Driver for Lantastic/AI Installation
		  様様様様様様様様様様様様様様様様様様

 To install Lantastic/AI v4.x or Lantastic/AI v5.x software on a workstation,
 follow the instructions.

****** Installation Porcedure ******

	1. Run your existing DOS system as you usually do.

	2. Place the Lantastic/AI Network Operating System Disk #1 in
	   floppy drive A: or B:

	3. Change to the drive containing the diskette and type
	   "INSATLL <Enter>" at the system prompt.

	4. Choose NE2000 as your Ethernet Hardware Adapter.

	5. Follow all the operations as you are prompted on the screen.

	6. After installing the Netware Operating System, reboot your system.

    --- Sample AUTOEXEC.BAT file ---
	   :
	call C:\LANTASTI\STARTNET.BAT
	   :
	   :

    --- Sample STARTNET.BAT file for Lantastic/AI v4.x ---
	   :
	@ECHO OFF
	PATH C:\LANTASTI;%PATH%
	SHARE /L:200

	NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE
	AILANBIO
	REDIR ADMIN LOGINS=3
	SERVER C:\LANTASTI.NET

	NET LOGIN/WAIT \\ADMIN ADMIN
	NET LPT TIMEOUT 10
	   :
	   :

    --- Sample STARTNET.BAT file for Lantastic/AI v5.x ---
	   :
	@ECHO OFF
	SET LAN_DIR=C:\LANTASTI.NET
	SET LAN_CFG=C:\LANTASTI
	PATH C:\LANTASTI;%PATH%

	SHARE /L:200

	NEX000 IRQ=3 IOBASE=300 16-BIT VERBOSE
	AILANBIO
	REDIR ADMIN LOGINS=3
	SERVER C:\LANTASTI.NET

	NET LOGIN/WAIT \\ADMIN ADMIN
	NET LPT TIMEOUT 10
	NET POSTBOX
	   :
	   :