STANDARD MICROSYSTEMS CORPORATION 

                        FTP Packet Driver 
               For EtherCard PLUS Family LAN Adapters

                       RELEASE INFORMATION

               Version 2.03            14 August 1991


VERSION HISTORY

-- Version 2.03 (Current Release) --

Fixed problem where board would fail memory test during initialization
on 16-bit LAN Adapter boards, when installed in a system with a 16-bit
VGA board that was configured in forced 16-bit mode (ie. not autosense).

Added support for 8K, 32K, and 64K ram sizes on

 1. SMC8013EP/A
 2. SMC8013WP/A

LAN adapter cards (16K already supported).

-- Version 2.02 --

This version includes support for the following SMC Ethernet cards.

 1. SMC8013EP/A
 2. SMC8013WP/A

This version fixes the following bugs found in version 2.01.

 1. Interrupts 10, 11 and 15 now work with the WD8013EB and WD8013EBT.
 2. Loading, unloading, and then reloading the Packet Driver now works.

-- Version 2.01 --

This version contains a modification which will allow Novell's
NetBIOS to be loaded after IPX.COM and before the packet driver
(8003PKDR). Previously 8003PKDR would function only if loaded
prior to Novell's NetBIOS.

This version contains modifications for the WD83C690 Network
Interface Controller. This version or later versions must be
used with adapters which contain the WD83C690.

NOTE
Use of adapters which contain the WD83C690 with previous
versions of this driver may lead to data integrity problems.

-- Version 2.00 --

This release of the Packet Driver conforms to the FTP
Software's Packet Driver Specification v1.09. It can be
loaded as a "Stand-Alone" driver as well as be loaded on
top of the NetWare Shell (IPX.COM) driver sharing the LAN
adapter with the NetWare Shell. This driver has been tested
with FTP's PC/TCP, Wollongong's WIN/TCP, and NCSA's TELNET
software packages. The INSTALL.DOC contains information
on installing with each these software packages.

-- Version 1.00 --

This is the first official release of this PC/TCP Packet
Driver v1.00. It conforms to the FTP Software Packet
Driver Specification v1.08, and implements the "basic"
functions.  The driver runs on top of the Netware Shell
driver (IPX.COM), and the two drivers share one adapter to
transfer both TCP/IP packets and Netware packets.  In
order to use this driver, you must have the Netware IPX.COM
generated with driver (.OBJ & .LAN) release v3.07 files or
later. This driver can not be used with the StarLAN driver
using the Novell/AT&T StarLAN packet format.


EtherCard PLUS, TokenCard, and SuperDisk are trademarks, and SMC and 
Standard Microsystems are registered trademarks of Standard Microsystems
Corporation. Other trademarks mentioned herein belong to their respective
companies.