**** Edit commen/help

_C1_04,72,11,0,0,0
*This programming sets up the day to night change over time.
 HH(Hour)  :00 to 23
 MM(Minute):00 to 59
*The ERROR CODE E06 will be made if the day to night change over time
 (1-04) is set to the same as the night to day change over(1-05).
 But,if set 00-00 to both time,this feature is not serviced.
*Additional programming.
   1-05:Day mode change over(Auto)
   3-05:Line select D/N change over_

_C1_05,72,11,0,0,0
*This programming sets up the night to day change over time.
 HH(Hour)  :00 to 23
 MM(Minute):00 to 59
*The ERROR CODE E06 will be made if the night to day change over time
 (1-05) is set to the same as the day to night change over(1-04).
 But,if set 00-00 to both time,this feature is not serviced.
*Additional programming.
   1-04:Night mode change over(Auto)
   3-05:Line select D/N change over_

_C1_06,58,12,0,20,5
*This programming sets up the number of digits required
 for extension numbers starting with that initial digit
 (1,2 or3).
*P means the first digit of Extension intercom number.
 D means the number of digits required for
 Extension number.
*Additional programming.
   2-02:Extension number
   4-02:Pilot number setup
*Making reference to [f.6] button._

_H1_06,70,4,0,5,18
*Error Code E06 Select number of digit for extension number are not
 corresponded with the extension numbers._

_C1_10,35,6,0,0,0
*This programming determines
 make ratio for dial pulse line.
  0:33% Make ratio
  1:39% Make ratio_

_C1_11,41,11,0,20,5
*This programming sets up the
 day to night change over time.
  HH(Hour)  :00 to 23
  MM(Minute):00 to 59
*Additional programming.
   1-12:PBX day mode auto change over
   3-02:Circuit type
   3-07:PBX night mode transfer
*Making reference to [f.6] button._

_H1_11,40,6,0,20,17
*Error Code E06
 The day to night change over time
 for PBX night transfer is equal to
 that of night to day change over._

_C1_12,43,11,0,20,5
*This programming sets up the
 night to day change over time.
  HH(Hour)  :00 to 23
  MM(Minute):00 to 59
*Additional programming.
   1-11:PBX night mode auto change over
   3-02:Circuit type)and
   3-07:PBX night mode transfer
*Making reference to [f.6] button._

_H1_12,40,6,0,20,17
*Error Code E06
 The day to night change over time
 for PBX night transfer is equal to
 that of night to day change over._

_C1_50,28,7,0,0,0
*This programming sets up
 installation date.
  YY(Year) :00 to 99
  MM(Month):01 to 12
  DD(Day)  :01 to 31_

_C1_51,31,7,0,0,0
*This programming sets up
 Error record starting date.
  YY(Year) :00 to 99
  MM(Month):01 to 12
  DD(Day)  :01 to 31_

_C1_53,38,19,0,80,4
*This programming indicates the
 total number and the date that
 the following error occurred.
  Power on, System lock-up, Trouble
  on optional unit, Trouble on
  terminal.
Counter   :001 to 120
YY(Year)  :00 to  99
MM(Month) :01 to  12
DD(Day)   :01 to  31
hh(Hour)  :01 to  23
mm(Minute):00 to  59
N:1=The time of power-on
  2=The time of System Locked-up
  3=Trouble on optional unit
  4=Trouble on terminal
P=Parameter:Slot number/TEN number_

_C1_54,58,5,0,15,17
*This programming indicates type and location(slot No.)
 of option unit installed.
  Slot No.=1 to 24_

_C1_55,80,7,0,80,17
*This programming indicate the status of terminalinstalled. The meaning of
 STATUS No. are as follows.      01:Idle or not installed  08:B-ch busy
  11:ICM dailing 12:ICM calling 13:ICM talking 14:ICM on hold 15:Programming
  16:Activating paging  17:Activating Camp-on  18:Receiving B tone
  19:Activating series call  21:C/O dialing  23:C/O talking_

_C1_56,71,6,0,5,17
*This programming indicates the station slot number that each TEN is
 installed and the number of B channel that each TEN is using.
  SL=Slot No.:1240(1 to 4) 2470(1 to 7) 36100(1 to 10)
  CH=B-channel No.:(1 to 8)_

_C1_76,71,6,0,5,17
*This programming indicates the station slot number that each TEN is
 installed and TEI number for each TEN.
  SL=Slot No.:1240(1 to 4) 2470(1 to 7) 36100(1 to 10)
  TE=TEI No.:(1 to 11,0=unused)_

_C1_77,21,11,0,80,5
*This programming
 indicates TEN No.
 corresponding to
 each Slot No. and
 TEI No.
Slot No.:(1 to 10)
TEI  No.:(1 to 11)
 TEN No.00=unused
 {t}_

_C2_01,78,8,0,80,16
*This programming assigns the terminal type for each   {t}
TT means Terminal Type.
 00:Unused  02:12 Key Tel.Dot Display  03:Single Line Tel.(DP Dial)
 04:Single Line Tel.(DTMF Dial) 05:DSS Console 06:DLS Console 07:PC 08:DSAP
 11:12 Key Tel.Standard  14:24 Key Tel.Standard  18:24 Key Tel.Dot Display
*Making reference to [f.6] button._

_H2_01,38,13,0,80,10
*Error Code E01
 The station port changed system
 data for terminal type is in use.
*Error Code E03
 DSS/DLS consoles accommodeted in a
 system are over the maximum
 accommodation quantity.
*Error Code E05
 TEN01 is not assigned to a display
 equipped Key TEL or a PC adaptor
 connected with Personal Computer._

_C2_02,68,7,0,10,17
*This programming assigns the function type to each TEN number.
*Additional programming.
   1-06:Extension number digits   4-02:Pilot number setup
*When erasing an extension number, push "DEL" button.
*Making reference to [f.6] button._

_H2_02,62,6,0,10,17
*Error Code E04
 There are two or more same extension numbers in a system.
*Error Code E06
 An extension number is set for the DSS/DLS console._

_C2_03,41,20,0,80,3
*This programming assigns the function
 type to each line key button for each
 TEN.
FUNC.TYPE           PARAMETER
0:Unused               0
1:Individual       (Line No.1 to 36)
  trk key
2:Loop selection   (Line No.1 to 36)
  trk key-1line
3:Loop selection   (SK group No.1
  trk key-group               to 64)
4:Park hold key    (PH group No.1
                              to 255)
5:DSS key w/       (TEN No.for the
  busy lamp         other Extension)
6:DSS key w/out    (TEN No.for the
  busy lamp         other Extension)
*Making reference to [f.6] button._

_H2_03,39,20,0,80,3
*Additional programming.
   5-01:Line assignments
*Error Code E02
Line keys definition between the
Secretary TEL and Executive TEL are
not corresponding.
*Error Code E04
In line key definition,
1)Same line is assigned to two or
  more line keys.
2)Two or more loop selection keys.
3)The same station is assigned to
  two or more hot-line keys.
*Error Code E05
In the line key definition,Data of
key definition are not set on "0"
(unused) for DSS/DLS consoles and
analog terminals._

_C2_04,80,7,0,80,17
*This programming sets up class of service for each TEN No. which can be made
 for day and night mode seperately
D is assigned to Class of service in the daytime,and
N is assigned to Class of service in the nighttime.
*Making reference to [f.6] button._

_H2_04,80,12,0,80,15
*D or N
 0:Class 0   1:Class 1   2:Class 2   3:Class 3
 4:Class 4   5:Class 5   6:Class 6
*Additional programming.
 7-70:Local call digits for Class-2/3. 7-71:Restricted maximum dial digits.
 7-74:COS restriction on speed dial.   7-77:Permit code table for Class-2.
 7-78:Permit code table for Class-3.   7-79:Permit code table for Class-4.
 7-80:International call permit code.  7-81:Deny code table.
 7-85:Emergency code overrides.        7-86:International call access number.
 7-89:DTMF transmission._


