



     GRAPHWIN.TXT--Use PRINTDOC.BAT to print these docs,
     NOT WordPerfect!



            G  R  A  P  H  C  A  T (W i n d o w s)    V   4 . 1
            ===================================================

                             Clip Art Cataloger


             for WordPerfect 8, 7, 6.1, 6.0a, 6.0, 5.2, & 5.2+ 
                      Running in Windows 95, NT, & 3.1

                          A Software Package from:
                   Science Translations Software Services
                              P. O. Box 20234
                        Baltimore, MD 21284-0234 USA

                Internet Home Page: http://www.graphcat.com

                              _______
                         ____|__     |               (R)
                      --|       |    |-------------------
                        |   ____|__  |  Association of
                        |  |       |_|  Shareware
                        |__|   o   |    Professionals
                      -----|   |   |---------------------
                           |___|___|    MEMBER


              All materials (C) Copyright 1993-97 Jerry Stern
                            All Rights Reserved

               Introduction and QUICK REFERENCE are on page 3
              NEW in version 4.1--WPWin8 support--See page 12

     GRAPHCAT is a copyrighted program distributed as SHAREWARE. All
     rights are reserved. You may try out the program for up to 30
     days for free. If you continue to use this program, you must
     purchase the program for $20.00.

     Purchasers receive an enhanced version of the main macro, over a
     megabyte of Wood Clips graphics, newsletters announcing updates,
     and voice/FAX/email support.








     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           2

     Table of Contents
     =================

     INTRODUCTION & QUICK START  . . . . . . . . . . . . . . . . .   3
          SETUP  . . . . . . . . . . . . . . . . . . . . . . . . .   3

     ORDERS  . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
          ASP Ombudsman  . . . . . . . . . . . . . . . . . . . . .   4
          OTHER FILES  . . . . . . . . . . . . . . . . . . . . . .   5

     DEFINITION OF SHAREWARE . . . . . . . . . . . . . . . . . . .   6
          LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . .   6
          TRIAL USE LICENSE  . . . . . . . . . . . . . . . . . . .   7
          LIMITED DISTRIBUTION LICENSE . . . . . . . . . . . . . .   7

     WHAT IS GRAPHCAT? . . . . . . . . . . . . . . . . . . . . . .   9
          WORDPERFECT 8, 7, 6, OR 5.2? (NEW FEATURES)  . . . . . .  10
          VERSION HISTORY AND NEW RELEASES OF WP . . . . . . . . .  11

     PRINTING THE MANUAL . . . . . . . . . . . . . . . . . . . . .  12
          SAVING HARD DRIVE SPACE  . . . . . . . . . . . . . . . .  12

     PROMPTS . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

     THE OPTIONS DIALOG BOX & CD-ROM SUPPORT . . . . . . . . . . .  15
          STARTING FILE NAME . . . . . . . . . . . . . . . . . . .  15
          NUMBER OF IMAGES . . . . . . . . . . . . . . . . . . . .  15
          PAGE NUMBER  . . . . . . . . . . . . . . . . . . . . . .  15
          CD-ROM SUPPORT . . . . . . . . . . . . . . . . . . . . .  16
          IN GENERAL . . . . . . . . . . . . . . . . . . . . . . .  16

     EDITING AND PRINTING TIPS . . . . . . . . . . . . . . . . . .  18
          COLOR CLIP ART . . . . . . . . . . . . . . . . . . . . .  18
          HORIZONTALLY SQUASHED IMAGES . . . . . . . . . . . . . .  18
          WRAPPED FILE NAMES . . . . . . . . . . . . . . . . . . .  18
          LANDSCAPE PRINTING . . . . . . . . . . . . . . . . . . .  18
          SLOW PRINTING AND HALF-PAGE PRINT JOBS . . . . . . . . .  19

     TROUBLE-SHOOTER'S GUIDE--GRAPHCAT . . . . . . . . . . . . . .  20

     INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23










     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           3


     INTRODUCTION & QUICK START
     ==========================

     GRAPHCAT is a high-power clip art cataloger for WordPerfect, with
     support for partial catalogs, directory searching, and complete
     catalog layout control. GRAPHCAT uses all graphics supported by
     WordPerfect.

     GRAPHCAT requires WordPerfect for Windows, any version from 5.2
     through 8, running in Windows 3.1, Windows for Workgroups 3.11, 
     or Windows 95. A DOS version of Graphcat Clip Art Cataloger is
     available separately.

     Why should you use a clip art cataloger that runs where you use
     your clip art? So that you can see how your word processor will
     print your clip art. Modern clip art isn't all pictures--much of
     it contains mathematically-defined shapes and fill patterns and
     colors defined by numbers. Pull those files into other catalogers
     and they will transform into minor variations. Pull those files
     into Graphcat Clip Art Cataloger, and you'll see what your
     desktop publishing projects will look like.

     SETUP
     -----
     In each version of WordPerfect, go to a blank document screen,
     press Macro (Alt-F10), type the path to where the files are, and
     the macro name shown here, and press Enter.

