*TARGET DRIVE MENU
Select the drive you want the config.sys file
created/modified and the device driver copied
to.

NOTE: If the CONFIG.SYS file cannot be found on the
      selected drive, a window will prompt you
      if you want to create this file.  If there
      is any other type of error, this program
      will be terminated.

*SECTOR SIZE MENU
Select the sector size you want the driver to
reserve for all the drives supported by the driver.
This is necessary when using removable drives and
you intend to insert cartriges with larger partition
sizes than were in the drive upon bootup.
   Example: If you bootup using a removable drive
        with a cartridge having a maximum partition
        size of 20MB and later intend to insert a
        cartridge with a partition size of 40MB you
        will need to select a sector size of 1024.

*DRIVE MENU
Select a drive to edit the available driver
options.

NOTE: A "N/A" on this menu represents that this
      option is not available for this drive
      which is determined by the device type.
      (removable or fixed)        

*EDIT DRIVE OPTIONS
SKIP DRIVE: Select this option if you do not want
        the driver to support this drive.
        (available for fixed & removable)
LIMIT # OF PARTITIONS: Select this option if you 
        want the driver to support a limited number
        of partitions on this drive.
        (available for fixed & removable)
TREAT FIXED AS REMOVABLE: Select this optiion if you
        want the driver to recognize this drive as
        a removable device.
	(available for fixed only)

*MAIN MENU
The main menu allows you to select the available 
options supported by this program.  For specific
help on an option, select the option and press
the F1 key.

*PARTITION LIMIT
Enter the number of partitions you want the driver
to support on this drive which can be a value from
1 to 24.  

*NO HELP
There is no help available.


