INSTALLATION OF CUISINE SHAREWARE FOR WINDOWS 1.01


GENERAL

Cuisine Shareware is only suitable for computers with a minimum of 4 MB system
memory (8 MB recommended) and a hard disc with at least 5MB of free space.
In case you have 4MB of memory, try to start your computer with a minimal set
of drivers.

You navigate through this text using the arrow keys. When you have finished
reading, press Escape or click on the close button at the top-left of this
window.


SELECTING WHERE TO INSTALL

The installation program will ask you where to install the application.
A default value is suggested. You can change this if you want.


SELECTING WHAT TO INSTALL

You can install this application in two ways.

You select full install; all files of Cuisine Shareware will be installed.

Or you choose custom install; now you can select specific parts of Cuisine
Shareware to install. The options are discussed below for matters of
completeness.

     -    Cuisine Shareware Program (Required)
          Install the application, without additional modules;
     -    Cuisine Shareware Data (Required)
          Install the default database;

IMPORTANT: Do not try *under any circumstance* to install the application
without selecting the Cuisine Shareware Program (Required) option.
The application will *NOT* be installed correctly, despite the program manager
group being created.


CUISINE SHAREWARE FOR WINDOWS PROGRAM MANAGER GROUP

De installation procedure will create a program manager group.
This group contains various Cuisine Shareware icons. For example, you can use
these icons to start Cuisine Shareware.


COPYING

You are allowed to make copies of this program and distribute this to
other people. However it is forbidden to ask money for it. A full version
is available from DOMUS Software bv in Holland.

========================================================================

INSTALLATION OF CUISINE SHAREWARE FOR WINDOWS

The remainder of this file helps you solve problems which you may
encounter during installation or usage of Cuisine Shareware.

Should you encounter problems during installation, first read this file
thoroughly. In case you are still unable to fix the problem, start the
SUPPORT application which is also part of Cuisine Shareware.

You can start SUPPORT from Cuisine Shareware. It's also possible (despite the
failed installation) to run SUPPORT.EXE in the Cuisine Shareware directory
from the Windows File Manager.


Tips and Advice

It is recommended prior to installing Cuisine Shareware to check your PC
for the following settings:
-       In CONFIG.SYS, set the number of FILES to 100 (consult your MS-DOS
        manual on how to do this)
-       Make sure you have at least 590 KB of conventional memory free.
        You can do this by removing as many instructions as possible from
        CONFIG.SYS and AUTOEXEC.BAT by remarking them (put REM <space> in front
        of the instruction). Also try loading the instructions in upper memory.
        Consult your MS-DOS manual for extensive information about freeing 
        conventional memory.
-       Remove all virus scanners which are resident in memory
        (*only during installation*)
-       Terminate all other running tasks during installation of Cuisine
        Shareware.


Problems and Solutions

Below you will find an overview of the most frequent problems and error
messages during installation and usage of Cuisine Shareware for Windows 1.01.


Problem:        Error message 'Invalid cuisine.dbf and cuisine.fpt file'
Solution:       If you follow these steps, the problem will probably be
                solved. 
		-	Insert installation disc 1 in the drive
		-	Enter the following commands:
			A: <enter>
			attrib -h extract.exe <enter>	
			copy extract.exe c: <enter>
		-	Insert installation disc 2 in the drive and enter:
			A:\ <enter>
			c:\extract /u:C:\CUWIN Cuisine.$0* <enter> 
			(If you installed Cuisine Shareware in another
			directory, replace C:\CUWIN with the correct directory
			name.
		-       Now start Cuisine Shareware from Windows File Manager.


Problem:	Error message 'Foxpro ... at general protection fault in module
		5434H.DRV at 0002:0648 (or another module with extension .DRV)
Solution:	Install the default Windows VGA video-driver.

Problem:	I keep getting the error message 'insufficient memory'.
Solution:	You do not have enough memory available. Remove unnecessary
		drivers. See also: Tips and Advice.

Problem:	After installation (during which no abnormal events happened)
		follows the message 'The application has not been properly
		set up. You must manually remove the files that were installed
		on your drive.'
Solution:	This problem is likely related to your PC's configuration.
		Look at the tips in the paragraph Tips and Advice.

Problem:	You get the message 'Program error: Position is off screen!!',
		the cooking times in the dish overview are misaligned or some
		windows	do not fit on the screen and/or some buttons are
		misaligned in the window.
Solutions:	The folowing causes and solutions are possible:
		1.	The shipped font 'FoxFont 7,9' is not installed
			correctly in Windows.
			Go to the program group 'Main', doubleclick the icon
			'Control panel', doubleclick the icon 'Fonts'. Select
			the 'Add...' button. Go to the sub-directory
			C:\WINDOWS\SYSTEM and select 'FoxFont 7,9'. When this
			font is not available, copy it from the installation
			disks to C:\WINDOWS\SYSTEM.
		2.	In Windows Setup you have selected 'Large fonts'
			in the field 'Display'. Change this to 'Small Fonts'
			or select another video-driver.


SHAREWARE

This program is shareware. You may give it to others, but never, in any form,
ask money for it. If you like it and want to continue to use is, please order
the full version via internet, fax or mail. We will promptly send you a
registered version with unlimited recipe storage, recipe export (so you may
exchange recipes with your friends), on line help and an english manual. You
will find ordering information and an order form in the program.

We hope you enjoy Cuisine as much as the meals you cook from the recipes you have
stored in the database. We always welcome  your comments!

Any person or organisation wanting to distribute Cuisine Shareware or other
programs, CD-ROMs from our culinary productline for profit should first
contact DOMUS Software bv at the address below for authorisation.

DOMUS Software bv
P.O. Box 94791,
1090 GT Amsterdam,
the Netherlands,
Internet:	WWW.IWAY.NL/DOMUS
E-mail:		company@domus.nl
CompuServe:	72143,2610
Fax: 		+31 20 4953049
Tel:		+31 20 4953030


DISCLAIMER AND AGREEMENT

Users of Cuisine Shareware must accept this disclaimer of warranty. If you do
not accept this disclaimer, do not use Cuisine Shareware.

"CUISINE SHAREWARE IS SUPPLIED AS IS. THE AUTHOR DISCLAIMS ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR ANY PURPOSE. THE AUTHOR ASSUMES NO LIABILITY
FOR DAMAGES, DIRECT OR CONSEQUENTIAL, WHICH MAY RESULT FROM THE USE OF CUISINE
SHAREWARE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES."

"THE LICENCE AGREEMENT AND WARRANTY SHALL BE CONSTRUED, INTERPRETED AND GOVERNED
BY DUTCH LAWS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM ONE COUNTRY TO
ANOTHER."


DOMUS Software bv
november 1995