     For WordPerfect 8 for Windows 95 or NT, type the path and
     'setup832' and press Enter.
     For WordPerfect 7 for Windows 95 or NT, use 'setup732'.
     For the 16-bit version of WordPerfect 7 for Windows 3.1, AND for
     WordPerfect 6.1, 6.0a, and 6.0, use 'setup67'.
     For WordPerfect 5.2 and 5.2+ for Windows, use 'setup52.wcm'.

     For example, to install Graphcat in WordPerfect 8, from a
     diskette in drive a, press Macro(Alt-F10), type 'a:\setup832',
     and press Enter.

     Next, run the main macro by pressing Macro, and entering
     GRAPHCAT. Answer the prompts for the drive and directory, file
     mask, catalog title, number of columns, and graphic height. The
     default values for columns and height allow 28 graphics per page,
     and there are default values for every entry (except the file
     directory in WPWin52), so you can just click on OK, NEXT or
     FINISH to accept the defaults as you learn the power that
     Graphcat brings to clip art catalogs.



     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           4

     ORDERS
     ======

     GRAPHCAT/Win v. 4.1 is marketed as shareware, or "Try before you
     buy" software. You may copy the Trial Edition and pass it on
     unchanged to other WordPerfect users. If you use the program for
     more than 30 days, you must purchase a copy. GRAPHCAT costs
     $US 20., and a variety of payment types are listed in the file
     ORDERS.TXT, including Visa, MasterCard, and American Express.

     Send registrations to:                  Or Phone or FAX to:
          Jerry Stern                        1-410-661-2224
          Science Translations               Email:
          PO Box 20234                       jerry.stern@graphcat.com
          Baltimore MD 21284-0234 USA

     Or order online at http://www.graphcat.com
     Add $2. shipping on all orders below US$30.
     Maryland residents add 5% sales tax.

     A thirty-day trial edition of Graphcat is available for
     downloading on our World Wide Web site and many shareware sites
     world wide. The trial version is limited to 50 images, and it
     adds various advertisements both on-screen and to the completed
     catalog. There just isn't room for the megabyte of Wood Clips
     Bonus Clip Art files that are included with the full edition.
     Purchasers also receive technical support, and newsletter
     notification of upgrades, with discounted upgrade pricing for
     registered users.

     Support is by mail, FAX, or phone, at the same address and phone
     number used for registration, or via the Science Translations
     home page at http://www.graphcat.com. Look in PRODUCTS.TXT for
     additional contact info.

          Jerry Stern is a member of the Association of Shareware
          Professionals (ASP). ASP wants to make sure that the
          shareware principle works for you. If you are unable to
          resolve a shareware-related problem with an ASP member by
          contacting the member directly, ASP may be able to help. The
          ASP Ombudsman can help you resolve a dispute or problem with
          an ASP member, but does not provide technical support for
          members' products. Please write to The ASP Ombudsman, at 545
          Grover Road, Muskegon, MI 49442, or send a CompuServe
          message via CompuServe Mail to: ASP Ombudsman 70007,3536.






     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           5

     OTHER FILES
     -----------

     In the VENDINFO.DIZ file, there is a list of the files included
     in this release of Graphcat for Windows. If any are missing or if
     the sizes and dates do not match that list, the package has been
     tampered with. Any additional files are not part of Graphcat. A
     current and complete copy is shipped to all purchasers of
     Graphcat.

     For more information, see these files:

     ORDERS.TXT     Order form for registering Graphcat for Windows
                    and other products.

     PRODUCTS.TXT   Product information and site licenses. Includes
                    other wonderful products from Science
                    Translations, including GRAPHCAT, FontKat, and The
                    Letterhead Kits, each available for both DOS and
                    Windows.

     The files with .WPG extensions are clip art. The patterns and
     styles vary greatly, and they are provided as handy files for
     testing GRAPHCAT. They are all Wood Clips samples, of a variety
     of subjects. When you register, your bonus disk will contain
     additional Wood Clips, and additional collections are available
     by subject.

     Corel, WORDPERFECT, and PRESENTATIONS are either trademarks or
     registered trademarks of Corel Corporations, Limited. Microsoft
     and Windows are registered trademarks of Microsoft Corporation in
     the USA and other countries.



















     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           6

     DEFINITION OF SHAREWARE
     =======================

     Shareware distribution gives users a chance to try software
     before buying it. If you try a Shareware program and continue
     using it, you are legally required to register. With
     registration, you get anything from the simple right to continue
     using the software to an updated program with printed manual.

     Copyright laws apply to both Shareware and commercial software,
     and the copyright holder retains all rights, with a few specific
     exceptions as stated below. Shareware authors are accomplished
     programmers, just like commercial authors, and the programs are
     of comparable quality. (In both cases, there are good programs
     and bad ones!) The main difference is in the method of
     distribution. The author specifically grants the right to copy
     and distribute the software, either to all and sundry or to a
     specific group. For example, some authors require written
     permission before a commercial disk vendor may copy their
     Shareware.

     Shareware is a distribution method, not a type of software. You
     should find software that suits your needs and pocketbook,
     whether it's Shelfware or Shareware. The Shareware system makes
     fitting your needs easier, because you can try before you buy.
     And because the overhead is low, prices are low also. Shareware
     has the ultimate money-back guarantee--if you don't use the
     product, you don't pay for it.

