NetWare Message File: dhcpcfg.nlm 2.00, Tran 0 |'Jgy (.Jc|#=RYo .;Ydu 8 H _ ~  4 O [ + B ~   4 J n z  ) @ Oq/<Oa{!6Oh"0:Hd},FRj!I`y &4BP^lzTw1Ua0F7HY(KZkCfxq%77@Oiv /@;~ S!|!!!!!!!!!!!""4"g"t"""#Configuration MenuDHCP Server Console2.0IP Address AssignmentSubnetwork ProfileWorkstation TypeExitDrive PathsWorkstationWorkstation Name:Enter Workstation TypeWorkstation IP Address Assignment Delete IP Address AssignmentInternet Address:Physical Address:Subnetwork%s Workstation TypeAvailable Link DriversBoot Drive: :Login Server Setup:Server NameShell Setup:Shell Filename:Link DriverName:Frame Type For IPX: Interrupt: Port Address: Available Frame TypesAvailable Interrupt LevelsDelete Workstation TypeAddress AssignmentNumber of WorkstationsAvailable SubnetworksEnter Subnetwork Profile NameDelete Subnetwork ProfileAutomatic and StaticStatic%s Subnetwork ProfileSubnetwork Address:Subnetwork Mask:Default Router:Domain Name System Used:Domain Name:Primary Name Server:Secondary Name Server:Tertiary Name Server:In Use:Available:Start Address:End Address:View Configured Workstations:Local Drive PathSYS Drive: :Shared LWG DriveCustomPrivate Path:Shared Drive: :SYS:LAN WorkGroup DrivesUpdate System Login ScriptAutomatic IP Address Assignment:LAN WorkGroup ParametersSubnetwork NameEnter Workstation Name%-20.20s %-20.20s %-23.20s %s: Workstation Subnetwork Auto ConfiguredSubnetwork Name Address Address AssignmentWorkstation TypesEnter Subnetwork Address%-30.25s %-20.20s %-20.25sFrame Type:Cannot Get LANWORKGROUP Bindery Object IDFile %s does not exist. DHCPCFG will create it.Cannot Open Products Database sys:system/products.dat :E%xCannot Read Products Database sys:system/products.dat :E%xCannot Get Volume NameCannot Close Products Database sys:system/products.dat :E%xFrame Type For IP: Assign All Subnet IP Addresses:Internet Address Physical Address Workstation Link Driver Setup:Optional Tuning Parameters:Invalid IP Address %sFailed to Update the Subnet ProfileETHERNET_IIETHERNET_SNAPTOKEN-RING_SNAPInvalid Address Range: %s to %sMust Specify Subnet Mask before Address Range%-35.25s %-25.20 %-20.20s %-20.20s %-23.20s%-32.30s %-30.25s %sInvalid Subnet Mask %sWARNING!! Deleting the Subnet Profile will delete all the Workstation IP Assignments for this Subnetwork.Delete Subnet Profile?Save Workstation IP Assignment?IP Address not in a known Subnet profileSubnet %s is already used or there is a conflict with another subnetDelete WorkStation IP Assignment?Could not create the file %s.Could not write to the file %s.Save Subnet Profile?Subnetwork Profile:Invalid Path %sInvalid Drive %cWorkstation Already DefinedIP Address Already In UseBuffer Size:Number of Buffers:Memory Pool Size:Maximum Number of Boards:Maximum Number of Stacks:Optional Tuning ParametersOptional Parameter Filer 1Optional Parameter Filer 2Available Frame Types for IPAvailable Frame Types for IPXAvailable InterruptsAvailable Port AddressesAvailable NetWare ShellsSave LAN WorkGroup parameters?Could not read from the file %sDelete Workstation Type?Router IP Address %s not in this SubnetCould not open the file %sSpecify OtherEnter Frame TypeNOVELL_RX-NETFDDI_SNAPIBM_PCN2_SNAPInvalid physical address %sSlot Number: Memory: DMA: Media Port: ROM Setup: Adapter Type: Line Speed: FIFO: Availabe Memory AddressesSlot NumberAvailable DMA AddressesAvailable Media PortsROM SetupAvailable Adapter TypesAvailable FIFOsAvailable Line SpeedsNew Workstation NameNew Subnetwork Profile NameFailed to Delete Workstation Type EntryFailed to Update the Workstation Entry.Save Workstation Type?DMA1: DMA2: Directory or File %s does not exist: E%dOptional Parameter %2d:Optional Driver Parameters:Optional