RunPager CD	Phone Call Detour, Call For Free
		Information Sheet 1 - Phone Call Detour
		(c) Copyright 1997 RunPager Software Engineering

----------------------------------------------------------------

General Specifications: Call Back Software

	This program uses the three way calling feature offered 
by your telephone company to originate all of your calls in your
residence or business no matter where you are calling from. 

	1) You can make free local pay phone calls.

	2) You can make 800 number calls from a pay phone without
incurring pay phone charges.

	3) You can originate your cellular, pay phone, and
credit card calls in your home or business reducing your long 
distance rates for these calls from $.20 or $.25 per minute 
to $.10 a minute or less.

	4) Overseas international callers can originate their
calls in the United States saving substantial amounts since it is 
much cheaper to place calls outbound U.S. rather than inbound U.S.

	5) You can make multiple calls from one connection.

	6) Extensive remote user tele-keypad commands to alter the
setup online (-See And Print "Shell Commands" Menu Item)

	7) The program restarts on power down/up sequence and 
runs in background or foreground maximized or minimized with the 
monitor turned on or off.

----------------------------------------------------------------

How it Works

	You call the computer or have the computer call you
back after a predetermined ring-hangup signal or caller-id and\or
a multi-ring detected call.

	After voice connection with the computer you have it
place calls for you using the telephone keypad and the three-way 
calling service offered by your telephone company.

	In this way all of the calls you make are charged at the
rate of your residence or business long distance carrier which are
substantially less than cellular, credit card, or pay phone calls.

	If you have the enhanced three-way call transfer option, 
available from some phone companies, the computer drops out of the 
conference as soon as you are connected to your party making it 
available to another user.

	The ring-hangup-signal may be employed in conjunction with
caller-id or multi-ring\distinctive ring service as an option in 
pin pointing the call detection operation and providing a variable
call-back number.

	While caller-id and multi-ring service are not required,
three way calling service is necessary for operation of this app-
lication.

----------------------------------------------------------------

System Requirements

	An Intel xxx86 based PC running the Microsoft Windows 
Operating System, Version 3.1 or greater. 

	This program requires a voice capable speaker phone 
modem and three-way calling service from your telephone company.

	The Visual Basic Runtime module VBRUN300.DLL must first 
be installed in your Windows\System directory.  You can download 
it at any of the major shareware libraries on the world wide web.

----------------------------------------------------------------

Software License Agreement

	Please see and read the AGREEMENT carefully (Order Info).

----------------------------------------------------------------

Evaluation Software

	The evaluation version of the software will run for about
one hour at a time, display a message, then drop out of "Auto-
Supervision" mode.  This allows you to fully test the program's
functionality before making a purchasing decision.  The purchased 
version of the software has, of course, no such limitation.

----------------------------------------------------------------

Getting Started

	Run the SETUP.EXE executable from the File Manager or 
Program Manager.  If you are loading over an older version of the
software, first delete the old "runpgrcd" directory.

----------------------------------------------------------------

Setting Up The Application

	There are three setup forms in this application and each
has an information sheet to help you to understand the program's
setup and operation.  They are: 

	1) The call routing form
	2) The modem configuration form
	3) The speaker phone commands form

	You should print the telephone keypad commands: 
"Shell Commands" to have as a reference.

From the "Setup" menu select the "Modem Configuration" form

1) 	Make sure a comm port is selected, press "Auto Configure".

From the "Setup" menu select the "Speaker Phone Commands" form	

2)	Make sure the caller-id function works, press the
"Test Modem Caller-ID" button.
	If the test fails then you will have to find the speaker
phone and caller-id commands from your modem manual selecting
"Other" as the Modem IC Manufacturer.

From the "Setup" menu select the "Multi-Call Routing" form

3)	Enter a password, 4 to 8 digits,
	Enter a call back phone number >= 7 digits
	Enter the area code for your computer's location
	Make sure the minimum operational requirements are met,
press "Check Requirements"

If all is well, then print and read the manual to gain an 
understanding of the programs operation.  Select the appropriate
options and ... 

Now you're ready to test

----------------------------------------------------------------

Emergency Hangup

	Testing facility to hangup a stuck open modem line if all
does not go well.

----------------------------------------------------------------

Auto-Start Supervisor

	If checked, the application will enter "Supervision Mode"
as soon as it starts.

----------------------------------------------------------------

Shell Commands

	Shells the remote telephone keypad commands to "notepad"
for viewing or printing.

----------------------------------------------------------------

Shell Current Session

	Shells the current list of session activities to "notepad"
for printing or viewing.

----------------------------------------------------------------

Clear History File

	Removes all of the call history records from the text file
"runpgrcd.hst".

----------------------------------------------------------------

Shell Call History

	Shells the call history file to "notepad" for viewing 
and\or printing.

----------------------------------------------------------------

Removing Installed Components

	Use Program Manager Delete to remove the "RunPager" 
program group and icons.

To remove installed components use your File Manager to delete:
	- From Windows\System Directory:
		rpmscomm.vbx	Renamed MSComm VBX
		rpthreed.vbx	Renamed Threed VBX	

	These were renamed to prevent version conflict if you 
have a different version of Visual Basic loaded.

	- If you don't have Visual Basic delete:
		vbrun300.dll	Visual Basic Run Time DLL

	- Delete the RUNPGRCD Directory along with all of it's 
files.

----------------------------------------------------------------

Ordering Information

	If you have reviewed this product I would appreciate your 
comments, whether favorable or not.  Please e-mail your comments, 
questions, problems, bugs, or suggestions to: 

	runpager@neont.com

	You may check the following URL for updates and additions 
or price changes to the product:

http://www.bsoftware.com/cgi-bin/fetchsan.cgi?AuthorID=528,LocationID=1

----------------------------------------------------------------

Orders From Outside The United States

	Please send monies in U. S. Dollars such as CERTIFIED BANK 
CHECKS made out to Bob Johnson.  Please include enough to cover 
shipping costs where required.  Orders that are software only may 
be distributed via file attatched e-mail.

----------------------------------------------------------------

Speaker Phone Modem Purchase

	WyseCom 33.6 Rockwell based voice\data\fax internal modems 

are available for $75.00 thru earl@earl.net.

----------------------------------------------------------------

Custom Programming

	Contact Bob Johnson: 	runpager@neont.com
				1824 Point View Avenue
				Youngstown, Ohio 44502
				USA
				(330)788-3073