROR LOG HELP

If you are finished looking at the errors
recorded in the error log and want to clear
them from the log, select YES.  If you will
want to look at these same errors again at a
later date, select NO.  If you want to continue 
looking at the error log right now, press the 
ESCAPE key.

                                  Page 1 of 1yMB@e                 EDIT SYSTEM AUTOEXEC FILE HELP

The autoexec file contains commands that the file server
should automatically execute when it is first brought up.  Any
commands that can be typed at the file server console can be
entered in this file (with the exception of the DOWN command).

Enter the commands exactly as you would at the file server
console, one command per line.  When you are finished press the
ESCAPE key.  If you have made changes to this file and do not
want to save the changes, press the CANCEL key and then the
ESCAPE key.

                                                  Page 1 of 2ⁿJJH|                    EDIT SYSTEM AUTOEXEC FILE HELP

One of the main uses of the system autoexec file is to set up printing on the file server.  A sample system autoexec file is shown below.

     Spool 0 to Queue LaserJet
     Spool 1 to Queue LinePrinter
     Spool 2 to Queue Management
     Printer 0 add Queue LaserJet at Priority 5
     Printer 0 add Queue Management at Priority 1
     Printer 1 add Queue LinePrinter at Priority 1

For a complete description of all commands that can be used in the
system autoexec file, see the "Console Reference" manual.

                                                            Page 2 of 2	
	53╟              NO RIGHTS TO RENAME HELP

You do not have the necessary supervisor or
workgroup manager rights to rename the specified
user or group.

                                       Page 1 of 1	
75       INSUFFICIENT RIGHTS TO ADD TRUSTEE HELP

You do not have Parental rights in the specified
directory.  In order to grant or revoke rights to a
user or group in a directory, you must have Parental
rights in that directory.

                                       Page 1 of 1ECE          SET MULTIPLE DIRECTORIES TRUSTEE RIGHTS HELP

This list shows the rights that will be assigned to the
selected user in each of the marked directories.  You have the
following options:

     INSERT
          Grant additional rights.

     DELETE
          Revoke the highlighted right.  To revoke several rights
          simultaneously, highlight the rights with the MARK key;
          then press the DELETE key.

When the rights you want to assign are listed, press the ESCAPE
key to assign the rights.
                                                       Page 1 of 1
<:ä       NO RIGHTS TO ALTER TRUSTEE ASSIGNMENTS HELP

You do not have rights to alter trustee assignments
in the specified directory.  You must have the Parental
right in that directory in order to alter trustee
assignments.

You have supervisor rights over the selected user/group 
because you are a workgroup manager of the user/group.  
The rights given to you as a workgroup manager do not 
include any special rights to directories.

If you need to be able to alter trustee rights in the 
specified directory, ask the network supervisor to grant 
you Parental rights in that directory.

                                           Page 1 of 1
20¢               SELECT FILE HELP

Enter a filename or press INSERT to select from a list of existing files.

                                    page 1 of 1		20─            VOLUME SPACE RESTRICTIONS

Enter the number of 4K blocks of disk space the
selected user will be allowed to use on the
selected volume.

                                    page 1 of 1B@?                 USER DISK VOLUME RESTRICTIONS

If you wish to limit the amount of space that a user may have on a volume, type "Y" at the "Limit Volume Space?" prompt. If you wish to remove the space restriction on a volume type "N" at the "Limit Volume Space?" prompt.

"Volume Space Limit" is the maximum number of blocks the user can use on the selected volume.

"Volume Space In Use" is the number of blocks in use by the user on the volume.
   
Enter a new "Volume Space Limit", and press the select key.

                                                    page 1 of 10
.'        USER DISK VOLUME RESTRICTIONS

"Volume Space Limit" is the maximum number of blocks the selected user can use on the selected volume.

"Volume Space In Use" is the actual number of blocks in use.
                                                                                page 1 of 1
20ê               SELECT A VOLUME

Highlight a volume to select and press the  SELECT key.

                                    page 1 of 1
20É              SELECT FILES HELP

Enter a filename or press INSERT to select a
file from a list.

                                    page 1 of 1	
86            TRUSTEE FILE ASSIGNMENTS HELP

This menu lists the files in the selected
directory and its subdirectories for which the
highlighted user or group's trustee rights have been
explicitly granted or revoked.

                                          Page 1 of 1─_	
0.         TRUSTEE FILE ASSIGNMENTS HELP

This menu lists the files in the selected
directory and its subdirectories in which the
highlighted user's or group's trustee rights
have been explicitly granted or revoked. 

                                  Page 1 of 2º^NL_                         TRUSTEE FILE ASSIGNMENTS HELP

Because you have supervisor privileges, you can modify trustee
assignments by using the following keys:

  INSERT
      Explicitly declare the user or group's trustee rights for a file.

  DELETE 
      Remove the highlighted trustee rights declaration. To remove several        declarations simultaneously, highlight them with the MARK key and           press the DELETE key.

  SELECT
      Change the rights explicitly granted or revoked for the highlighted         file.

                                                                Page 2 of 2		20▌              Browse Files Help

Highlight a filename, and press the SELECT key
to select that file.  The filename will then
be inserted into the edit buffer on the screen.

                                    page 1 of 1