Packet Driver for FTP PC/TCP Installation
	   ===============================================

 The NIC100.COM program is complies with the FTP PC/TCP Packet driver
 Specifications. This packet driver allow you to use NIC100 Jumperless
 Ethernet Adapter with FTP PC/TCP software.

    Installation Procedures :

    a. Execute the NIC100.COM program by follows command line :

	    > NIC100  [<SOFTWARE_INT> <IRQ> <IO_ADDR>]

       <SOFTWARE_INT> :  interrupt vector number, which can be
			 decimal, hexadecimal or octal format.
			 if:
			 decimal format -- from 96 to 128
			 hexadecimal ----- from 0x60 to 0x80
			 octal format ---- from 0140 to 0200

       <IRQ> :		interrupt setting. The setting can be selected
			2,3,4,5,10,11 or 12 for NIC100 Ethernet Adapter.
			The default setting is 3.

       <IO_ADDR>  :	I/O Base Address setting on the NIC100 Ethernet
			Adapter. The setting can be selected 0x300, 0x320,
			0x340, and 0x360 .
			The default setting is 0x300.

       Note: user can use default settings by only type "NIC100". The
	     program will automatic search NIC100 Ethernet adapter,
	     and uses its internal setting.

    b. Execute the \ETHDRV.EXE device program, which is provided by FTP
       with PC/TCP software package together.

       Now, your NIC100 Ethernet Adapter is work with FTP PC/TCP.


       NOTE: Except the FTP software's PC/TCP package, most of the DOS
	     version's TCP/IP software also can be run with packet driver.
	     Please refer to the software package installation for packet
	     driver install procedure.