_C2_05,70,7,0,80,17
*This programming assigns the TEN No. that can initiate speed dial.
D is assigned to speed dial permit in the daytime, and
N is assigned to speed dial permit in the nighttime.
D or N
 0:Not permitted  1:Permitted_

_C2_06,32,16,0,80,5
*This programming sets up
 CO line restriction for
 each TEN No.
D is assigned to CO line
 restriction in the daytime,
N is assigned to CO line
 restriction in the
 nightmode.
D or N
 0:No restriction
 1:Outgoing call restriction
 2:Incoming call restriction
 3:Outgoing and Incoming call
   restriction_

_C2_07,80,6,0,80,17
*This programming assigns priority line for outgoing automatic trunk access.
*Additional programming.
   2-08:Outgoing CO auto seizure
   8-02:Idle trunk off-hook access._

_C2_08,40,14,0,80,5
*This programming sets up the lines
 which are available for out going
 automatic trunk access at each TEN
 No.
{t}
  0:Disable
  1:Enable
*Additional programming.
   2-07:Outgoing line access priority
   8-02:Idle trunk off-hook access
   8-31:Call origination access
        priority_

_C2_09,41,11,0,80,5
*This programming sets up the lines
 which are available for automatic
 incoming call answer at each TEN No.
{t}
 0:Disablle
 1:Enable
*Additional programming.
   8-03:Incoming call off-hook access
   8-32:Incoming call access priority_

_C2_10,68,6,0,80,17
*This programming assigns the TEN No. to the executive extension.
  0:Not assigned to executive extension
  1:Assigned to executive extension
*Making reference to [f.6] button._

_H2_10,73,15,0,80,4
*An executive extension should be enabled for DND
 (Service No.(8-16:DND on intercom) and (8-17:DND on trunk)).
*Executive and secretary  extension pairs should both be allocated
 the same incoming trunk access(Service No.(3-03:Ringing station-day),
 (3-04 :Ringing station-night)).
*A hot line key must be allocated for direct intercom calls between
 the Executive and secretary extensions(Service No.(2-03:Line Key
 Definition)).
*Additional programming.
  2-03:Line key definition
  2-11:Secretary set assignment
*Error Code E05
 The executive telephone is not key telephone._

_C2_11,79,6,0,0,18
*This programming assigns secretary extension corresponding to the executive
 extension. Up to two secretary extensions can be assigned to one executive
 extension(* is marked after TEN No.of executive extension).
*Making reference to [f.6] button._

_H2_11,38,21,0,80,5
*Error Code E02
 The secrtary station serving
 executive station is undefined.
*Error code E03
 One Secretary telephone serves
 four or more executive telephones.
*Error Code E04
 The same station is assigned to
 first and second station for
 secretary key tel.
*Error Code E05
 The secretary telephone is not key
 telephone.
*Error Code E06
 A certain key telephone serves
 both the executive and secretary.
*Additional programming.
   2-03:Line key definition
   2-10:Executive set asignment_

_C2_12,72,4,0,80,18
*This programming assigns the extension that is associated with a PC.
*Making reference to [f.6] button._

_H2_12,70,5,0,80,18
*Error Code E05
 The TEN associated with PC adaptor is not key telephone or other
 type of terminal is registered in the data of TEN for PC adaptor._

_C2_13,57,20,0,80,4
*This programming assigns the Extension associated
 with DSS/DLS consoles(Max.3 DSS/DLS).
  F means First TEN No.
  S means Second TEN No.
  T means Third TEN No.
*A DSS/DLS console cannot be assigned more than 2
 Extensions
<EX.>  DSS/DLS   KT TEN No.
       No.(TEN)- F -- S -- T
        01(010)-005--000--000
        02(011)-000--005--000
        03(012)-000--000--005
i.e. Console No.01(TEN No.010) is assigned to KT TEN
No.005 as First Console, and Console No.02(TEN No.011)
is assigned to KT TEN No.005 as Second Console, and
Console No.03(TEN No.012) is assigned to KT TEN No.005
as Third Console.
*Making reference to [f.6] button._

_H2_13,75,7,0,3,17
*Error Code E04
 The same DSS/DLS console is related to two or more key telephones.
*Error Code E05
 The TEN associated with DSS/DLS console is not key telephone or other
 type of terminal is registered in the data of TEN for DSS/DLS console._

_C2_16,80,7,0,80,17
*This programming assigns held line answer restriction for each line of TEN#.
*Seperate assignment is available for day and night mode.  {l}
D is assigned to Held line answer restriction in the daytime.
N is assigned to Held line answer restriction in the nighttime.
  0:Not restricted  1:Restricted_

_C2_17,78,5,0,80,19
*This programming assigns Extension TEN No. to each DSS key on DSS console.
 DSS No.:01 to 12
*Making reference to [f.6] button._

_H2_17,62,9,0,80,4
*Additional programming.
   2-01:Terminal Type
   2-02:Extension number
   2-03:Line Key Definition
   2-13:DSS/DLS associated Tel set
*Error Code E04
Two or more identical TENs are used for DSS key assignment._

_C2_18,80,5,0,80,19
*This programming assigns the function type to each DLS key on DLS console.
 DLS No.:01 to 12
*Making reference to [f.6] button._

_H2_18,39,14,0,80,5
FUNC.TYPE           PARAMETER
0:Unused               0
1:Individual       (Line No.1 to 36)
  trunk key
2:DSS key w/       (TEN No.for the
  busy lamp         other Extension)
*Error Code E04
In line key definition,
1)Same line is assigned to two or
  more line keys.
2)The same station is assigned to
  two or more hot-line keys._

_C3_01,33,12,0,80,5
*This programming defines line
 type of each CO line.
Line type
 00:unused
 01:DP(20pps)
 02:DP(10pps)
 03:DTMF
 04:Tandem trunk
*Making reference to [f.6]
 button._

_H3_01,54,5,0,10,18
*Error Code E05
 The type of the dial signal for a line assigned to
 the voice mail is not set on DTMF._

_C3_02,38,12,0,80,5
*This programming defines circuit
 type of each CO line.
  0:CO line
  1:PBX line
*Assitional programming.
   7-54:PBX access codes
*Error Code E05
The type of a line assigned to the
voice mail is not set on the
 ordinary CO line._

_C3_03,62,5,0,80,18
*This programming assigns ringing extension in the daytime.
{l}
 0:No ringing  1:Ringing_

_C3_04,64,5,0,80,18
*This programming assigns ringing extension in the nighttime.
{l}
 0:No ringing  1:Ringing_

_C3_05,32,9,0,80,5
*This programming assigns
 the lines to Day/Night
 change over by either manual
 or automatic.
{l}
 0:Manual change over
 1:Auto change over_

_C3_06,36,13,0,80,5
*This programming assigns the
 extension that can set up Day/
 Night change over on per line
 basis.
{l}
 F:TEN No. for first extension
 S:TEN No. for second  extension
*Up to two extensions are
 available for each line.
*Making reference to [f.6]
 button._

_H3_06,39,10,0,80,12
*Error Code E02
 Day/Night mode setup key tel for
 lines assigned to manual switch
 over is undefined.
*Error Code E05
 Day/Night mode setup key tel is not
 assigned to a key tel or PC adaptor
 connected with Personal Computer._

_C3_07,36,18,0,80,5
*This programming assigns the PBX
 line to have PBX night mode
 transfered.
  0:Disable
  1:Enable
*In the night mode on PBX line,
 trunk access code will not be
 sent automatically when
 initiates speed dial.
*Additional programming.
   1-11:PBX night mode auto
        change over
   1-12:PBX day mode auto
        change over
   3-02:Circuit type
   7-54:PBX access codes_

_C3_08,30,7,0,80,5
{l}
Assigning each line to TEN
 number of connected PF
 telephone when power
 failure._

_C3_09,38,6,0,80,5
*This programming assigns answering
 condition to each CO line.
 0:Reversing
 1:Time out_