     LIMITED WARRANTY

     THIS SOFTWARE AND MANUAL ARE PROVIDED FOR EVALUATION ONLY, ON AN
     "AS IS" BASIS.  SCIENCE TRANSLATIONS DISCLAIMS ALL WARRANTIES
     RELATING TO THIS SOFTWARE, WHETHER EXPRESSED  OR IMPLIED,
     INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER
     SCIENCE TRANSLATIONS NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE
     CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE
     LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES
     ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE, EVEN IF
     SCIENCE TRANSLATIONS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGES OR CLAIMS. THE PERSON USING THE SOFTWARE BEARS ALL RISK
     AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE.

     This agreement shall be governed by the laws of the State of
     Maryland and shall inure to the benefit of Science Translations
     and any successors, administrators, heirs and assigns. Any action
     or proceeding brought by either party against the other arising
     out of or related to this agreement shall be brought only in a
     STATE or FEDERAL COURT of competent jurisdiction located in

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           7

     Baltimore County, Maryland. The parties hereby consent to in
     personam jurisdiction of said courts.

     TRIAL USE LICENSE

     Graphcat is NOT a public domain program.  It is copyrighted by
     Science Translations. This software and accompanying
     documentation are protected by United States Copyright law and
     also by International Treaty provisions.

     Science Translations grants you a limited license to use this
     software for evaluation purposes for a period not to exceed
     thirty days. If you continue using this software after the
     thirty-day evaluation period, you MUST make a registration
     payment to Science Translations.

     LIMITED DISTRIBUTION LICENSE

     INDIVIDUALS may distribute the trial edition of Graphcat to
     friends or associates, provided they charge no fees for this
     service, and they convey a complete and unaltered copy of the
     shareware version of this product.

     All other distribution is allowed only under the terms of the
     attached VENDINFO data record, which is hereby incorporated by
     reference. Any distribution satisfying all the distribution
     requirements expressed in that data record is hereby authorized.
     You may not distribute this product, modify it, or bundle it with
     other products except as specifically allowed therein. You may
     not use, copy, rent, lease, sell, modify, decompile, disassemble,
     otherwise reverse engineer, or transfer the licensed program
     except as provided in this agreement.  Any such unauthorized use
     shall result in immediate and automatic termination of this
     license.

     Permission to distribute the Graphcat package is not
     transferable, assignable, saleable, or franchisable.  Each vendor
     wishing to distribute the package must independently satisfy the
     terms of this limited distribution license.

     U.S. Government Information:  Use, duplication, or disclosure by
     the U.S. Government of the computer software and documentation in
     this package shall be subject to the restricted rights applicable
     to commercial computer software as set forth in subdivision
     (b)(3)(ii) of the Rights in Technical Data and Computer Software
     clause at 252.227-7013 (DFARS 52.227-7013).  The
     Contractor/manufacturer is Science Translations, Box 20234,
     Baltimore, MD 21284-0234.



     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           8

     Science Translations may revoke any permissions granted here, by
     notifying you in writing.  All rights not expressly granted here
     are reserved to Science Translations.

     You are encouraged to pass a copy of the evaluation edition of
     GRAPHCAT along to your friends for evaluation. Please encourage
     them to register their copy if they find that they can use it.
     All registered users will receive a copy of the latest version of
     GRAPHCAT, an enhanced edition of the GRAPHCAT macro, a megabyte
     of Wood Clips graphics, discounted upgrades, newsletter
     announcements of upgrades and new products, and technical support
     for at least one year.

     Site Licenses, volume discounts, and the newest registration
     information are in the file PRODUCTS.TXT.




































     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                           9

     WHAT IS GRAPHCAT?
     =================

     I've been collecting clip art for different projects. A small
     book, some newsletters, signs, and still more pictorial projects.
     I've drawn some, scanned some paper clip art, and bought some
     disks of pictures. I was beginning to lose track of which disk
     had what pictures. I needed an index, a printout of every graphic
     I had, so I could keep them handy for reference.

     The WPG files shipped with WordPerfect have their own printed
     picture indexes of art in the manual, but disks of PCX or GIF
     files from computer show rack vendors are escapees from that
     elusive paperless office we all keep hearing about. And clip art
     CD-ROMs are uneven; some of them are full disks of excellent art
     on related topics, but others are totally unrelated pictures.
     Worse, because there are several flavors of each of the graphics
     file formats, some files will not be recognized by WordPerfect,
     and will read as bad. Overall, clip art disks are worthwhile, but
     a printed index would help sort the good files from the fuzzy
     junk.

     And the commercial clip art isn't much better. Oh, the graphics
     are better, but the printed indexes are printed too small, or on
     newsprint, or are all mixed in with the pictures of every other
     graphic collection sold by that company.

     Meanwhile, my co-workers on a newsletter project wanted to see
     all their clip art. I kept their graphics on a separate disk, but
     they wanted paper copies to refer to, so they could tell me, "Use
     that butterfly picture from page two." I began to create a sample
     document, with every graphic shown, and the file names, and the
     disk titles, and immediately found that there was too much work
     involved. I had two options: I could delegate the job, or write a
     macro to do the job. Since I couldn't find anyone who would spend
     three hours to create the index for each disk, I wrote GRAPHCAT.
     It's a lot faster than an assistant; it only takes from a few
     seconds to a few minutes to complete the job, depending on the
     speed of the computer and the size of the graphics files.

