








                          S m a r t S e n d   V 1.1

                            written by Greg Kacy

       Program and Documentation Copyright (C) Greg Kacy Software
                            All rights reserved



                            T H I S  I S  T H E
        U N R E G I S T E R E D  S H A R E W A R E   V E R S I O N   ! ! !








          Microsoft and MS-DOS are registered trademarks, and Windows
                    is a trademark of Microsoft Corporation.
          Novell and NetWare is registered trademark of Novell,Inc





  Introduction
-----------------

  SmartSend is nice little application for all of you who use Novell
  NetWare based LAN and MS WINDOWS. SmartSend allows to send messages
  between LAN users in a nice and easy way. It supports predefined user
  messages (user can add his own standard messages) and also...it allows
  to change the senders name (only in registered version). It means that
  you could send messages to someone at your office as: YOURLOVER or MANAGER.


  Hardware and software requirements
--------------------------------------

  SmartSend requires Microsoft Windows V3.0 or later, Novell Netware 2.0
  or later, at least PC 286, 2MB RAM and HD.



  Installation
 -----------------

  To install SmartSend on your system copy all the files listed below to one
  directory (for example to your WINDOWS directory).

     Files:      ssend.exe     - The executable file (Shareware)
                 ssend.dat     - Data file with defined messages and sender's
                                 names
                 ssend.txt     - This file
                 orderfrm.txt  - Order form


  It is important that ssend.exe and ssend.dat remain in the same directory.
  You should not rename these files.

  After you have copied all the files, it's time to place SmartSend in one
  of your Program Manager groups and then double-click on the SmartSend icon
  to run the program.



  Using SmartSend
 -----------------

  SmartSend is a MS WINDOWS application. Use a button panel to navigate
  SmartSend (You also can use shortcut keys). To get help, click on the
  help button.
  SmartSend screen consists of button panel, user list box, message
  edit-combo box and status bar.

  The user list box show always logged-in users. You can select a user(s) by
  clicking his name. Selected users will receive your message.

  Message can be entered in message edit box or one of the standard
  messages can be picked up from the list of a combo box.

  Then just press send button (the one with phone) and that's it!!!
  Message was sent....

  To add or edit you standard predefined messages (and sender names) just
  edit ssend.dat with any ASCII text editor (like Notepad).
  In the section [Messages] add or edit appropriate messages and in the
  [Senders] appropriate sender names.

  It is important that message definition starts with 'msgN' where 'N' is a
  number between 1 - 99. Numbers should be continuous.

  example:
             msg3=Hi Jenny ! How about dinner tonight ?

  The sender's name definition should start with 'sndN' where 'N' is a number
  between 1 - 50. Numbers should be continuous.

  example:
            snd1=YOURLOVER

  Note: Sender's name should have max. 10 characters.

  The default sender name is your Novell username.



  Shareware limitations    !!!
 ------------------------------

  This is the Shareware version of the program. This version allows only
  up to 4 user-defined-standard messages and does not allow changing
  senders name.

  There are no limitations in the REGISTERED VERSION.



  Registration Information
-----------------------------

  SmartSend is a copyrighted program protected by all applicable US and
  International copyright laws. If you have obtained this copy from a
  Shareware disk vendor, an on-line computer service or bulletin board, a
  friend or colleague, or any similar source, you have the trial
  (unregistered) copy.
  You are allowed to use this copy without charge for a limited time as
  specified under the license agreement. After this time, you must register
  in order to continue using SmartSend legally.

  The registration fee for SmartSend is $6 (US). Payment of this fee entitles
  you to:

   - A disk with the extended version of SmartSend


  A REGISTERED VERSION of SmartSend can be obtained by sending a money
  order or check and registration form to:

	   Greg Kacy
           BOX 3055, MS 7209, COSI
           Victoria, BC, V8W 3P6
	   Canada


  Contact  (Support/Suggestions/Bug reports)
 -----------------------------------------------

           Greg Kacy
           BOX 3055, MS 7209, COSI
           Victoria, BC, V8W 3P6
	   Canada

           email: gkacy@csr.uvic.ca
	   www: http://www.csc.uvic.ca/~gkacy	




  License Agreement
 ---------------------

  The use of SmartSend is subject to the following terms and conditions.

  SmartSend is copyrighted material. It is protected by all applicable US and
  International copyright laws. You may not make any changes or modification
  to SmartSend. You may not decompile, disassemble, or otherwise reverse-engineer
  the software in any way.

  Shareware copies are distributed to allow you to try the program before you
  pay for it. These copies are still Copyright Kacy & Fournier Software. These
  copies are not to be confused with "public domain" or "free" software.
  You are allowed to use the shareware copies for a trial period of 30 days.
  Once the trial period is over, you are required to register for $5.

  Title to the licensed software is NOT transferred to the end user. The
  end user is granted an exclusive license to use the software on one
  computer or computer work station at any given time.



  Limited Warranty
--------------------

  THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER
  DISCLAIM ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION ANY IMPLIED
  WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. THE
  ENTIRE RISK ARISING OUT OF THE USE OR PERFORMANCE OF THE SOFTWARE AND
  DOCUMENTATION REMAINS WITH YOU.

  IN NO EVENT SHALL WE BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
  WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
  INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING
  OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, EVEN IF
  WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME
  STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
  CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO
  YOU.


  SmartSend Distribution
-----------------------

  You may pass the UNREGISTERED version of the program to others, but you must
  follow these rules:

  SmartSend MUST be copied in an unmodified form and MUST contain the
  following files:

       ssend.exe
       ssend.dat
       ssend.txt
       orderfrm.txt

  No charge may be made for this program (except for the cost of the actual
  physical disk/duplicating costs).

  Public Domain Disk Vendors may not charge a fee for SmartSend itself.
  However, you may include SmartSend on a diskette for which you charge a
  nominal distribution fee. The purchaser of said diskette must be
  informed in advance that the fee paid to acquire the diskette does NOT
  relieve said purchaser from paying the Registration Fee for SmartSend if
  said purchaser uses SmartSend.

  Operators of electronic bulletin board systems (Sysops) may post SmartSend
  for downloading by their users without written permission only as long
  as the above conditions are met. A fee may be charged for access to the
  bbs as long as no specific fee is charged for downloading SmartSend files
  without first obtaining express written permission from Kacy & Fournier
  Software to charge such a fee.

  Distributors of public domain and user supported software, such as disk
  vending services, may not charge a fee for SmartSend itself. However, you
  may include SmartSend on a diskette for which you charge a nominal
  distribution fee. The purchaser of said diskette must be informed in
  advance that the fee paid to acquire the diskette does NOT relieve said
  purchaser from paying the Registration Fee for SmartSend.


                    ***  END OF FILE  ENJOY........***