_C3_10,36,9,0,80,5
*This programming allocates lines
 in up to 9 groups.
  0:Unassigned
  1 to 9:Group 1 to 9
*Single line telephone uses this
 trunk access group number for
 outgoing call(81 to 89)._

_C3_20,38,6,0,80,5
*This programming assigns either
 Flashing or Grounding to each line
  0:Flashing
  1:Grounding_

_C4_01,80,7,0,80,17
*This programming allocates the extension in up to 20 groups.An extension can
 not be set for two or more groups. Don't assign DSS/DLS console into any
 group.     Group No.=01 to 20
    0:Not assigned  1:Assigned
*Making reference to [f.6] button._

_H4_01,68,9,0,20,14
*Additional programming.
  4-02:Pilot number setup
  4-06:Alternate answering
*Error Code E04
The same key telephone is set for two or more station groups.
*Error Code E05
The DSS/DLS consoles are set in the key telephone groups._

_C4_02,41,17,0,80,5
*This programming assigns Pilot Number
 to each station group so that the
 calls placed using Pilot Number can
 be answered by the first idle
 extension within the group.
*Group No.=01 to 20
 Assign the Pilot number
*Additional programming.
   1-06:Extension number digits
   2-02:Extension number
   4-01:Station groupings
*When erasing a pilot number,
 push "DEL" button
*Making reference to [f.6]
 button._

_H4_02,57,4,0,20,17
*Error E04
There are two or more same pilot numbers in a system._

_C4_06,40,15,0,80,5
*This programming assigns the station
 group so that any station in each
 group can pick up any calls placed
 to the programmed station group.
Group No.=01 to 20
 0:Not assigned
 1:Assigned
*Up to 20 station groups can be
 programmed and the code #1 through
 #6 can be corresponded to the first
 6 other station group.
*Additional programming.
   4-01:Station grouping_

_C5_01,36,10,0,80,5
*This programming allocates lines
 in up to 64 Loop Selection trunk
 groups.
Group No.=01 to 64
  0:Unassigned
  1:Assigned
*Additional programming
   2-03:Line key definition_

_C6_01,63,4,0,0,0
*This programming determines when call duration time starts.
 Timer is available 1 to 255 seconds._

_C6_02,50,16,0,80,5
*This programming selects Account Code Entry.
*Data
 0:Account Code can be setup anytime during
   dialing the telephone number.
 1:Account code with the table programmed by
   (6-15:Forced Account Code) must be entered
   before dialing the telephone number.
 2:Any account code without the table
   programmed by (6-15:Forced Account Code)
   must be entered before dialing the telephone
   number
*Additional programming.
   6-12:Account code
   6-15:Forced Account Code_

_C6_03,50,6,0,0,0
*This programming determines whether prints the
 incoming calls data on SMDR.
 0:Print out all incoming call
 1:Print out when Account Code has been set_

_C6_04,51,6,0,0,0
*This programming determines whether prints call
 data restricted on SMDR.
 0:Print out
 1:Not Print out_

_C6_05,50,6,0,0,0
*This programming determines whether prints the
 dial number for outgoing call.
 0:Print out all digits
 1:Number of last two digits are masked_

_C6_06,50,6,0,0,0
*This programming determines whether prints PBX
 call data on SMDR.
 0:Print out
 1:Not Print out_

_C6_07,52,7,0,0,0
*This programming determines Date format on SMDR.
 0:Month/Day/Year
 1:Year/Month/Day
 2:Day/Month/Year
 3:Year/Day/Month_

_C6_08,49,7,0,0,0
*This programming specifies the minimum number
 of dialed digit to print on SMDR.
   0:Print out all
   1 to 9:Only print out the dialed number
          within select number of digits_

_C6_09,47,7,0,0,0
*This programming specifies the minimum call
 duration time to print on SMDR.
   0:Print out all
   1 to 255:Only print out if call is
            over the selected time_

_C6_10,50,6,0,20,17
*This programming determines whether prints the
 TEN number on SMDR.
  0:Not print out
  1:Print out_

_C6_11,50,6,0,80,5
*This programming determines whether prints the
 line number on SMDR.
  0:Not print out 
  1:Print out_

_C6_12,52,8,0,0,0
*This programming determines whether account code
 is available.
  0:Disable
  1:Enable
*Additional programming.
   6-02:Account code entry_

_C6_13,52,6,0,0,0
*This programming determines whether account code
 entry is available on redial.
  0:Disable
  1:Enable_

_C6_14,52,6,0,0,0
*This programming determines whether account code
 is available for single line station.
  0:Disable
  1:Enable_

_C6_15,63,5,0,10,17
*This programming assigns the table for forced account code.
  Table No.:001 to 200
  Account code :max.8 digits_

_C6_19,46,8,0,0,0
*This programming provides the selection
 of the data out put speed for the printer.
1: 300bps Non parity     2: 300bps parity
3:1200bps Non parity     4:1200bps parity
5:2400bps Non parity     6:2400bps parity
7:4800bps Non parity     8:4800bps parity_

_C7_01,69,8,0,0,0
*This programming determines whether the system allows to provide
 the service of the display of the telephone number on trunk line.
 0:Not indicated
 1:Indicated
*Additional programming.
   9-01:Line number indication_

_C7_02,68,6,0,0,0
*This programming determines whether the system allows to provide
 handsfree answer on intercom.
 0:Disable Handsfree answer
 1:Enable Handsfree answer_

_C7_03,57,6,0,0,0
*This programming determines whether the system allows
 Conference Call.
 0:Disable Conferece call
 1:Enable Conferece call_

_C7_04,57,6,0,0,0
*This programming determines whether the system allows
 Series CAll.
 0:Disable Series call
 1:Enable Series call_

_C7_05,57,6,0,0,0
*This programming determines whether the system allows
 Message Waiting.
 0:Disable Message waiting
 1:Enable Message waiting_

_C7_07,57,7,0,0,0
*This programming determines whether the system allows
 to put a line on exclusive hold when press the ICM
 key while on a line.
 0:Disable Exclusive hold
 1:Enable Exclusive hold_

_C7_08,57,6,0,0,0
*This programming determines whether the system allows
 the telephone set up COS 1 to dial DTMF signal.
 0:Disable DTMF transmission for class-1
 1:Enable DTMF transmission for class-1_

_C7_09,57,6,0,0,0
*This programming determines whether the system allows
 the telephone set up COS 2 to dial DTMF signal.
 0:Disable DTMF transmission for class-2
 1:Enable DTMF transmission for class-2_

_C7_10,60,6,0,0,0
*This programming determines whether the system allows
 the telephone set up COS 3 to COS 6 to dial DTMF signal.
 0:Disable DTMF transmission for class-3 to 6
 1:Enable DTMF transmission for class-3 to 6_

_C7_11,57,6,0,0,0
*This programming determines whether the system allows
 all call paging when dials 90 while on intercom.
 0:Disable All call paging
 1:Enable All call paging_

_C7_12,60,9,0,0,0
*This programming provides the selection of Line Camp-on
 or Hold free transfer when presses the busy CO line key.
 0:Null
 1:Line camp-on
 2:Hold-free transfer
*Additional programming.
   9-08:Camp-on permission_

_C7_13,57,6,0,0,0
*This programming determines whether the system allows
 PC communication with the Display telephone.
 0:Disable composite communication
 1:Enable composite communication_

_C7_17,58,6,0,0,0
*This programming determines whether the system enables
 the intercom Camp-on / Call back.
  0:Disable Station Camp-on
  1:Enable Station Camp-on_

_C7_18,50,6,0,0,0
*This programming determines whether the system
 enables Step call.
 0:Disable Step call
 1:Enable Step call_

_C7_20,50,6,0,0,0
*This programming determines whether the system
 enables Preset call.
 0:Disable Preset call
 1:Enable Preset call_

_C7_22,70,6,0,0,0
*This programming determines whether the chime tone is available on
 the external paging.
 0:Disable Extension page chime
 1:Enable Extension page chime_

