****************************************
*    Installation LAN Server Driver    *
****************************************

  1. Insert the driver disk into drive A: or B:.

  2. In the window titled "Command Prompt", click the OS/2 Full Screen
     icon.

  3. Jump to the IBMCOM directory and execute the LAPS command. The LAN
     adapter protocol setup menu will appear. There are five items:
     Install, Configure, Remove, Exit, and Help.

  4. Click the "Install" item.

  5. Assign drive A: or B: with path \LANSERVE to install the
     driver onto the hard disk under the Install Aditional Network Drivers
     window.

  6. After copy is complete, the message "LAPS Successfully Installed
     the Network Driver CNet CN935 PCI Bus Ethernet Adapter" appears.
     Then, click OK and return to the main menu.

  7. Next, choose the "Config" button to configure the environment of the driver.

  8. Click on the "Continue" item in "Configure Workstation".

  9. In the "Configure Workstation", the window consists of Network Adapter,
     Protocol, and Current Configuration. Choose the "Cnet CN935 PCI Bus
     Ethernet Adapter" item in Network Adapter along with the appropriate
     protocol types.  Finally, the Current Configuration displays all of
     user's requirements. Check that all is correct, then click the OK button.

 10. Return to the main menu, choose exit, and reboot.