Help Contents
ICL EtherTeam16 Network Card Setup

Use this dialog box to configure settings for ICL EtherTeam16 adapter card.

For more information choose one of the following topics.

Select I/O Base Address

Select Interrupt Number

Select Transceiver


I/O Base Address

Select the I/O Base Address according to the jumpering of the adapter. The default AUTO means that the adapter is searched from the possible I/O Base Addresses.

NOTE!  The I/O Base Address can be defined as AUTO although several adapters are installed. In this case adapter instances are searched and allocated in the following order:

   0300,  0310, 0320, 0290

NOTE!  In case of several adapters installed, do not use any "mixed" definitions for the I/O Base Addresses. Either define them all explicitly or leave them AUTO.


Interrupt Number

The Interrupt Number is SW selectable and can be selected from any one of the possibilities (which is not used by any other HW).


Transceiver

The explicit values BNC, DIX(AUI) or TP mean that the corresponding transceiver is used.

NOTE!  The transceiver must be given explicitly, there is no AUTO mode for the EtherTeam16 NT Driver.