_C7_24,66,6,0,0,0
*This programming determines whether the system enables Meet me
 paging(All call page answer back).
 0:Disable All call page answer back
 1:Enable All call page answer back_

_C7_25,50,6,0,0,0
*This programming determines whether the system
 enables Room monitor.
 0:Disable Room monitor
 1:Enable Room monitor_

_C7_26,50,11,0,0,0
*This programming determines whether the system
 accomodates the door chime box. Up to two door
 chime boxs are available.
  0:Not provided
  1:Provided
*Additional programming.
   7-37:Door phone chime duration
   7-38:Door phone chime termination timer
  10-04:Door phone ringing station assignment_ 

_C7_27,50,6,0,0,0
*This programming determines whether the system
 accomodates the door unlock.
  0:Not provided
  1:Provided_

_C7_29,71,9,0,0,0
*This programming determines whether the system allows the telephone
 associated with DSS/DLS console to place the CO line seized on hold
 when presses the another CO line.
 0:Disable Trunk reslection
 1:Enable Trunk reslection
*Additional programming.
   2-13:DSS/DLS Associated Tel Set_

_C7_30,47,9,0,0,0
*This programming determines when the system
 recalls the telephone initiating the hold.
 0:No feature
 1 to 255:(1 to 255)x10sec
*Additional programming.
   7-31:Hold line termination timer
   7-91:Hold alarm timer_

_C7_31,52,9,0,0,0
*This programming determines when the system
 cut the held line off due to no-retrieve a call.
 0:No feature
 1 to 255:(1 to 255)x10sec
*Additional programming.
   7-30:Hold alarm timer
   7-91:Hold alarm timer duration_

_C7_32,55,8,0,0,0
*This programming determines when the system emittes
 the alarm signal for unanswered incoming call.
 0:No feature
 1 to 255:(1 to 255)x10sec.
*Additional programming.
   8-07:Incoming unanswered alarm_

_C7_33,44,7,0,0,0
*This programming specifes the period for
 long-cycle ringing.
  1 to 255:(1 to 255)sec.
*Additional programming.
   8-35:Long cycle ringing_

_C7_34,44,5,0,0,0
*This programming determines how long the
 clock alarm lasts.
 1 to 255:(1 to 255)sec._

_C7_35,67,11,0,0,0
*This programming determines when the system emittes the long
 conversation warning tone and is to set the timer for minutes.
  0 to 255:(0 to 255)min.
*The system emittes the warning tone when the conversation
 elapses long enough to over the timer set by 7-35 plus 7-36.
 The system emittes warning tone every three minutes after that.
*Additional programming.
   7-36:Long conversation warning initial start timer
   8-09:Long conversation warning_

_C7_36,65,8,0,0,0
*This programming determines when the system emittes the long
 conversation warning tone and is to set the timer for second.
   0 to 255:(0 to 255)sec.
*Additional programming.
   7-35:Long conversation warning tone start
   8-09:Long conversation warning_

_C7_37,55,9,0,0,0
*This programming determines how long the door phone
 chime tone lasts.
   1 to 255:(1 to 255)sec.
*Additional programming.
   7-26:Door phone box
   7-38:Door phone chime termination timer
  10-04:Door phone ringing station assignment_

_C7_38,50,9,0,0,0
*This programming determines when the telephone
 is unable to answer for the doorphone call.
   0 to 255:(0 to 255)sec.
*Additional programming.
   7-26:Door phone box
   7-37:Door phone chime tone duration
  10-04:Door phone ringing station assignment_

_C7_39,47,7,0,0,0
*This programming sets up the flashing time.
   0 to 255:(0 to 255)x0.0165sec.
*Additional programing.
   3-20:Flashing/Grounding
   7-72:Flash/Function key_

_C7_40,50,8,0,0,0
*This programming sets up the time the system
 allow the telephone to seize the same
 CO line after the CO line is disconnected.
   1 to 255:(1 to 255)x0.1sec.
*Additional programming.
   7-72:Flash/Function key_
 
_C7_41,54,6,0,0,0
*This programming determines when the display mode
 for the display telephone change to the clock mode
 after hang up.
   0 to 255:(0 to 255)sec._

_C7_42,55,6,0,0,0
*This programming determines when the display mode
 for the display telephone changes from dial monitor
 to the timer mode.
   0 to 255:(0 to 255)sec._

_C7_43,64,11,0,0,0
*This programming determines when the system disconnects
 the voice message for CO line. Don't set up "0" when enables
 voice message connection on 7-60.
   0:Unlimited
   1 to 255:(1 to 255)x10sec.
*Additional programming.
   7-59:BGM source
   7-60:Voice message connection
   9-03:Trunk to trunk forward(Night)_

_C7_44,59,11,0,30,7
*This programming determines when the system disconnects
 the trunk to trunk transfered line automatically.
  0:Unlimited
  1 to 255:(1 to 255)x10sec.
*Additional programming.
   7-48:Non-sound detection forced cutoff
   8-11:Trk to Trk Xfer permission
   9-04:Trk to Trk Xfer permission
   9-05:Speech level for Trk to Trk_

_C7_45,52,8,0,0,0
*This programming determines the hooking time for
 tandem connection. Select timer of hooking pulse
 tandem connection.
  0 to 255:(0 to 255)x0.1sec.
*Additional programming.
   7-46:Hooking pulse time range_

_C7_46,57,10,0,0,0
*This programming determines the time that the system
 detects the hooking pulse time from tandem connect.
  0 to 255:(0 to 255)x0.1sec.
*The time programmed by 7-45 should not be longer than
 the time programmed here.
*Additional programming.
   7-45:Hooking pulse for tandem connect
   9-10:Hook pulse for tandem_

_C7_47,47,6,0,0,0
*This programming determines when the system
 changes  Exclusive hold to common hold.
  0:Unlimited
  1 to 255:(1 to 255)x10sec._

_C7_48,47,12,0,0,0
*This programming determines when the system
 disconnects the trk to trk transfered line
 due to non-sound detection.
  0:Unlimited
  1 to 255:(1 to 255)sec.
*Additional programming.
   7-44:Trk to Trk transfer/forward
   8-11:Trk to Trk Xfer permission
   9-04:Trk to Trk transfer permission
   9-05:Speech level for Trk to Trk_

_C7_49,47,9,0,0,0
*This programming determines when the system
 clears the message waiting indication.
 Select Message waiting clear timer.
   0:Unlimited
   1 to 255:(1 to 255)hours
*Additional programming.
   7-05:Message waiting_

_C7_50,64,15,0,80,5
*This programming creates the distinction incoming call tone.
 Up to eight incoming call tones are available.
   Registration No.:01 to 08
    P=Frequency pattern (0 to 4)
     0:Single(1freq)       1:Dual-slow(2freq)
     2:Dual-fast(2freq)    3:Tripple(3freq)
     4:Quad(4freq)
 Registration Freq.:1 to 7
   1:0.4KHz    2:0.5KHz    3:0.6KHz    4:0.8Khz
   5:1.0KHz    6:1.3KHz    7:2.0KHz
*Additional programming.
   8-33:Trunk incoming call tone
   8-34:Intercom incoming call tone(D/N))_

_C7_51,62,11,0,0,0
*This programming specifies the period of the DTMF on time.
  0:High speed(75msec on/off)
  1:Midiun speed(100msec on/off)
  2:Low speed(150msec on/off)
  3:For transmission test only
*If selects data 3 for transmission and presses the dial
 button after seized the CO line, the system continues to
 send the DTMF signal corresponding to the pressed dial
 button until the next dial button is pressed._

_C7_53,46,8,0,30,10
*This programming provides the selection of
 Restricted class dial digit.
  D=1 to 15:1 to 15 digits
  D=0:Unlimited
*Additional programming.
   2-04:Class of Service_