     GRAPHCAT makes this task easy, so easy that nearly no effort is
     needed to create a new catalog for each directory or floppy of
     pictures. If the macro is told the drive and path of the files,
     the computer should do the rest.

     With just that information, the WordPerfect macro reads the
     appropriate directory, identifies the graphics files, sets their
     sizes, locations, and options in a catalog, and leaves that
     catalog ready to print. Once the catalog is built, you may
     preview it, print it, and save it if you want. However, I don't

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          10

     recommend saving these files because they will be slightly larger
     than the cumulative size of all the graphics in the directory.

     Since starting to catalog my clip art collection, I've found
     pictures I didn't know I had, and I've used some of those in new
     projects. Now that I don't have to hire extra help to create the
     listings, I can find the picture I want in no time, and, better
     yet, I can take the picture notebook with me to a co-worker, a
     client, or a conference, and I don't need to borrow someone
     else's computer and be at the mercy of someone else's operating
     system.


     WORDPERFECT 8, 7, 6, OR 5.2? (NEW FEATURES)
     -------------------------------------------

     Throughout this manual, when the keystrokes and procedures are
     the same for all WordPerfect versions, the steps will be listed
     only once. However, when the steps are different, you will see
     this:

     WPWin52: Do these steps in WordPerfect for Windows 5.2 or 5.2+.

     WPWin6/7: Or these in WordPerfect for Windows 7.0, 6.1 6.0a, or
          6.0, in the 16-bit versions designed for Windows 3.1.

     WPWin32: Or these in the 32-bit editions of WordPerfect 7 or 8
          for Windows, running in Windows 95 or Windows NT.

     WPWin6/7 has greatly enhanced macro power, so there are a few
     features available in the WPWin6 version of Graphcat that are not
     in the 5.2 edition. Similarly, the WPWin32 editions of
     WordPerfect add support for Windows-95-style long filenames.

     The WPWin6/7 version has these enhancements:
     1) The file directory to search can be selected by clicking on
          the file icon, and double-clicking on the directory name. 
     2) The extra options screen allows partial file catalogs for
          inventorying large directories of clip art. 
     3) Horizontal-format catalogs (left-to-right) are available as an
          option in WPWin6. 
     4) Online help. 
     5) Small margins may be selected to shrink page margins to 1
          centimeter (about 4/10ths of an inch) all around.

     The WPWin32 version has all the enhancements above, as well as
     support of long filenames for your graphics, shown as endnotes.




     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          11

     Every question has a default setting in Graphcat for Windows. For
     the easiest use of Graphcat, type the file path at the first
     prompt, and press [Enter]. Graphcat will handle everything else.

     GRAPHCAT should work properly with ANY WP/Win language module.
     However, I have not been able to test every possible
     international combination of software and hardware. Please write
     if you find that GRAPHCAT fails in any way on your system.

     VERSION HISTORY AND NEW RELEASES OF WP
     --------------------------------------

     Writing software in a macro language is like controlling a
     rowboat by towing it from a distance of five parsecs. GRAPHCAT
     should work in all future interim or patch releases of the
     WordPerfect versions supported. However, sometimes new "features"
     disable old features. When this happens, try turning "off" the
     new features if GRAPHCAT doesn't seem to like the new release.
     Better yet, call or write for support--there will be either a fix
     or a new release, as needed, to fix any problems caused by new
     features. For example:

     NEW IN 4.1
     ----------

     Added support for Corel WordPerfect Suite 8 for Windows 95 and
     NT, and for the 16-bit edition of Corel WordPerfect Suite 7 for
     Windows 3.1. For users of WordPerfect 6 and above, added online
     help, and a new layout feature: Small Margins.

     The default setting for the 'Filenames to find' or file mask has
     changed from the old conservative setting of '*.WPG' to '*.*'.
     Please use it reasonably. Don't use it to catalog non-graphics
     files in hopes of finding more graphics--loading every file in a
     directory just slows WordPerfect down.


     NEW IN 4.0
     ----------

     Support for WordPerfect 7.0, including long filename support.
     The default settings have changed: In WPWin6 & 7, Graphcat now
     defaults to the "Graphic on disk" selection, and the default
     catalog is now set at 100 images (28 in evaluation edition).







     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          12

     NEW SINCE VERSION 3.2
     ---------------------

     Those users who use more than four columns in their catalogs
     sometimes find that the image names wrap or hyphenate to two
     lines, throwing off the neat line-ups of images on the page.
     Graphcat running in WPWin6/7 or WPWin32 automatically shrinks the
     base font for the document to make it fit into one line. The
     point size of the page title is not affected. Non-scalable fonts
     can also be auto-adjusted; Graphcat adds the small or fine
     attributes as needed.

     Due to feature changes in WPWin60 interim release "a" and after,
     versions of Graphcat 3.0 and 3.01 will fail before completing any
     catalog pages. That compatibility issue has been allowed for in
     versions 3.1 & above of Graphcat.

     Also fixed are incompatibilities from version 3.00 with full
     justification in default initial codes, as seen in some UK
     editions of WPWin60, and error messages that appear when the
     older Graphcat was used with the Share program, noted mostly by
     users of MS Excel.


