NetWare Message File: IPXGW 1, Tran 1 2)G\_t$`#_yFr* t d 0 n D }  _ >)+.[+R4gR)]K J4h*hIEn&\I&JkN\4 Z  2!s!!!!$"M""""#^######$b$#$$$$3%a%%&G&&&&/'|'''((:(b(((())U)}))))*Q*****Q******+ ++!+\'+T+W++++\W+\++\,(,\7,L,\\,i,v,T+,,,,\+,-$-L-|----0.5.q.../@/~////0G0h0001h111$2'2O2k22222<<< BAD MESSAGE >>>GATEWAYIP_GATEWAYIPX/IP Gateway Information LevelIPX/IP Gateway Audit LogIPX/IP Gateway Access ControlIPX/IP Gateway Debug%c %s:: %s Error-1: Failure loading message table, Gateway is terminating! Thread spawning failure, Gateway is terminating!:%02xFailed to open TCP listen endpoint, Gateway is terminating!Failed to bind TCP listen endpoint, Gateway is terminating!Failed to get address of TCP listen endpoint, Gateway is terminating!Address %s bound to endpoint to listen for connection requestsListen failed on TCP listen endpoint, Gateway is terminating!Memory allocation failure while reading license informationClient license limit = %dThe attribute <%s> has %d value(s). Removing the existing port value %d. Adding the new port value of %d. Modified the IPX/IP Gateway Object's Port !!! [root]Logged in as the IPX/IP Gateway object!! No Gateway license, Gateway is terminating!Memory allocation error, Gateway is terminating!The server is out of memoryUnable to login to NDS as the gateway objectUnable to update the port attribute in the NDS gateway objectThere has been an NDS failure, Gateway clients must locate server via SAPThere has been an NDS failure; to use the Gateway anyway, reload with access control turned offService Advertising failure, Gateway is terminating!IPX/IP Gateway currently has active clients, unloading it will abort their communications!IPX/IP Gateway currently has active clients, bringing down server will abort their communications!Gateway terminated by downing serverMust delay before completing IP data channel with client address %sFailed (%d) completing IP data channel with client address %sNew IP data connection with client %s, complete channel count = %dFailed to set the client socket to inline OOB data for client %sMemory allocation failure while accepting new connection, Gateway is terminating!New client command connection with %s, client count = %dSelect returned: %d RPC: %d DATA: %d Failure to accept a new client command connection (%d)Failure to accept a new client IP data connection (%d)USAGE: load ipxgw Invalid command line argument (%s), Gateway is terminating!Too many command line arguments, Gateway is terminating!accesscontrolonoff-GWChange the IPX/IP Gateway information logging level: 1=Error, 2=Warning, 3=Info.Turn IPX/IP Gateway audit logging of client connections /.Turn IPX/IP Gateway Access Control checking /.0=no debug, 1=access controlResourceTag for the new Gateway Console Sets 0x%08x [ 0x%08x ] RpcioObtainMsgStruct: SERVER MEMORY SHORTAGERpcIO: Too few unused buffers, ALLOCRpcioReturnMsgStruct entered: msg_ptr(0x%x)RpcioReturnMsgStruct() called with a NULL pointerRpcIO: Too many unused buffers, DEALLOCRpcioAllocMsg entered: msg_cnt(0d%d)RpcioDeallocMsg entered: msg_cnt(0d%d)rpcio_rpt_evt_err entered: RpcConn(0x%x) CommChannel(0x%x) event(0x%x) errno(0x%x)rpcio_rpt_evt_err entered: RpcConn(0x%x) event(0x%x) errno(0x%x)rpcio_send_to_client entered, rpcptr(0x%x)rpcio_send_to_client: msg len(%d) rpcio_rcv_length: imcomplete length field receivedrpcio_proc_whole_msg entered: rpcptr(0x%x)rpcio_proc_whole_msg entered rpcio_proc_whole_msg: -INTTEST- wrap RPC msg (0x%x) to sendQrpcio_socket_poll entered: polling IP EndPt errorrpcio_socket_poll entered: polling IPX EndPt errorrpcio_INTTEST_openbind entered: rpcptr(0x%x)==== rpcio_inttest_openbind entered t_open failed== fd is: 0x%x bind failedlisten failedjkc.logw+rpcio_INTTEST: RpcConn allocated (0x%x) ==== RpcConn allocated RpcIoThread: !!!! exiting! allocated(%d) Unused(%d)Invalid IP socket handle (%d) passed to ClearCommChannelTblEntry()Attempt was made to use