_C7_54,46,8,0,30,10
*This programming assigns PBX access codes.
  Assign PBX access codes:1 or 2 digits
*Additional programming.
   3-02:Circuit type
*When erasing an access code from
 the system data,push "DEL" button._

_C7_55,55,6,0,0,0
*This programming assigns the international call
 using the Mercury Line.
*Please enter "010"+"dial number".
*Maximum 10 digits can be assigned for each code._

_C7_56,60,4,0,10,18
*This programming assigns the STD code using the BT Line.
*Maximum 4 digits can be assigned for each code._

_C7_57,65,4,0,5,18
*This programming assigns the STD code using the Mercury Line.
*Maximum 4 digits can be assigned for each code._

_C7_58,50,6,0,0,0
*This programming determines whether the system
 allows the external MOH source.
  0:Not installed
  1:Installed_

_C7_59,56,12,0,0,0
*This programming determines whether the system
 enables BGM.
  0:Not installed
  1:Installed
*Additional programming.
   7-60:Voice Message connection
   7-83:BGM on external speakers_
*Error E06
 Both the background music source and voice message
 transmission device connections are enabled to use._

_C7_60,50,9,0,0,0
*This programming determines whether the system
 enables Voice Message for a CO line.
  0:Not installed
  1:Installed
*Additional programming.
   7-43:Voice Message timer
   7-59:BGM source_

_C7_65,40,4,0,0,0
Set up FAX(Facsimile) and assign Line
No.(1 to {L}) connected to FAX._

_C7_66,54,17,0,80,4
*This programming provides the selection for the
 function of voice recording unit. Select condition
 of simplified voice recording.
N is selected a condition of the features.
 N=0:No feature
 N=1:Trunk voice recording
 N=2:Extension voice recording
 N=3:In-communication/Private recording
 N=4:Station voice message
*Maximum capacties are 2 packages for each service
 feature.
*Additional programming.
   7-67:Voice recording extensions
   7-68:Private voice recording
   8-21:Station voice message permission_


_C7_67,46,7,0,0,0
*This programming assigns the telephones
 that can access extension voice recording.
 Up to two telephones can be assigned.
*Additional programming.
   7-66:Simplified voice recording_

_C7_68,46,8,0,30,10
*This programming assignd the telephones
 that can access In-communication / Private
 recording.
 Up to 16 telephones can be assigned.
*Additional programming.
   7-66:Simplified voice recording_

_C7_70,56,17,0,80,4
*This programming provides the maximum digits of
 non-restricted Local call for Class-2 and 3.
 Select the one digit(4 to 8).
*Additional programming.
   2-04:Class of Service
   7-71:Restricted maximum dial digits
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code
   7-85:Emergency code overrides
   7-86:International call access number
   7-89:DTMF transmission_
 

_C7_71,55,18,0,80,4
*This programming provides the selection of the
 maximun dial digits include the permit code(7-77,
 78,79) for Class-2 to 4.
 Select one digit(4 to 30).
*Additional programming.
   2-04:Class of Service
   7-70:Local call digits for Class-2/3
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code table
   7-85:Emergency code overrides
   7-86:International call access number
   7-89:DTMF transmission_

_C7_72,49,20,0,30,3
*This programming determines the key procedure
 for flashing and hooking.
Select a feature of Flash/Function key.

   (FCTN+FLASH)KEY  (FLASH)KEY
 0: Flashing         Hooking
 1: Hooking          Flashing
*Flashing : Access Telco "Custom
 Calling" options,Centrex features
 (if available) or PBX features
 (if installed behind a PBX).
*Hooking : Obtain a new dial tone
 on the same line(to place another
 call)without hanging up and
 starting over.
*Additional programming.
   7-39:Flashing time specification
   7-40:Line disconnect/lock up timer_

_C7_73,75,4,0,0,0
*This programming assigns the access code of BT Line and Mercury Line.
*Maximum 10 digits can be assigned for each code._

_C7_74,50,19,0,80,4
*This programming determines whether the system
 applies Class of service to speed dial.
 Select COS restriction on speed dial.
  0:Not restricted
  1:Restricted
*Additional programming.
   2-04:Class of Service
   7-70:Local call digits for Class-2/3
   7-71:Restricted maximum dial digits
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code table
   7-85:Emergency code overrides
   7-86:International call access number
   7-89:DTMF transmission_

_C7_75,68,7,0,0,0
*This programming determines what kind of customer account code
 will be send to the Mercury Line.
   1:Extension number
   2:Sequence number
   3:Not send._

_C7_76,70,8,0,80,12
*This programming provides the selection of the repeatdial pattern.
  0:Disable
  1:Call duration time = 30 sec/Interval = 3 min
  2:Call duration time = 30 sec/Interval = 1 min
  3:Call duration time = 31 sec/Interval = 30 sec
  4:Call duration time = 15 sec/Interval = 15 sec_

_C7_77,60,5,0,10,17
*This programming assigns the permit code for Class-2.
 Maximum 12 digits can be assigned for each code(01-50).
*Marking reference to [f.6] button_

_H7_77,80,9,0,80,15
*Additional programming.
 2-04:Class of service.                 7-70:Local call digits for Class-2/3
 7-71:Restricted maximum dial digits.   7-74:COS restriction on speed dial
 7-78:Permit code table for Class-3.    7-79:Permit code table for Class-4
 7-80:International call permit code.   7-81:Deny code table
 7-85:Emergency code overrides.         7-86:International call access number
 7-89:DTMF transmission._    

_C7_78,60,5,0,10,17
*This programming assigns the permit code for Class-3.
 Maximum 12 digits can be assigned for each code(01-50).
*Marking reference to [f.6] button_

_H7_78,80,9,0,80,15
*Additional programming.
 2-04:Class of service.                 7-70:Local call digits for Class-2/3
 7-71:Restricted maximum dial digits.   7-74:COS restriction on speed dial
 7-77:Permit code table for Class-2.    7-79:Permit code table for Class-4
 7-80:International call permit code.   7-81:Deny code table
 7-85:Emergency code overrides.         7-86:International call access number
 7-89:DTMF transmission._


_C7_79,60,5,0,10,17
*This programming assigns the permit code for Class-4.
 Maximum 12 digits can be assigned for each code(01-60).
*Marking reference to [f.6] button._

_H7_79,80,9,0,80,15
*Additional programming.
 2-04:Class of service.                 7-70:Local call digits for Class-2/3
 7-71:Restricted maximum dial digits.   7-74:COS restriction on speed dial
 7-77:Permit code table for Class-2.    7-78:Permit code table for Class-3
 7-80:International call permit code.   7-81:Deny code table
 7-85:Emergency code overrides.         7-86:International call access number
 7-89:DTMF transmission._

_C7_80,75,7,0,80,17
*This programming assigns the international permit code for Class-1.
 Please enter "International call access number (7-86)"+"Country code".
 Maximum 6 digits can be assigned for each code.
*When erasing the international code,push "DEL"button.
*Marking reference to [f.6] button._

_H7_80,42,14,0,35,4
*Additional programming.
  2-04:Class of service
  7-70:Local call digits for Class-2/3
  7-71:Restricted maximum dial digits
  7-74:COS restriction on speed dial
  7-77:Permit code table for Class-2
  7-78:Permit code table for Class-3
  7-79:Permit code table for Class-4
  7-81:Deny code table
  7-85:Emergency code overrides
  7-86:International call access number
  7-89:DTMF transmission_

_C7_81,59,18,0,80,4
*This programming assigns the deny code for Class-1 to
 Class-6. Maximum 12 digits can be assigned for each 
 code.
*When erasing the deny code, push "DEL"button.
*Additional programming.
   2-04:Class of service
   7-70:Local call digits for Class-2/3
   7-71:Restricted maximum dial digits
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-85:Emergency code overrides   
   7-86:International call access number
   7-89:DTMF transmission_

_C7_82,50,8,0,0,0
*This programming determines whether the system
 allows the absence message.
  0:Disable
  1:Enable
*Additional programming.
   8-28:Absence setting permit_