     PRINTING THE MANUAL
     ============

     If you are reading these files on screen, you may print a manual
     with the PRINTDOC.BAT batch file. (Don't print them from
     WordPerfect--the text version is formatted with page breaks for
     printing from DOS, and the Help file version prints one topic per
     page.) A Windows-based deluxe manual may also be available when
     you read this--look in the shipping disk's !README.TXT file for
     more information, or on our web site.
       
     The easiest way to run the PRINTDOC batch file is to go to DOS by
     double-clicking on the MS-DOS prompt icon, usually installed in
     the Accessories group. (Type EXIT when ready to return to
     Windows.) In Windows 95, press START, and choose MS-DOS prompt;
     it's usually in the Programs menu.

     From the DOS prompt, log to the directory holding the Graphcat
     distribution files, type PRINTDOC, and press ENTER. 

     SAVING HARD DRIVE SPACE
     -----------------------
     For each edition of Graphcat, there are two or three files that
     must remain on your hard drive to be used. If you install more
     than one version, each version of WordPerfect will have its own
     files. These files are GRAPHCAT.WCM (for all editions),

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          13

     GRAPHCAT.DLL (for WordPerfect 16-bit versions), GRAPHCAT.EXE,
     (for WordPerfect 32-bit versions), and GRAPHCAT.HLP (for
     WordPerfect versions 6 and above). The SETUP macros will copy
     those files for you, and will also create a directory for the
     optional clip art samples and instruction files. These routines
     will copy the samples and TXT files to any location you wish.

     The clip art images and TXT files need not remain on your hard
     disk once you have become comfortable with running the software.
     The macros and `DLL' or `EXE' and the help file must remain in
     the WP/Win macro directories.


     PROMPTS
     =======

     Start GRAPHCAT by pressing Macro (Alt-F10), typing GRAPHCAT, and
     pressing Enter. You must have at least two document screens
     available, but not to worry: GRAPHCAT checks for work space and
     will not let you do anything dangerous. A full-screen dialog box
     will appear, asking five questions. All of these questions are
     optional, and allow you to customize your catalogs.

     At the first prompt, enter the drive name and path for the
     subdirectory to be searched. You may omit the ending backslash if
     you like. GRAPHCAT is smart enough to accept the path name either
     way. Pressing Cancel (Esc) or clicking the Cancel button at any
     time will end the macro.

          The file directory to search can be selected by clicking on
          the file icon, and double-clicking on the directory name.

     The second prompt asks for the file mask. Any type of graphics
     file readable by WordPerfect may be entered here. What's a file
     mask? The simplest file mask is the famous "*.*" which means the
     files with any name and any extension. The asterisk substitutes
     for any group of characters, and a question mark substitutes for
     any single character. The period is required.

     For example, to inventory all the WPG clip art in a directory,
     use a file mask of "*.WPG" or to find all the files starting with
     "BIG-" use "BIG-*.*" as the answer at the second prompt. If you
     leave this prompt blank, Graphcat will look at "*.*" or all the
     files in the directory.

          It's very easy to just enter *.* as the file mask and try to
          search every file in a directory for graphics. Don't do it!
          The wild card extension is intended for cataloging mixed
          disks of graphics files. If you use the *.* choice for
          directories containing program files, GRAPHCAT will run far

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          14

          more slowly, because it must load and identify as bad every
          program file in the directory. For best and fastest results,
          use the real file mask of the graphics you are looking for,
          unless you really do intend *.* to mean ALL the files in the
          directory.

     The third prompt asks for a title, and the macro will place that
     title in a header on each page of the catalog. I recommend
     entering the name of the graphics collection or the name of the
     archived backup for that collection, such as "Business Graphics--
     BUSINESS.ZIP" in this area. You may leave this prompt blank if
     you wish, and Graphcat will create a title for you, reading "Clip
     Art in " and the file path and mask from the first two prompts.

     The next two prompts request the number of columns and the height
     to make each graphic. WordPerfect will calculate the width to
     keep the graphics true to scale, room permitting. If less than
     about twice the height of a graphic is available for the width,
     some graphics in horizontal format will be compressed to fit the
     column. For four columns, a height of about one inch or 2.5 cm 
     allows ample room, and 28 images fit on one page. Some of the
     best combinations of columns and image heights are displayed near
     the right side of the dialog box.

          INTERNATIONAL USERS: GRAPHCAT needs to know how tall you
          would like your graphics printed in your catalog. That
          measurement is entered in inches if the language WordPerfect
          detects is US English. For all other languages, including
          other varieties of English, centimeters are used
          automatically. If you would like to use a different
          measurement, you must add a measurement identification
          letter after the number, using the standard WordPerfect
          abbreviations. For example, i or " for inches, c for
          centimeters, or p for points.

          WPWin32: GRAPHCAT now uses a counter control to allow you to
          click the image height up or down, and that control is set
          in inches if you are running US English, and centimeters
          otherwise.

     Once the last entry has been made, click on OK or NEXT, and
     GRAPHCAT will go on to the Options menu. As each graphic is
     loaded, the macro announces the new graphic on the bottom line of
     the document screen.