invalid sockId: sockHan=%d sessionNo=%dExecuting helloRpc() for client %sReceived invalid client command, communication with client %s abortedNew client (%s) refused, license limit (%d) reachedExecuting socketRpc() for client %sReceived invalid message, communication with client %s abortedFailed to open new IP socket for client %sFailed to set new IP socket to inline OOB data for client %sMemory allocation failure while opening IP socket, socket closedMaximum number of IP sockets reached (%d), socket() request deniedSuccessfully opened new socket for client %s, handle=%d session=%dExecuting bindRpc() for client %sClient %s tried to bind IP socket in improper stateFailed to bind new IP socket for client %sFailed to retrieve address of new IP endpoint from systemAddress %s bound to new IP endpointFailed to bind IP socket during connectRpc for client %sAddress %s bound to IP socket during connectRpc for client %sExecuting connectRpc() for client %sClient %s does not have rights to access the specified service on the IP host %sClient %s tried to repeat connect() on an IP socketClient %s tried to connect IP socket in improper stateMemory allocation failure while connecting IP socket, connection failedFailed (%d, %d) to connect to IP address %s for client %sAttempting to connect to IP address %s for client %sMemory allocation failure, new IP data channel for client %s abortedExecuting connectRdyProc() for client %sconnectRdyProc() failed because IP socket in improper state (%d)connectRdyProc() failed because pending message pointer was NULLFailed (%d) to connect to IP address %s for client %sSuccessfully connected to IP address %s for client %sExecuting listenRpc() for client %sClient %s tried to listen() on IP socket in improper stateFailed to do listen() for client %sExecuting listenRdyProc() for client %sFailed to open new IPX socket for client %s during listen() eventFailed to setsockopt() new IPX socket for client %s during listen() eventFailed to bind() new IPX socket for client %s during listen() eventFailed (%d, %d) to initiate connect to client address %s during listen() eventExecuting acceptRpc() for client %sClient %s tried to accept() on IP socket in improper stateMemory allocation failure, accept() request failedMaximum number of IP sockets reached (%d), accept() request failedFailed to do accept() for client %sNew IP socket accept()ed for client %s could not be set for inline OOB dataFailed to connect to client address %s, accept() request failedAccept()ed connection request from IP address %s for client %sExecuting setsockoptRpc() for client %sClient %s tried to perform setsockopt() on closed IP socketAn unknown setsockopt option (%d) was sent from the client (%s)Executing getsockoptRpc() for client %sAn unknown getsockopt option (%d) was sent from the client (%s)Executing getsocknameRpc() for client %sClient %s tried to perform getsockname() on closed IP socketgetsockname() requested by client %s failedgetsocknameRpc() for client %s is returning an unbound IP address: %sExecuting getpeernameRpc() for client %sThe socket call getpeername sent from the client (%s) failedExecuting shutdownRpc() for client %sClient %s tried to shutdown IP socket in improper stateAn invalid shutdown type (%d) was sent from the client (%s)Executing closesocketRpc() for client %sclosesocket() called for invalid socket %d:%d by client %sclosesocket() called a second time for socket %d:%d by client %sclosesocket() closing socket %d:%d for client %sclosesocket() RPC response sent to client %s for socket %d:%dclosesocket() for client %s of socket %d:%d failed, out of memoryExecuting gethostnameRpc() for client %sThe socket call gethostname sent from the client (%s) failedExecuting gethostbynameRpc() for client %sThe socket call gethostbyname sent from the client (%s) failedExecuting gethostbyaddrRpc() for client %sThe socket call gethostbyaddr sent from