_C7_83,51,9,0,0,0
*This programming determines whether the system
 allows to send BGM to the external speakers.
 Select a condition of BGM on external speakers.
  0:Disable
  1:Enable
*Additional programming.
   7-59:BGM source_

_C7_84,70,5,0,5,18
Select first three digits restriced code for outgoing call.
R is assigned to restricted number(max.3 digits).
*Service No.(2-04:Class of Service) also relates to this feature._

_C7_85,49,19,0,30,4
*This programming assigns the emergency codes.
 Up to 10 codes and Maximum 4 digits for each
 code are available.
*When erasing emergency code from
 the system data,push "DEL" button.
*Additional programming.
   2-04:Class of Service
   7-70:Local call digits for Class-2/3
   7-71:Restricted maximum dial digits
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code table
   7-86:International call access number
   7-89:DTMF transmission_

_C7_86,43,19,0,80,4
*This programming assigns the internati-
 onal call access number(Max. 4 digits).
*When erasing an access number for
 International call from the system
 data, push "DEL" button.
*Additional programming.
   2-04:Class of Service
   7-70:Local call digits for Class-2/3
   7-71:Restricted maximum dial digits
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code table
   7-85:Emergency code overrides
   7-89:DTMF transmission_ 
 
_C7_87,50,10,0,0,0
*This programming determines whether the system
 enables release of abandoned calls on hold and
 specifies the time that the system recognize
 the disconnect open if enabled.
 Select Release time/Abandoned hold.
  0:Not released
  1:400-600msec. loop on
  2: 20-90msec. loop on_

_C7_88,55,8,0,0,0
*This programming determines whether the system
 enables the intrusion tone for break-in, privacy
 release and non-private CO line.
 Select a condition of Intrusion tone for breake-in.
  0:Disable
  1:Enable_

_C7_89,50,19,0,80,4
*This programming determines whether the system
 allows the telephone set up to dial DTMF
 dialing for each Class of Service.
  0:Disable
  1:Enable
*Additional programming.
   2-04:Class of service
   7-70:Local call digits for Class-2/3
   7-71:Restricted maximum dial digits
   7-74:COS restriction on speed dial
   7-77:Permit code table for Class-2
   7-78:Permit code table for Class-3
   7-79:Permit code table for Class-4
   7-80:International call permit code
   7-81:Deny code table
   7-85:Emergency code overrides
   7-86:International call access number_


_C7_90,61,6,0,0,0
*This programming determines how long the system
 lasts the incoming indication after the call is 
 disconnected.
   Assigns Call abandonment time:1 to 6sec._

_C7_91,51,10,0,0,0
*This programming determines how long the system
 recalls the telephone initiating the hold.
 Select Hold alarm duration timer.
  0:No alarm
  1 to 255:(1 to 255)sec.
*Additional programming.
   7-30:Hold alarm timer
   7-31:Hold line termination timer_

_C7_92,49,8,0,0,0
*This programming specifies the no-answer time
 for call forward.
 Select Follow Me Xfer duration timer.
   1 to 255:(1 to 255)sec.
*Additional programming.
   8-24:Follow Me Xfer permitted_

_C7_93,48,7,0,0,0
*This programming sets up the grounding time.
   1 to 255:(1 to 255)x0.0165sec.
*Additional programing.
   3-20:Flashing/Grounding
   7-72:Flash/Function key_

_C7_94,63,6,0,80,4
*This programming determines when the system recalls the
 telephone initiating the Ring Inword Transfer.
   0:No feature
   1 to 255:(1 to 255)x10sec._

_C8_01,67,6,0,80,17
*This programming provides the selection of either preselection
 or single access on hook dialing when pressing an idle line key
 on station by station basis.
  0:Preselection  1:Single access on-hook dialing_

_C8_02,70,6,0,80,17
*This programming determines whether the idle trunk off-hook access
 is enabled on station by station basis.
  0:Disable  1:Enable
*Marking reference to [f.6] button_

_H8_02,43,6,0,80,11
*Additional programming.
   2-07:Outgoing line access priority
   2-08:Outgoing CO auto seizure
   8-31:Call origination access priority_

_C8_03,60,7,0,80,17
*This programming determines whether enables the incoming
 call off-hook access on station by station basis.
  0:Disable  1:Enable
*Additional programming.
   8-32:Incoming call access priority_

_C8_04,58,5,0,80,18
*This programming assigns the telephone that speed dial
 programming is enabled.
  0:Disable  1:Enable_

_C8_05,59,5,0,80,18
*This programming determines whether enables or disables
 dial touch tone on station by station basis.
  0:Disable  1:Enable_

_C8_06,63,6,0,80,17
*This programming determines whether enables or disables
 off-hook signaling for the busy telephone called on station
 by station basis.
  0:Disable  1:Enable_

_C8_07,59,7,0,80,17
*This programming determines whether enables or disables
 incoming unanswered alarm on station by station basis.
  0:Disable  1:Enable
*Additional programming.
  7-32:Unanswered incoming alarm timer_

_C8_08,59,6,0,80,17
*This programming determines whether enables or disables
 the handsfree confirmation tone that is sent out every
 6 seconds on station by station basis.
  0:Disable  1:Enable_

_C8_09,67,8,0,80,16
*This programming determines whether enables or disables
 the long conversation warning tone on station by station basis.
  0:Disable  1:Enable
*Additional programming.
   7-35:Long conversation warnig tone start
   7-36:Long conversation warning tone initiall start_

_C8_11,72,7,0,80,17
*This programming determines whether enables or disables to access
 the function of trunk to trunk transfer on station by station basis.
  0:Disable  1:Enable
*Additional programming.
   9-04:Trk to Trk Xfer permission_

_C8_12,72,5,0,80,18
*This programming determines whether enables or disables
 to send the splash tone on intercom and confirmation tone on paging.
  0:Disable  1:Enable_

_C8_13,59,6,0,80,17
*This programming determines whether enables or disables
 to originate the break-in on station by station basis.
  0:Disable  1:Enable
*Marking reference to [f.6] button_

_H8_13,47,6,0,80,11
*Additional programming.
   7-88:Intrusion tone for Break-in
   8-06:Busy(off-hook) Signaling permission
   8-14:Breake-in interrupted station assign_

_C8_14,60,7,0,80,17
*This programming assigns the telephone that the break-in
 is permitted on busy.
  0:Not interrupted  1:Interrupted
*Additional programming.
   8-13:Break-in permitted station_

_C8_15,77,7,0,80,17
*This programming determines to send either the Voice message or Busy tone
 to the dialin originated party when the extension called by dialin is the
 absence mode with voice message.
  0:Busy tone
  1:Voice message_

_C8_16,51,5,0,80,18
*This programming assigns the telephone that DND
 on intercom can be accessed.
  0:Disable  1:Enable_

_C8_17,51,5,0,80,18
*This programming assigns the telephone that DND
 on trunk can be accessed.
  0:Disable  1:Enable_

_C8_18,59,5,0,80,18
*This programming provides the selection of either voice
 call or signal call when an intercom call is received
  0:Ringing call  1:Voice announced call_

_C8_20,60,6,0,80,17
*This programming determines whether enables or disables
 to originate the Voice over on station by station basis.
   0:Disable   1:Enable
*Marking reference to [f.6] button_

_H8_20,45,6,0,80,11
*Additional programming.
  7-88:Intrusion tone for Break-in
  8-06:Busy(off-hook) signaling permission
  8-14:Break-in interrupted station assign_

_C8_21,42,6,0,80,17
*This programming assigns the telephone
 that can access Station voice message.
*Additional programming.
  7-66:Simplified voice recording_

_C8_22,53,7,0,80,17
*This programming assigns the Handsfree circuit to
 a telephone's exclusive use.
   0:Disable   1:Enable
*Total number of assigned telephones should be 
 within total number of Handsfree circuits._

_C8_23,59,5,0,80,18
*This programming determines whether enables or disables
 the paging access on station by station basis.
  0:Disable  1:Enable_