     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          15

     THE OPTIONS DIALOG BOX & CD-ROM SUPPORT
     =======================================

     Graphics collections have gotten very large. I frequently hear
     from customers that they have several thousand images in one
     directory, and that they want to inventory that one big directory
     as one group. That is impractical for many reasons, but the most
     important reason to break a catalog up into pieces is that you
     cannot expect WordPerfect to run smoothly with ten megabytes of
     image files in its document memory. It just won't happen.

     You can create a partial catalog in WordPerfect 6 & above by
     entering your choices on the options menu, which will appear
     automatically once you complete the first dialog box. The menu
     has three items to fill in. In most cases, you will be able to
     click on OK immediately without making any changes here.

     STARTING FILE NAME
     ------------------

     This is the file name to begin the catalog with. You may manually
     type in the name of the image, or you may choose the name from a
     file list (recommended!) by clicking on the file icon or by
     pressing Alt-Down Arrow.

     You may also enter a partial file name here. For example, to
     start the catalog with the first image starting with the letter
     "G", you would just type that letter here.

     This box will start out as blank the first time that you run
     Graphcat in a directory, or the first time in a WordPerfect
     session. However, if you run Graphcat again in the same
     directory, this box will automatically hold the next file name to
     catalog, if the last catalog was of fewer graphics than those
     remaining in the directory.

     NUMBER OF IMAGES
     ----------------

     Select how many images to catalog here. The default is 60, but
     you will probably choose to catalog your images in groups of 56
     (2 pages of 28 images in 4 columns) or some other number that
     will fill a set of pages. This number will carry over from one
     run of Graphcat to the next, within the same WP session.

     PAGE NUMBER
     -----------

     Select what page number to use for the first page of the catalog.
     If you are cataloging the same directory as a previous run,

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          16

     Graphcat will provide a default choice of the last page that was
     created, plus one.

     CD-ROM SUPPORT
     --------------

     For cataloging a large group of files, and especially for CD-ROM
     clip art disks, set Graphcat to catalog as many images as will
     fill one page, or a multiple of pages, with no partial pages.
     Print the catalog normally when done, and restart Graphcat. Press
     (Enter) at both screens, and Graphcat will prepare the next set
     of images, creating a catalog of the same size as the first, and
     starting with the next image to be cataloged, and the next page
     number. Graphcat can work all the way through a CD-ROM in this
     way, simply by breaking up the catalogs into printable sizes.


     IN GENERAL
     ----------

     If GRAPHCAT and WordPerfect decide that a graphic in your sample
     directory is not a proper graphics file, GRAPHCAT will add that
     file name to a list of files that could not be loaded, and that
     list will be printed at the end of the catalog. You may delete
     that message after the catalog is prepared, or you may try to
     convert the bad graphic or edit it with a graphics program,
     resave it, and run GRAPHCAT again. Because not every version of
     every graphic format is supported by WordPerfect, I prefer to
     leave the file list in the catalog to identify a file that may be
     usable in other software, but not in WordPerfect. (Or the disk
     may contain non-graphic files, such as a README.DOC, and these
     files will be listed automatically at the end of the catalog.)

     When the catalog is finished, a dialog box will appear to let you
     know. From this point on, the catalog is just a complex document,
     and you may edit it or print it as you would any other large
     document.

     GRAPHCAT may be stopped in mid-inventory by pressing Cancel (Esc)
     just once; there may be a time lag of a few seconds before the
     macro stops. If you use Cancel to stop GRAPHCAT, the macro will 
     warn you that the catalog is incomplete.

     GRAPHCAT has error trapping routines built in to prevent garbage
     entries, and to turn off Reveal Codes if needed, and will not try
     to run if you start them without sufficient work space. If you
     wish to import the catalog into a document, run the macro first,
     and then merge the other text or formatting into the catalog.



     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          17

          In general, Graphcat can create a larger catalog of
          graphics than WordPerfect can print. The maximum
          catalog size for each user will vary greatly, depending
          mostly on memory. Try not to catalog more images than
          will fit in memory. Although WordPerfect will use disk
          space as extra work space after memory is full,
          performance and speed will drop dramatically, and your
          results will be both faster and more reliable if you
          split large catalogs up into several separate mini-
          catalogs.









































     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          18

     EDITING AND PRINTING TIPS
     =========================

     COLOR CLIP ART
     --------------
     WordPerfect for Windows 5.2 does not support color while using a
     WordPerfect printer driver, unless the printer uses color
     Postscript. For any other color printer, a color catalog of clip
     art is available, but you must use a Windows printer driver to
     print in color on non-Postscript color printers. WPWin6 & above
     support color on most color printers.


     HORIZONTALLY SQUASHED IMAGES
     ----------------------------
     If your images appear to be squashed horizontally when you print
     or preview, you need to use either fewer columns or a smaller
     image height. To change the height of the images, clear the
     document and restart GRAPHCAT. You can change the columns without
     rerunning GRAPHCAT, but if you are not comfortable with using the
     Reveal Codes feature, it may be easier to simply run Graphcat
     again with the new columns setting than to edit the completed
     document. First, press Ctrl-Home to reach the extreme top of the
     document, before any codes. Turn on Reveal Codes (Alt-F3), and
     look for a code that looks like this:
     [Col Def: Newspaper...

