INSTALLING THE VGA ADAPTER 800x600 and 1024x768 DRIVERS
               FOR VENTURA PUBLISHER VERSIONS 1.1 - 2.0


The following instructions are applicable to users of Ventura
Publisher Versions 1.1 - 2.0 and the VGA Adapter.

The enclosed Ventura 800x600 and 1024x768 driver files are installed
AFTER Ventura Publisher has been installed on your system.The drivers
make full use of the 800x600 or 1024x768 graphics modes of the VGA
Adapter. Your VGA monitor must be capable of displaying this
resolution in order to utilize this driver.

          Be sure that your VGA monitor can display
          800x600- and/or 1024x768-pixel resolution.
          Choosing a higher resolution than your
          monitor is capable of displaying will bring
          about unsatisfactory results.



To install your VGA driver, perform the following steps:

          1) Follow the Ventura installation instructions.

          2) When you are asked to select a video adapter, choose

           E IBM Personal System/2 (640x480) two colors. (Version 1.1)
           E IBM VGA or Compatible (640x480) 2 colors. (Version 2.0)

          3) Complete Ventura Publisher installation and see that
             it is working properly using the installed IBM
             driver.

          4) Exit Ventura Publisher.

          5) Log on to your C:\GEM&VP subdirectory, e.g.:

                C:>cd GEM&VP  [ENTER]

                and type VPDRV2_0 [ENTER]

          6) The program will ask you some questions about your
             Ventura configuration. Answer them appropriately.

          7) When the program asks you what display device and
             resolution you want to install for, make a
             selection,

                VGA Adapter (800x600) 16 colors or greys.
                VGA Adapter (1024x768) 16 colors or greys.

             whichever is appropriate or desirable for your
             hardware configuration.

          8) The program then asks for the type of mouse you
             have. Respond (appropriately) as you did during your
             initial installation.



          9) Finally, the program displays the choices you have
             made and provides you the opportunity to change. If
             no change is necessary, press [ENTER] or "Y" (the
             default response is "Y") and the driver will be
             installed.

          10) If you desire a change press "N" [ENTER] and make
             your changes.