_C8_24,59,5,0,80,18
*This programming determines whether enables or disables
 to access call forward on station by station basis.
  0:Disable  1:Enable_

_C8_26,59,6,0,80,17
*This programming determines whether enables or disables
 the voice call when places an intercom call.
  0:Disable  1:Enable
*Making reference to [f.6] button_

_H8_26,65,9,0,80,8
*Additional programming.
   8-18:Intercom signal(ring/signal)
*If the programming of 8-18 is selected to ring call, the ring
 call is always initiated without the programming of 8-26.
*If the programming of 8-18 is selected to voice call,the call
 depends on the programming of 8-26, that is the voice call if
 enabled and ring call if disabled._

_C8_27,70,7,0,80,17
*This programming assigns the telephone that can be overrided while
 on DND.
  0:Not permitted  1:Permitted
*Additional prgramming.
   8-16:DND on intercom_

_C8_28,59,7,0,80,17
*This programming determines whether enables or disables
 to set up Absence messages on station by station basis.
  0:Not permitted  1:Permitted
*Additional programming.
   7-82:Absence message_

_C8_29,59,5,0,80,18
*This programming determines whether enables or disables
 speakerphone on station by station basis.
  0:Not permitted  1:Permitted_

_C8_30,60,7,0,80,17
*This programming provides the selection of the ringing
 Assignes Instantneous incoming permit to each extension.
  0:Not instantaneous
  1:Instantaneous CR mode
  2:Instantaneous /CR mode_

_C8_31,71,7,0,80,17
*This programming provides the selection of the priority
 for automatic off-hook access.
  0:Extension line   1:Loop access trk/Individual trk/Extension line
  2:Individual trk/Loop access trk/Extension line
*Making reference to [f.6] button_

_H8_31,37,4,0,80,13
*Additional programming.
   8-02:Idle trunk off-hook sccess_

_C8_32,77,6,0,80,17
*This programming provides the selection of the priority
 for Automatic off-hook answer.
  0:Trunk calls are given priority(In order of calls for Single line Tel.)
  1:Intercom calls are given priority_

_C8_33,74,6,0,80,17
*This programming provides the selection of the CO incoming ring signal
 on station by station basis.
 Seperate assignment is available for the day and night mode.
*Making reference to [f.6] button_

_H8_33,71,6,0,80,11
D is assigned Trunk incoming call tone to (1 to 8) in the daytime.
N is assigned Trunk incoming call tone to (1 to 8) in the nighttime.
*Additional programming.
   7-50:Incoming call tone difinition_

_C8_34,79,6,0,80,17
*This programming provides the selection of the intecom incoming ring signal
 on station by station basis.
 Seperate assignment is available for the day and night mode.
*Making reference to [f.6] button_

_H8_34,74,6,0,80,11
D is assigned Intercom incoming call tone to (1 to 8) in the daytime.
N is assigned Intercom incoming call tone to (1 to 8) in the nighttime.
*Additional programming.
   7-50:Incoming call tone difinition_

_C8_35,76,5,0,80,18
*This programming provides the selection of the long cycle ringing signal
 for CO calls and intercom calls.
*Making reference to [f.6] button_

_H8_35,68,9,0,80,9
  0:Standard cycle ringing
  1:Long cycle ringing on CO calls
  2:Long cycle ringing on intercom calls
  3:Long cycle ringing on CO/ ICM calls
  4:1sec.on/2sec.off ringing on CO/ICM calls for single line tel.
*Additional programming.
   7-33:Long cycle ringing period_

_C8_36,78,5,0,80,18
*This programming assigns the hot line by off-hook access(station/station).
*HL No. is assigned the other party TEN No. of Hot line.
  HL=00:Unassigned_

_C8_38,78,4,0,80,18
*This programming assigns the telephone which the headset can be connected.
  0:Not connected   1:Connected_

_C8_40,59,6,0,80,17
*This programming determines whether enables or disables
 to monitor the conversation of another party.
 Only transmission of intercom party can be monitored.
  0:Disable  1:Enable_

_C8_41,76,8,0,80,16
*This programming provides the selection of Handsetreceive volume control
 on station by station basis.
  0:Return to the initial mode after on-hook
  1:Does not return to the initial mode by on-hook but can releace
    by manual operation.
  2:Always enable to adjust by volume control_

_C8_42,59,5,0,80,18
*This programming determines whether enables or disables
 the dial blocking on station by station basis.
  0:Disable  1:Enable_

_C9_01,66,7,0,80,17
*This programming assigns the telephone number to each line key
 so that the telephone number can be indicated on the display
 telephone when presses the FCTN key and line key the telephone
 number assigned by this programming.
*Making reference to [f.6] button_

_H9_01,75,7,0,80,10
*A telephone number can be stored up to 12 digits including "-"
 which is used to seperate the data entries.
*Use the [DEL] button to erase the telephone number stored the line key.
*Additional programming.
   7-01:Trunk number Indication_

_C9_02,40,11,0,80,5
*This programming assigns the private
 line for the executive telephone.
  0:Common use line
  1:Executive private line
*Additional programming.
   2-10:Executive set assignment
   2-11:Secretary set assignment
   3-03:Ringing station(day))
   3-04:Ringing station(night)_

_C9_03,43,11,0,80,5
*This programming provides the selection
 of either voice message device or trunk
 forwarding for CO incoming calls at the
 night mode.
 Assigns Trk to Trk forward(night) to
 each CO line.
  0:Non
  1:Voice message device
  2:Trunk forward_

_C9_04,56,19,0,80,4
*This programming assigns the line number that trunk
 to trunk transfer can be permitted.
  0:Disable
  1:Enable
 <EX>
   LINE No.=10
    LINE
     No. T
      01-0    
      02-1  i.e Line 10 can be transfered to Line 02
      :  :
*Additional programming.
   8-11:Trk to Trk Xfer permission
   9-05:Speech level for Trk to Trk
*Error Code E05
 The line assigned to the voice mail is enabled trunk
 to trunk Xfer._

_C9_05,43,11,0,80,5
*This programming provides the selection
 of speech level compensation during
 trunk to trunk transfer mode.
  0:2dB up
  1:4dB up
  2:6db up
*Additional programming.
   8-11:Trk to Trk Xfer permission
   9-04:Trk to Trk Xfer permission_

_C9_08,39,7,0,80,5
*This programming determines whether
 permit the Camp-on on line by line
 basis.
  0:Disable
  1:Enable_

_C9_09,41,13,0,80,5
*This programming assigns the lines
 that the incoming ring can be audible
 on the external speakers.
 Seperate assignment is available for
 the night and day mode.
D is assigned this feature
 in the daytime.
N is assigned this feature
 in the nighttime.
   0:Not audible
   1:Audible_

_C9_10,40,11,0,80,5
*This programming determines whether
 enables or disables to send hooking
 pulse for tandem line.
  0:Disable
  1:Enable
*Additional programming.
   7-45:Hooking pulse for tandem
        connect
   7-46:Hooking pulse time range_

_C9_11,50,7,0,80,7
*This programming defines that the tandem
 trunk (defined in system data 3-01) is
 connected to the TIE Line (AC15/DC5) or not.
  0:Not TIE Line
  1:TIE Line_

_C9_14,50,7,0,80,7
*This programming determines the pause duration
 inserted automatically after sending the MCL
 access code by Line basis.
        00 : Not insert the pause
  01 to 10 : (1 to 10) x 3sec_

_C9_20,42,8,0,80,5
*This programming assigns the line that
 the trunk to trunk forwarding can be
 enabled.
  {t}, 00=unassigned
*Additional programming.
   9-03:Trk to Trk forward(night))_

_C9_21,41,15,0,80,5
*This programming assigns the line
 number and extension number that the
 voice mail can be connected.
*Additional programming.
   2-01:Terminal type
   3-01:Line definition
   3-02:Circuit type
   3-09:Answering condition
   9-04:Trk to Trk transfer permission
*Error Code E05
The TEN connected to the voice mail is
not registered on the analog termial
with MF._

