RunPager CD	Remote Telephone Keypad Commands
		(c) Copyright 1997 RunPager Software Engineering
Keypad Command	Results	(Print And Carry With You)
--------------	--------------------------------------------------
*		Clears Key Entry, Resets Call Length Timer
#		Concludes Telephone Key Entry
*#		Clears All, Resets Command Input Selection

**		Enter Transparent Mode, "*" & "#" Do Not Control
##		Leave Transparent Mode, "*" & "#" Control As Above 

(Start Every Key Entry With "*", End Every Key Entry With "#")

*nnnn#		Enter Password, If Used, Must Be 4 To 8 Digits
		eg. *1234# For Password 1234

*nnnnnnnnnnn#	Issue Third Party Call To Number nnnnnnnn ... n
		eg. *11234567890# For Number 1-123-456-7890

*nnn#		Issue Speed Dialing Third Party Call
		Speed Dialing Selections Must Be 3 Digits Long
		eg. *001#, *002#, *003#, and like that

*0#		Normal Termination Of Current Call Connection

*1#		Set Mode To Answer Immediate
*2#		Set Mode To Answer After Ring Hangup
*3#		Set Mode To Call Back After 1st Ring Hangup
*4#		Set Mode To Call Back After 2nd Ring Hangup

*5#		Changes Call Back Number To Next Number Entered
		eg. *5# *5551234# Changes Call Back To 555-1234

*6#		Changes Default Carrier Access No To Next Entry
		eg. *6# *12345# Changes Carrier Access To 12345

*7#		Changes Password To Next Number Entered
		eg. *7# *1234# Changes Password To 1234

*8#		Changes Maximum Call Length Timer To Next Entry
		eg. *8# *1234# Changes Max Call Length To 1234

*9#		Issue Hookflash To Hangup Third Party Call

*10#		Enable 	System Beeps On Keypad Entry Procedure
*11#		Disable System Beeps On Keypad Entry Procedure

*12#		Enable 	Default Carrier Access Number Insertion
*13#		Disable Default Carrier Access Number Insertion

*14#		Enable 	Enhanced Conference Call Transfer Mode
*15#		Disable Enhanced Conference Call Transfer Mode

*16#		Enable 	Caller-ID Call Detection Operations
*17#		Disable Caller-ID Call Detection Operations

*18#		Enable 	Mult-Ring\Distinctive Ring Call Detection
*19#		Disable Mult-Ring\Distinctive Ring Call Detection

*20#		ByPass Call Transfer Mode For The Next Call
		The Computer Will Not Hangup After Dialing The Call

*99#		Emergency Hangup

Please Note:	All Commands Are 1 Or 2 Digits In Length.  
		Speed Dialing Selections Are 3 Digits Long.  
		All Other Entries Must Be >= 4 Digits In Length.

		To Enter Dial Tone Digits To A Telephony Device
		Press "*" Both Before And After The Entry.
		eg. *12345* 
			Or 
		Enter Transparent Mode Where Both "*" and "#" 
			May Be Entered As Non-Control Chars.

		Normally when you enter a number and are connecting
		to a your party you will be able to hear the digits
		being dialed, but if the line is busy you will not
		hear any dialing.