***********************************************
*  CNet ISA-Bus PowerNIC Driver Installation  *
*  > NetWare 4.x ODI Server                   *
***********************************************

The NetWare 4.x ODI server driver file is stored in the \NW_4
subdirectory of the PowerNIC diskette.

1. Power on the file server, and execute Novell's SERVER.EXE program.

2. Load the LAN driver E200P.LAN. (Two different methods are shown here.)

   METHOD 1 --
    At the server's prompt, load the driver E200P.LAN and bind it
    (this also automatically loads MSM.NLM and ETHERTSM.NLM). The general
    way of using these parameters is:

    LOAD <driver name> <PARAMETER NAME>

    Example:

    LOAD A:\NW_4\E200P.LAN PORT=300 INT=3 FRAME=Ethernet_802.2 NAME=E200P_802.2
    BIND IPX TO E200P_802.2 NET=2

    LOAD A:\NW_4\E200P.LAN PORT=300 INT=3 FRAME=Ethernet_802.3 NAME=E200P_802.3
    BIND IPX TO E200P_802.3 NET=3

    NOTE: This assumes that this diskette is in drive A.

   METHOD 2 --
     a) At the server's prompt type: LOAD INSTALL
     b) When the install menu appears, choose the menu item.
     c) Install the LAN driver E200P.LAN according to the NetWare manual,
        or use the on-line instructions.

3. The server program will load and execute the E200P.LAN driver module.
   Please refer to the NetWare 4.x Installation Manual for more information
   on making an auto-execution batch file to load the E200P.LAN module.