_C9_22,37,10,0,80,5
*This programming assigns the Non-
 private CO line.
 Select Non-Private CO line.
   0:Ordinary CO line
   1:Non-Private CO line
*Outside calls placed on the Non-
 private CO line can be monitored
 by any other telephone._

_C10_03,74,5,0,80,18
*This programming assigns the paging group on station by station basis.
  0:Out of the group   1:In the group
*Marking reference to [f.6] button_

_H10_03,61,12,0,80,6
*Up to 10 groups(00 to 09) are available and a telephone
 can be only assigned into one group of 01 to 09.
 However,all telephones can only be assigned into group 00
 at the same time.
*Group 00 paged dial No. "80"
 Group 01 paged dial No. "81"
             :
 Group 09 paged dial No. "89"
*Error Code E04
 There are same TENs in the paging group 1 to 9._

_C10_04,59,6,0,80,18
*This programming assigns the Doorphone ringing station.
 Up to two doorphones are available to install.
 Doorphone No.=01 or 02
  0:Not audible  1:Audible_

_C11_01,44,21,0,80,2
*System speed dialing allows storage of
 90 and Max. 20-digits telephone number
 under the 2 digits code 00 to 89.
 If PBX line is connected,a trunk access
 code should be attached at the head of
 telephone number.
Page:01 to 09
Speed dial No.:00 to 89
  KEY BUTTON    FUNCTION
  0-9,*,#      Dial "0-9,*,#"
  [P]          Pause(3 sec.)
  [DEL]        Erasing a dial
  [F 9]        Stop dialing
*Use the "P"button for a pause(3sec),the 
 "DEL" button for erasing a dial and "F"
 +"9" button for stop dialing. However,a
 pause will be inserted automatically af-
 ter trunk access code without insert "P"
*Marking reference to [f.6] button._

_H11_01,44,6,0,80,17
*Max.8 digits can be stored for NAME of
 each Speed dial number.
*Use the "SPACE" button for erasing a 
 digit of NAME._
  

_C11_02,53,19,0,80,4
*Personal speed dialing for each station allows
 storage of 10 and 20-digits telephone number 
 under the 2 digits code 90 to 99. If PBX line is
 connected,a trunk access code should be attached
 at the head of telephone number. 
{t}
Speed dial No.:90 to 99
   KEY BUTTON    FUNCTION
   0-9,*,#      Dial "0-9,*,#"
   [P]          Pause(3 sec.)
   [DEL]        Erasing a dial
   [F 9]        Stop dialling
*Use the "P" button for a pause(3sec),the "DEL"
 button for erasing a dial,the "F"+"9" button 
 for stop dialing.
 However,a pause will be inserted automatically
 after trunk access code without insert "P"._
 

_C11_03,53,19,0,80,4
{t}
*Service feature can be stored under one touch 
 keys (F01 to F10) on the telephone. Maximum 22 
 digits are available. The utilizable key buttons
 are as follows.
  BUTTON    FUNCTION       BUTTON    FUNCTION
 0-9,*,#  Dial "0-9,*,#"   [F 0]  Speaker key(SPK)
 [P]      Pause(3 sec.)    [F 1]  Mic. key(MIC)
 [DEL]    Erasing a dial   [F 2]  Redial key(LND)
 [L 0 0]  Line Key(PK)     [F 3]  Setting key(SET)
 [L 0 1]  Line Key(LK)-1   [F 4]  Funct. key(FCTN)
 [L 0 2]  Line Key(LK)-2   [F 5]  Hold key(HOLD)
    :            :         [F 6]  Flash key(FLASH)
 [L 1 2]  Line Key(LK)-12  [F 7]  Clear key(CLEAR)
                           [F 8]  Flashing+seizure
                           [F 9]  Stop dialling
*"F"+"0"button(SPK) can use only for first digit._

_C11_04,53,19,0,80,4
DSS/DLS No.:01 to 12
*Service feature can be stored under one touch
 keys(F01 to F12) on the DSS/DLS cosole.
 Maximum 22 digits are available.
 The utilizable key buttons are as follows.
  BUTTON    FUNCTION       BUTTON    FUNCTION
 0-9,*,#  Dial "0-9,*,#"   [F 0]  Speaker key(SPK)
 [P]      Pause(3 sec.)    [F 1]  Mic. key(MIC)
 [DEL]    Erasing a dial   [F 2]  Redial key(LND)
 [L 0 0]  Line Key(PK)     [F 3]  Setting key(SET)
 [L 0 1]  Line Key(LK)-1   [F 4]  Funct. key(FCTN)
 [L 0 2]  Line Key(LK)-2   [F 5]  Hold key(HOLD)
    :            :         [F 6]  Flash key(FLASH)
 [L 1 2]  Line Key(LK)-12  [F 7]  Clear key(CLEAR)
                           [F 8]  Flashing+seizure
                           [F 9]  Stop dialling
*"F"+"0" button(SPK) can use only for first digit._ 

_C11_05,50,19,0,80,4
{t}
*Maximum 22 digits of personal speed dial can
 be stored under the one touch key(F01 to F10)
 on the telephone. If PBX line is connected,a
 trunk access code should be attached at the 
 head of telephone number. The utilizable key
 buttons are as follows.
    BUTTON    FUNCTION
   0-9,*,#  Dial "0-9,*,#"
   [P]      Pause(3 sec.) 
   [DEL]    Erasing a dial
   [F 9]    Stop dialling
*Use the "P" button for a pause(3sec),"DEL" 
 button for erasing a dial,"F"+"9" button 
 for stop dialing.
 However,a pause will be inserted automatically
 after trunk access code without insert "P"._
				 

_C11_06,50,19,0,80,4
DSS/DLS No.:01 to 12
*Maximum 22 digits of personal speed dial can
 be stored under the one touch key(F01 to F12)
 on the DSS/DLS console. If PBX line is
 connected, a trunk access code should be
 attached at the  head of telephone number.
 The utilizable key buttons are as follows.
    BUTTON    FUNCTION
   0-9,*,#   Dial "0-9,*,#"
   [P]       Pause(3 sec.) 
   [DEL]     Erasing a dial
   [F 9]     Stop dialling
*Use "P" button for a pause(3sec),"DEL" button
 for erasing a dial,"F"+"9" button for stop
 dialing.
 However,a pause will be inserted automatically
 after trunk access code without insert "P"._
 
 
_C11_07,48,13,0,80,5
{t}
*ICM number using for direct station 
 selection can be stored under the one touch
 key(F01 to F10) on the telephone.
 The utilizable key buttons are as follows.
    BUTTON    FUNCTION
   0-9      Dial "0-9"
   [DEL]    Erasing a dial
*Additional programming.
  1-06 Extension Number Digits
  2-02 Extension Number_


_C11_08,48,14,0,80,5
DSS/DLS No.:01 to 12
*ICM number using for direct station
 selection can be stored under the one touch
 key(F01 to F12) on the DSS/DLS consol. The
 utilizable key buttons are as follows.
    BUTTON    FUNCTION
   0-9       Dial "0-9"
   [DEL]     Erasing a dial
*Additional programming.
  1-06 Extension Number Digits
  2-02 Extension Number_


_C11_09,48,5,0,80,5
*Max.8 digits can be stored for NAME of each
 extension.
*Use the "SPACE" button for erasing a digit._

_C11_10,38,9,0,80,5
*Max.8 digits can be stored for 
 NAME of each station group.
*Use the "SPACE" button for erasing
 a digit.
*Additional programming.
  4-01 Station Groupings
  4-02 Pilot number Setup_

_C11_12,20,16,0,80,5
*Max.7 digits can
 be stored for
 NAME of each
 Line.
*Use the "SPACE"
 button for era-
 sing a digit.
*Additional
  programming
  7-01 Trunk #
       Indication
  9-01 Line/
       Number
       Indication_


__

