*SELECT DRIVE
This menu displays the drives that were found on 
the SCSI host bus adaptor.  Select the drive to
be formatted.

NOTE: You must partition the drive with Future
      Domain's FDFDISK or DOS's FORMAT partitioning
      program before using this program to format
      the media.

*SELECT PARTITION
This menu displays the available partitions on the
selected drive.  Select the partition to be
formatted.

NOTE: This program will not allow you to format
      NON-DOS partitions.  You must also be running
      under DOS 4.x to format DOS 4.x partitions.

*FORMAT PARTITION
VOLUME LABEL: Enter a string up to 11 characters in
        length to identify the partition. (Optional)

QUICK FORMAT: Select this option if you do not wish
        to verify or initialize the data area of the
        partition.

INITIALIZE: Select this option if you want to write
        a pattern out to the data area of the
        partition.

VERIFY: Select this option if you want to verify the
        the data area of the partition.
        (Same as DOS's format program)

TRANSFER SYSTEM:  Select this option if you want to 
        make the partition bootable. (Only available
        if the partition is marked active)

*GET PATTERN
Enter a 2-byte hex number (4 characters with a value
        range of 0 - 9 or A - F each).

Press ENTER to use the default pattern.

*NO HELP
There is no help available.

*SELECT DRIVE LETTER
Enter the drive letter where the system files can
be found.

NOTE: If any of the system files on the specified
      disk are damaged or missing, the system
      transfer will be aborted.

*PARTITION DESTROY
Enter 'Y' if you wish to format this paritition.

NOTE: If you selected the Quick Format option, the
      data area of this partition will not be
      overwritten.

