                                                                  DEC  1994

                 SCO UNIX V.3 (TCP/IP V1.2X) Driver Installation
			               for
	                   DE-650 PCMCIA Ethernet Card
	        =================================================

* Installation for multi-cards *
This installation is for DE-650 multi-cards driver of SCO UNIX (Runtime v3.2.4x)
with TCP/IP v.1.2x .

  1). It is allowed to install 2 NICs.

  2). Support gateway function. ( routing function )

  3). Statistic function is added when the following command is executed:
      # netstat -i

  Name	 Mtu   Network	 Address   Ipkts  Ierrs Opkts	Oerrs Collis

  d65e0  1500  192.9.201 unix4	   423	   0	 423	 0     0
  d10e0  1500  192.9.200 unix2	   423	   0	 423	 0     0
  d22e0  1500  15	 unix3	   423	   0	 423	 0     0
  d40e0  1500  170.23	 unix1	   15322   0	 552	 0     0
  d20e0  1500  168.8	 unix	   556	   0	 890	 0     0
  lo0	 2048  170.23	 localhost 180	   0	 180	 0     0


*********************
* Install Procedure *
*********************

The following files will be used in this installation:

Files	       Contents
----------     -----------------------------------------
driver.o       DE-650 Driver Program.
setup65n       DE-650 software setup program.
dlist	       Used by netconfig.
d65e	       Used by netconfig.
info	       Used by netconfig.
init	       Used by netconfig.
master	       Used by netconfig.
node	       Used by netconfig.
reconf	       Used by netconfig.
remove	       Used by netconfig.
space.c        Used by netconfig.
system	       Used by netconfig. 


0. In DOS environment prepared diskette for setup65n :
   Insert D-Link DE-650 Series Driver Programs in A: drive.
   Insert a blank diskette in B: drive. ( for D-Link SCO UNIX driver)
   Copy D-Link SCO UNIX Driver into root directory of blank diskette.

	C> copy A:\ibmpc\scounix\tcpip1.2x\*.*  B:\

1. Login as root user. (On maintenance mode)
  
2. Install TCP/IP software through the custom utility.

	# custom

	Select Install
	Select A New Product
	Select entire to install all of the packages

3.  The installation Diskette should be DOS format.
    Put D-Link SCO UNIX Driver diskette(in step 0 prepared) to floppy A: and use
    doscp command to copy D-Link SCO UNIX Driver into UNIX's directories.

	# cd /
	# doscp A:/setup65n /setup65n

	# chmod +x /setup65n

	# ./setup65n

4. # netconfig
   Available options:

       1. Add a chain
       2. Remove a chain
       3. Reconfigure an element in a chain
       q. Quit						
     Select option:                   	                Select 1. Add a chain   

5. Select top level of chain to Add or q to quit:	Select 1. sco_tcp
							(SCO TCP/IP for UNIX)

6. Select next level of chain to Add or q to quit:	Select d65e0  (D-Link
                                                        DE-650CT Ethernet
                                                        Driver unit 0)

7. Add chain sco_tcp ->d65e0 (y/n):			            Type 'y'

   ***************************************************
   *Note:					     *
   *   Add chain sco_tcp  -> d65e0 unit 0 (y/n)      *
   *			 :			     *
   *   Add chain sco_tcp  -> d65e2 unit 2 (y/n)      *
   *   It depends on card number.		     *
   ***************************************************

   Installing the de65e driver into the link kit 
   .Enter IRQ (3,4,5,9,10,11,15) [5] or 'q' to quit:               Type value
   .Enter I/O base address (300..360) [300] or 'q' to quit:        Type value
   .Enter RAM base address (c0000..ec000) [d0000] or 'q' to quit:  Type value
   .Enter PCMCIA Slot Number (0,1) [0] or 'q' to quit:             Type value

8. Enter the internet address of this interface:         	   Type n.n.n.n

9. Enter the netmask for this interface (default: 255.255.0.0)     Enter key

10. Does the interface use a broadcast address of all 1's? (y/n) (default : y):                    
                                                                   Type 'y'

11. Enter the boardcast address for this interface (default: n.n.n.n):
                                                                   Enter key.

12. Are these values correct? (y/n):       			   Type 'y'

13. Configure gateway? (y/n/q)                                     Type 'y'
    XX Pseudo ttys are currently configured, do you want to:

       1. Add Pseudo ttys
       2. Remove Pseudo ttys
       
    Select an option or enter q to quit [q]:		           Type 'q'

14. Available options:

       1. Add a chain
       2. Remove a chain
       3. Reconfigure a element in a chain
       q. Quit
     Select option: 					Select option: q

15. Do you want to relink to kernel now?		           Type 'y'

16. Do you want this kernel to boot by default? (y/n)	           Type 'y'

17. Do you want the kernel environment rebuilt? (y/n)	           Type 'y'

18. Reboot Unix.

	# shutdown -y -g0 -i6