     Place the cursor immediately after that code, and press Layout,
     Columns, Define from the menu. Change the number of columns and
     click on OK. You may now delete the first of the two column
     definition codes, turn off Reveal Codes (Alt-F3), and check your
     document by printing or previewing again. The images should no
     longer be squashed, but with extremely wide images, you may need
     to try still fewer columns, or perhaps none at all.

     WRAPPED FILE NAMES
     ------------------

     When using more than four columns in WP52, long graphics names
     may wrap to the next line, reducing the number of graphics that
     fit on a page. If the names wrap, reset the base font to a
     narrow, condensed, or thin typeface, using Layout, Document,
     Initial Font, choosing a smaller font, and clicking OK when done.


     LANDSCAPE PRINTING
     ------------------

     If GRAPHCAT detects any codes in your document, even a page
     definition, it will open a new document before creating your

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          19

     catalog, and the document you started from will be left
     unchanged. So if you need a graphics catalog on a page size that
     is not your default paper size, such as a landscape version of A4
     or 8 1/2" x 11", then follow these steps:

     First, run GRAPHCAT normally. Choose one column so that GRAPHCAT
     will not insert a column definition code. Next, press Ctrl-Home
     to go to the top of the document. If you have turned off the Auto
     Code Placement option in Preferences, you must also use the left
     arrow key to position the insertion point before ALL of the
     formatting codes. Select your paper size from the list available
     after choosing Layout, Page, Paper Size. Click on Select when
     done.

     Next, add column codes, by choosing Layout, Columns, Define,
     entering the number of columns, and clicking OK. You may also
     wish to reduce the space between columns at the Distance Between
     Columns menu choice. Choose Layout, Columns, Columns On to turn
     on columns, and then press Ctrl-End to go to the bottom of the
     document. WordPerfect will reformat your document as it travels.
     Your document is now ready to edit, view, or print normally.

     SLOW PRINTING AND HALF-PAGE PRINT JOBS
     --------------------------------------

     A page full of graphics will print slowly, and most laser
     printers do not come equipped with enough internal memory to
     print a complex catalog at the highest resolution settings. On a
     laser printer, if the entire page does not print, try printing
     the page at a lower setting for graphics quality, or use fewer
     columns. Again, note that reducing the size of a graphic does not
     reduce the complexity of the print job, so a page with one column
     of larger graphics will print more quickly than a page containing
     several columns of small graphics.

     The newer laser printers frequently use standard SIMM modules, so
     adding memory can be very cheap--check the printer manual to see
     if it requires a proprietary cartridge or a standard SIMM. Adding
     4 Mb of RAM to a printer is usually fine for letter-sized
     printouts with full-page graphics at 600 dots per inch.











     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          20

     TROUBLE-SHOOTER'S GUIDE--GRAPHCAT
     =================================


     1) "I can't run my macros anymore in WordPerfect 7 for Windows
     95. It started when I tried to run them in WordPerfect 8."

     WordPerfect 8 will, under certain conditions, ERASE the contents
     of a WordPerfect 7 macro, usually when it thinks that the macro
     must be recompiled. Reinstall Graphcat from the original shipping
     disk. You can identify damaged macros by their file size, which
     will always be about 2 K.

     2) "In WPWin32, some of my image captions are all UPPER case, and
     some are Mixed Upper and lower case. These files are saved with
     regular DOS 8+3 (filename.ext) filenames."

     No. They're not. A legal 8+3 filename is always all upper case.
     However, when you started using Windows 95, and thought you were
     saving files with legal MS-DOS filenames, Windows 95 was busily
     saving them as you typed them, in lower case, or with a
     capitalized first letter, like Filename.wpg. Windows 95 feeds as
     all caps to 16-bit programs like WordPerfect 5.1 or 6.1, but
     WordPerfect 7 and Graphcat 4.0 can read the mixed case names.

     GRAPHCAT handles long filenames like this: If the Windows 95
     "long" filename is the same length as a DOS filename, of 12
     characters or less, it uses that filename as the image caption.
     If it is longer than 12 characters, it uses the DOS version of
     the name (LONGFIL~.TXT) for the caption, and places the full-
     length file name in an endnote.

     3) "Whoa! I just upgraded to WP7 and the new Graphcat from an
     earlier Graphcat in another WP, and now my catalogs look
     different!"

     Sometimes, yes. Vertical-format catalogs have changed from
     Newspaper-style columns, that fill each column before going on to
     the next, to BALANCED Newspaper columns, where WP 7 attempts to
     keep all the column lengths the same on each page. It succeeds
     most of the time, but not always. For catalogs of more than one
     page, only the last page looks different.

     Why the change? Easy enough. The endnotes needed to list long
     filenames don't work well in Newspaper columns, unless you LIKE
     reading filenames that are hyphenated four or five times. 

     If your catalog doesn't contain any long filenames, you can
     easily change it back to Newspaper style: just run Graphcat
     normally, and then go to the top of the catalog, turn on Reveal

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          21

     Codes (Alt-F3), double-click on the code starting with '[Col.Def'
     and click on the top selection of column types, Newspaper, and
     then on OK. You might need to go down to the bottom of the
     catalog once (Control-End) to convince WP to reformat the pages.