Driver ParametersParameter 1:Parameter 2:Parameter 3:Parameter 4:Parameter 5:Parameter 6:Parameter 7:Parameter 8:Parameter 9:Parameter 10:Parameter 11:Parameter 12:Parameter 13:Parameter 14:Parameter 15:Workstation Type %s already defined.New Workstation Type NameMLID Driver %s Not Supported: Possible Missing INS File.Cannot read the Driver INS file %sExit DHCPCFG?The subnet mask %s is not contiguous. It is not supported.DNS Server IP Address %s is Already SpecifiedNo Primary DNS Server SpecifiedNo Secondary DNS Server Specified.DNS Not Setup Properly; Must Specify both a DNS Domain Name and a Primary DNS Server.TOKEN-RINGETHERNET_802.2ETHERNET_802.3The subnet address appears to be an IP Address. Proceed?TOKEN-RING MSBTOKEN-RING LSBTOKEN-RING_SNAP MSBIP Address Assignment not saved, must specify IP address.Media Type:Available Network Media TypesOTHERS Media TypesSave "OTHER" media type?Bootp Service ManagementBootp Service Management MenuExcluded NodesPhysical Address Comments %-40.30s %-30.30sDelete Excluded Node?Node %s is already specified in the no responding node list.Enter Physical AddressEnter CommentsNetWare/IP ConfigurationNumber of Available IP Address:NetWare/IP Domain Name:Get Nearest Server Broadcast:Save NetWare/IP Configuration?NIS Domain Name:DNS Domain Name:NIS Domain is not specified. Use "LAN WorkGroup Parameters" menu to specify it.The tagret machine "%s" is not an NIS server.NIS error occurs in this NIS domain: %s. Error code = %d.Cannot access this NIS domain: %s.Preferred DSS:Nearest Servers:Number of Auto Retries:Auto Retry Interval in Second:Version 1.1 Client?Router IP Address %s is Already SpecifiedPreferred DSS IP Address %s is Already SpecifiedNearest Server IP Address %s is Already SpecifiedLease Time Hours: Days:%-32.30s %-30.25sFrame Type%sFrame Type %s is already specified in the Frame Type ListThe Frame Type configuration limit of %d has been reachedPhysical address %s is invalid. The same physical address can not be configured multiple times in the same subnetwork.Available Subnet MasksFailed to Update the Excluded Node EntryNetWare/IP Not Setup Properly. A NetWare/IP DNS Domain Name Must Be Specified.NFS Client Configuration:Time Zone:Daylight Savings:Use NIS:NIS Server IP:Authentication Server IP:Client Name:Buffer space:Available Time ZonesNFS Client ConfigurationSave NFS Client Configuration?Load LPR Print Client Driver:Primary Terminal Emulation:XFonts:Terminal Emulation ServicesAvailable XFontsPhysical address %s is invalid. The same physical address can not be configured multiple times.Workstation SearchFill in one field to search for, then press The Physical Address must be configured. The IP Address Assignment will not be saved.The Internet Address must be configured. The IP Address Assignment will not be saved.The Subnet Profile %s will not be saved. A Frame Type must be specified.The SYS:\ETC\BOOTPTAB file is open and can not be updated. The action you have taken will appear but will not be stored until the SYS:\ETC\BOOTPTAB file is closed.DHCPCFG.NLM: Unable to open %s.DHCPCFG.NLM: Error writing to %s.Workstation %s Not FoundDomain Name System ConfigurationDHCPCFG.NLM: File SYS:\PUBLIC\SYSDOCS.NEW missing. Please update SYSDOCS.CFG manually.Lease Time Hours: Days:NetBIOS Parameters:Node Type:Scope:NetBIOS ParametersAvailable NetBIOS Node TypesB NodeP NodeM NodeH NodeLease Began:Boot Server IP Address:Boot Image File Name:Renewal(T1) Time: % Rebinding(T2) Time: %Primary DSS:Workstation name %s is invalid. The workstation name can not be configured multiple times in the same subnetwork.DHCPCFG.NLMUnable to allocate resource tag.Unable to initialize with NWSNUT.