Copyright: CNet Technology Inc.


DECchip21140 PCI Fast Ethernet Controller
CNet CN100TX Fast Ethernet Adapter

Use this dialog box to setup the connection for the CNet CN100TX fast ethernet adapter .

AutoSense

100Mbps

100Mbps- Full Duplex

10Mbps

10Mbps - FullDuplex


DECchip 21041 PCI EthernetController
CNet 935E/935X

Use this dialog box to setup the connection for the CNet 935E/935X PCI ethernet adapter .

AutoSense

TwistedPair

Twisted Pair - FullDuplex

Twisted Pair - No LinkTest

BNC


TwistedPair
Select the 10BaseT connection through theTwisted Pair port.


Twisted Pair - FullDuplex
Select the Full Duplex 10BaseT (20 Mbps) connection through the Twisted Pair port.


Twisted Pair - No Link Test
Select the 10BaseT connection with no Link IntegrityTest.

Choose this option if the adapter is connected to a hub which does not generate link pulses to check the link integrity.


BNC
Select the 10Base2 (Thinwire) connection through the BNC connector port.


AUI
Select the 10Base5 (Thickwire) connection through the AUI 15_pin connector port.


100Mbps
Select the Fast Ethernet 100BaseTx connection.


100Mbps - Full Duplex
Select the Fast Ethernet Full_Duplex 100BaseTx connectiont.


10Mbps
Select the 10BaseT connection through the 10Mbps port.


10 Mbps - FullDuplex
Select the Full Duplex 10BaseT( 20 Mbps) connection through the 10Mbps port.


Twisted Pair - NWay Enabled
Select the 10BaseT connection through the Twisted Pair port.Twisted Pair's NWAY negociation is enabled.


Perform power-up autosense on all types of adapter in order to connect to the active line.  The media's precedence is TP,BNC.


Autosense dynamically the media ports supported by the adapter.  The media's precedence is TP,BNC.Twisted Pair's NWAY negociation is enabled.


Autosense dynamically the media ports supportedby the adapter.  The media's precedence is 100Mbps,10Mbps.  AutoSense doesnot support Full_Duplex modes.