***********************************************
*  CNet ISA-Bus PowerNIC Driver Installation  *
*  > NetWare OS/2 ODI Workstation             *
***********************************************

The NetWare ODI driver for OS/2 is stored in the OS2_ODI subdirectory
of the PowerNIC diskette.

1. First, install NetWare Requester for OS/2 in the PC.

2. Copy E200P driver to the subdirectory of NetWare.
   At the OS/2 prompt, type the following commands:

   COPY A:\OS2_ODI\E200P.SYS C:\NETWARE\

   NOTE: This assumes the diskette is in drive A.

3. Use a text editor to modify C:\CONFIG.SYS as follows:
       ...
       ...
     DEVICE=C:\NETWARE\LSL.SYS
     RUN=C:\NETWARE\DDAEMON.EXE
  >> DEVICE=C:\NETWARE\NE2000.SYS << ---  change NE2000.SYS to E200P.SYS
       ...
       ...

4. Use a text editor to create the file NET.CFG in the C:\NETWARE subdirectory.

   The following is an example of the C:\NETWARE\NET.CFG file:

   Link driver E200P
       INT 3
       PORT 300
       FRAME Ethernet_802.3

5. Shut down and reboot the computer.

   NOTE: There is a text editor named E.EXE to use under OS/2 full screen.
         To edit the two files above, at the OS/2 prompt, type:

         E C:\CONFIG.SYS
      or
         E C:\NETWARE\NET.CFG