     Other appearance changes may occur, based on the version of
     WordPerfect you are running. In WordPerfect 8, graphics borders
     generally expand to fill the column. That's not useful, but is
     caused by a bug in WP 8's macro language, and no workaround has
     been found to date, other than selecting 'None' for the border
     selection.

     4) "GRAPHCAT loads properly, and the big box appears on screen,
     but once I click on OK, an error message appears telling me that
     the macro could not find the DLL or EXE file."

     GRAPHCAT.EXE is needed by the 32-bit versions of Graphcat, and
     GRAPHCAT.DLL is needed by the 16-bit versions. You must run the
     SETUP macros to place these files in the WP macro directories. No
     other location will do. See the installation instructions on page
     3 for help.

     5) "GRAPHCAT runs perfectly, but I cannot print the result file.
     The error messages say I don't have enough disk space, or that
     the swap file is full, or WPWin7 says a memory error has
     occurred."

     This can happen if you are trying to catalog a large file of clip
     art, and you have very little memory or hard disk space available
     for WordPerfect to work in. To fix it, from the Windows Program
     Manager, highlight the WP icon, and choose File, Properties. If
     you have another hard drive partition available with more space,
     such as D: or E:, change the Working Directory prompt to that
     drive, click on OK, and restart WordPerfect. If there is no other
     partition, you will need to move or delete unneeded files from
     your hard disk to free up some work space.

     In WPWin6 or above, you should try breaking the catalog into
     page-size chunks; see the Options Menu instructions. Setting the
     graphics quality to medium or draft also helps reduce the amount
     of data that must be handled for each page, and eliminates some
     problems.

     Remember that printing images smaller does NOT reduce the amount
     of memory they use during printing. A page containing fewer large
     images is easier to print than one with many small images.

     6) "Sometimes when I use the *.* file mask, GRAPHCAT loads a file
     as a graphic that isn't one. The document loads and prints
     normally, but the box is either empty or contains a random

     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          22

     pattern. Or, and much worse, WordPerfect progresses partially
     through the catalog, asks for a password, and then crashes with a
     General Protection Fault (usually WPWIN52)."

     Both conditions are caused by trying to use the *.* file mask
     option inappropriately. The * wild card choice was intended for
     reading disks containing mixed graphics in different formats,
     such as WPG and GIF and JPG graphics mixed together, NOT for
     attempting to load every program file on your hard drive in the
     attempt to see if any of them are graphics. Graphcat will
     correctly identify nearly every file as a graphic or not a
     graphic, but there are exceptions.

     The General Protection Fault does not occur often, unless an odd
     combination of factors is present, such as a bad file combined
     with either the SHARE command in use, or a Hyphenation ON code in
     the Document Initial Codes area of Preferences. Solution: Don't
     run SHARE unless you are running software or hardware that
     specifically demands it, such as some network packages. Or remove
     that Hyphenation code from Document Initial Codes.

     To avoid these problems altogether, when cataloging a directory
     of mixed graphics and program files, use the appropriate file
     mask, such as *.PCX or *.WPG on the second line of GRAPHCAT's
     menu, and save the wild card use for disks holding almost
     entirely graphics.

























     All Rights Reserved                (C) Copyright 1997 Jerry Stern




     G R A P H C A T ( Windows )    V. 4.1                          23

     INDEX
     =====

          ASP Ombudsman . . . . . . . . . . 4
          bonus . . . . . . . . . . . .  4, 5
          caption . . . . . . . . . . . .  20
          color . . . . . . . . . . . . .  18
          columns . . .  3, 12, 14, 15, 18-20
          Corel . . . . . . . . . . . . 5, 11
          DLL . . . . . . . . . . . .  13, 21
          editing . . . . . . . . . . . .  18
          endnotes  . . . . . . . . .  10, 20
          error messages  . . . . . .  12, 21
          Evaluation Edition  . . . . . 8, 11
          font  . . . . . . . . . . .  12, 18
          General Protection Fault  . . .  22
          GIF . . . . . . . . . . . . . 9, 22
          interim release . . . . . . . .  12
          International . . . . . . 7, 11, 14
          Internet  . . . . . . . . . . . . 1
          JPG . . . . . . . . . . . . . .  22
          landscape . . . . . . . . .  18, 19
          laser printers  . . . . . . . .  19
          long filenames  . . . . . .  10, 20
          margins . . . . . . . . . .  10, 11
          memory  . . . . . .  15, 17, 19, 21
          Presentations . . . . . . . . . . 5
          PRINTDOC.BAT  . . . . . . . . 1, 12
          registration  . . . . . . .  4, 6-8
          SETUP . . . . . . . . . . 3, 13, 21
          shareware . . . . . . .  1, 4, 6, 7
          tips  . . . . . . . . . . . . .  18
          trouble . . . . . . . . . . . .  20
          VENDINFO.DIZ  . . . . . . . . . . 5
          Wood Clips  . . . . . .  1, 4, 5, 8
          WPG . . . . .  5, 9, 11, 13, 20, 22
          WWW . . . . . . . . . . . . .  1, 4














     All Rights Reserved                (C) Copyright 1997 Jerry Stern