the client (%s) failedExecuting getprotobynameRpc() for client %sThe socket call getprotobyname sent from the client (%s) failedExecuting getprotobynumberRpc() for client %sExecuting getservbynameRpc() for client %sThe socket call getservbyname sent from the client (%s) failedExecuting getservbyportRpc() for client %sExecuting pingRpc() for client %sInvalid client command message (type %d), communication with client %s abortedProcessing command channel event (%d), for client %sCommand channel for client %s closed normallyInvalid client command message (too large), communication with client %s abortedInvalid client command message (too small), communication with client %s abortedError (%d) on command channel, communication with client %s abortedInvalid command channel event (%d), communication with client %s abortedProcessing IP data channel event (%d), for client %sInvalid IP data channel event (%d), discardedMessage processing thread woken up, but message queue emptyCommand/event message ignored, communication with client about to be abortedmsgProc entered: msg_ptr=0x%x msg type=%dInvalid message (class %d) found in receive queueCommand/event message is being processedSend call failed. Errno: %sRecv call failed. Errno: %sRecv call returned 0. Sending Shutdown.The OOB byte %c was received.Thread spawning failure, The IP/IPX Gateway will try to continue to run!Pending data transfer queue is empty but count is %s(IPtoClient) The ipEventFlag is set to %d (IPtoClient) The cliEventFlag is set to %d ### Relayed FIN packet to Client side! (ClienttoIP) The ipEventFlag is set to %d (ClienttoIP) The cliEventFlag is set to %d ### Relayed FIN packet to IP side! Starting regular IP_COMM thread Unable to allocate memory for performing data transfer.Exiting IPCommThread # %d Remaining Threads: %dSelect failed and endpoint was gone (sockID): %d-%d% for thread %dStarting Dynamic IP_COMM thread gw_info.logMessageErrorWarningInfoCritical DebugDebugBogusNovell IPX/IP Gateway %s wt%s %s-%d: Could not open log message file Novell IPX/IP Gateway Log File %s %s %s-%d: Could not write to log message file atGateway Server Name: %s %s %s-%d: From file %s at line %d%s %s %s-%d:%s %s:: %s %s-%d:%s %s:: %s-%d:%s %s %s-%d:gw_audit.logUnable to close the log file (%s). %s Unable to open or create the log file: %sCN=tcpport %dUnable to open the log file: %s Reason: %s%s: %s, connected to, %s, on, %s %s: %s, disconnecting from, %s, on, %s %s: %s, accepted a connection from, %s, on, %s sendtoUnable to send %d byte packet for a ping call. Error code: %d.Ping call to host %s failed. Host is unknown.Unable to allocate memory for performing a ping to an IP host.icmpUnable to open ICMP socket for a ping call. Error code: %d.Unable to receive data for a ping call. Error code: %d.Received close socket while trying to perform a ping call.Ping call returned: %s is alive.Ping host: %s. Host does not respond. %u packets were sentChecking username (%s) against connection table entry for %s Found client in server connection table. Client not found with NWDSMapNameToID(), (%d). Checking AC info for the object %s. NWDSOpenStream returned: %d Found AC struct type: %d start(%d) end(%d) Adding an AC Struct to the RPC. Memory allocation failureLooking for Group Memberships for user: %s. Client %s is not logged into the same NDS tree. Gateway access control is turned on, so access has been denied.Unable to read the NDS Access Control information for the user object %sUnable to read the group objects associated with the NDS user object %sUnable to read the NDS Access Control information for the NDS container %sTIME start (%d), end (%d), current (%d) %H-------Checking Access Control-------- General Access entry found Specific service (%d), current port (%d) Specific Service match found Specific addr (%s), current addr (%s) Specific Address match found Applying General Service (no specific found)