Packet	Driver
		    FTP PC/TCP Installation
	       ==================================

This programs is complies  with the FTP PC/TCP Packet driver
Specifications. This packet driver allow you to run AE-200 and
ET-200 series Ethernet 16 bit Adapter with FTP PC/TCP software.

This driver included in the directory \PCTCP are contents as
below:

\PCTCP\AE200PD.COM    Packet Driver for 16 bit Ethernet Adapter

\PCTCP\INSTALL.DOC   This file descibes how to install the
		     packet driver for FTP PC/TCP




    Procedure of installing the Packet Driver AE200PD.COM
 --------------------------------------------------------------

1. Execute the >AE200PD.COM program by follows command line :

	       >AE200PD <SOFTWARE_INT> <IRQ> <IO_ADDR>

   <SOFTWARE_INT> :  interrupt vector number, which can be
		     decimal, hexadecimal or octal format.
		     if:
		     decimal format -- from 96 to 128
		     hexadecimal ----- from 0x60 to 0x80
		     octal format ---- from 0140 to 0200

   <IRQ> :	    interrupt setting. The setting can be selected
		    2,3,4,5,10,11 or 12 for AE-200 and ET-200 series
		    Ethernet 16 bit Adapter.

		    (The default setting is 3 on AE-200 and ET-200
		    series Adapter)
   <IO_ADDR>  :     I/O Base Address setting on the AE-200 and ET-200
		    Ethernet 16 bit Adapter. The setting can be
		    selected 0x300, 0x320, 0x340, and 0x360 .

		    (The default setting is 0x300 on AE-200 and
		    ET-200 series Adapter)

2. Execute the \ETHDRV.EXE device program, which is provided
   by FTP with PC/TCP software package together.


   Now, your AE-200 or ET-200 series Adapter is work with FTP
   PC/TCP.




   NOTE: Except the FTP software's PC/TCP package, most of the
	 DOS version's TCP/IP software also can be run with
	 packet driver. Please refer to the software package
	 installation for packet driver install procedure.