Installation Guide for Lantastic/AI
	      ==========================================

 To install Lantastic/AI v4.x or Lantastic/AI v5.x software on a workstation,
 follow the instructions.

    Installation Porcedures :

    a. Run your existing DOS system as you usually do.

    b. Place the Lantastic/AI Network Operating System Disk #1 in
       floppy drive A: or B:

    c. Change to the drive containing the diskette and type
       "INSATLL" at the system prompt, then press <Enter>.

    d. Choose NE2000 as your Ethernet Hardware Adapter.

    e. Follow all the operations as you are prompted on the screen.

    f. After installing the Netware Operating System, reboot your system.


    --- Sample AUTOEXEC.BAT file ---

	   :
	call C:\LANTASTI\STARTNET.BAT
	   :
	   :


    --- Sample STARTNET.BAT file for Lantastic/AI v4.x ---

	   :
	@ECHO OFF
	PATH C:\LANTASTI;%PATH%
	SHARE /L:200

	NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE
	AILANBIO
	REDIR ADMIN LOGINS=3
	SERVER C:\LANTASTI.NET

	NET LOGIN/WAIT \\ADMIN ADMIN
	NET LPT TIMEOUT 10
	   :
	   :


    --- Sample STARTNET.BAT file for Lantastic/AI v5.x ---

	   :
	@ECHO OFF
	SET LAN_DIR=C:\LANTASTI.NET
	SET LAN_CFG=C:\LANTASTI
	PATH C:\LANTASTI;%PATH%

	SHARE /L:200

	NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE
	AILANBIO
	REDIR ADMIN LOGINS=3
	SERVER C:\LANTASTI.NET

	NET LOGIN/WAIT \\ADMIN ADMIN
	NET LPT TIMEOUT 10
	NET POSTBOX
	   :
	   :