NETWORK DRIVER FOR IBM LAN SERVER 3.0 DOS CLIENT
  ================================================

Install NDIS driver for IBM LAN Server DOS Client
-------------------------------------------------

1. Use DXMAID to install the protocol and adapter driver
   of DOS Requester for the client.

2. Select WD driver as a temporary driver.

3. DXMAID program created a sub-directory \lsp.

4. Copy L8029.DOS NDIS driver from the network adapter driver
   diskette. L8029.DOS is located in

        \NDIS\L8029.DOS

5. Edit the CONFIG.SYS, and PROTOCL.INI as the following samples:

   *** CONFIG.SYS ***

                  device=\lsp\protman.dos /I:\lsp
   NDIS driver -> device=\lsp\l8029.dos
                  device=\lsp\dxma0mod.sys 001
                  device=\lsp\dxmj0mod.sys
                  lastdrive=Z

   *** PROTOCOL.INI ***

                  [PROTMAN_MOD]
                       DriverName = PROTMAN$
                  [DXMJ0MOD_MOD]
                       DriverName = NETBEUI$
   Bind to le8029r ->  Bindings = LE-8029R
                       NCBS = 15
                       ADAPTRATE = 1000
                       WINDOWERROR = 0
                       PIGGYBACKACKS = 1
                       DATAGRAMPACKETS = 2
                       PACKETS = 50
                       PIPELINE = 20
                       MAXTRANSMITS = 6
                       MINTRANSMITS = 2
                       LANABASE = 0
                       CHAINX5C = 0
                  [LE-8029R]
                       DriverName = L8029$