CADRE 1.02
CADRE FINITE ELEMENT ANALYSIS - UNLICENSED EVALUATION SHAREWARE

BY
CADRE ANALYTIC
===================================================================

INTRODUCTION:  CADRE 1.02 is a 3D Windows 3.1 finite element structural
and dynamic analysis program used for calculating displacements and 
loads in static structures, or frequencies and modal vibration shapes
in dynamic structures.  This unlicensed shareware version is made
available for evaluation purposes only. CADRE 1.02 is compatible with
Windows 95.

FURTHER INFORMATION: The Official Developers Home Page on the Internet:

	http://ourworld.compuserve.com/homepages/CADRE_Analytic

OTHER SOFTWARE: 

	Also available from CADRE Analytic is CADRE Pro which has 
	enhanced model development tools and non-linear stability
	analyses capability.  See the web page noted above for details.

		16 bit version 1.1 for Windows 3.1 and Windows 95
		32 bit version 2.1 for Windows 95 and Windows NT

SYSTEM REQUIREMENTS for CADRE 1.02:

	IBM or compatible 386 with 4 megabytes RAM minimum.

	IBM or compatible 486 with 8 megabytes RAM recommended.

	MicroSoft Windows 3.1 (or Windows 95) operation system.

	Windows 3.1 compatible Printer with TrueType Fonts		

SETUP:
	
  1) If you downloaded a packed self executing file cd102c.exe:

   The self extracting file first displays a dialog box to allow selection
   of a temporary directory to put the initial unpacked files, then the 
   files will be automatically extracted to the temporary directory of your
   choice. If the directory doesn't exist, then it will be created.  After
   unpacking, the installation program will automatically be executed
   provided you leave that option checked in the initial dialog box where
   you chose the temporary unpacking directory.  

   If you had unchecked that option, then to continue the installation, 
   you must go to the file manager and click on the file SETUP.EXE in the
   temporary directory. 

   You can now delete the temporary directory (i.e. C:\Cadtemp ) and all 
   of its files after saving CD102.exe somewhere for safe keeping. 

   Alternatively, the files in the temporary directory 
   (excluding CD102.exe) could be copied to a floppy to create a
   standard setup disk for CADRE 1.02. 
 
  2) If you downloaded a file named cd102c.zip you will need to aquire an
     unzipping utility.  We recommend PKZIP by PKWARE or WinZip by Nico
     Mak.  Both are available as shareware.  Unzip the file to a 
     temporary empty directory. Then go to the file manager and click on the
     file named SETUP.EXE as explaned in (1) above. 

  3) If you are using a CADRE 1.02 setup disk follow the directions on the 
  Label and set it up from the Program Manager in Windows 3.1.
 
  4) During installation you may receive a notice such as:
 
	"Unable to copy DDEML.DL_ - file in use".

    This may be caused when other windows programs are in use.  This
    notice almost always occurs if you are using Windows 95.  If you get 
    this message, just press OK to ignore it because if you're using 
    it, you already have it on your system anyway.
 
  5) At the end of the setup routine you are asked if you want to
  add the extension ".fem" to the association list in your WIN.INI
  file.  Choosing YES, you will always be able to execute a  
  ".fem" file by clicking on it in the File Manager.  You can always
  set this up later right from the Windows 3.1 File Manager by choosing
  the Associate item under the menu File item. 
	
GETTING STARTED:  

The best way to get familiar with CADRE is to go through the 
sample exercises in the

	Help - Getting started

file on the main menu bar.  This contains 6 exercises to lead 
you through examining, creating, and solving both static and 
dynamic models.

SAMPLES:

An instructive group of samples are provided with the setup
Disk.  They are sumarized in the file SAMPLES.TXT.   

The help file is extensive, context sensitive, and is intended to 
be an online manual for CADRE 1.02.  You can use the F1 key when
any form is displayed to get help on that form.  
 
Although the evaluation version of CADRE 1.02 provides the full
set of features and capabilities for building finite element models, 
The best and easiest way to construct large complex models is with
the special tools offered in most drawing applications then converting
these to DXF files and subsequently to CADRE FEM files.  Conversion
utilities both to and from DXF files are provided free to registered
CADRE users.  Conversion utilities to convert between measurement
systems (Metric, English) are also provided free with registration. 

ADVANTAGES OF REGISTRATION:  

	1) Support in the use of CADRE by the authors who are also 
	   registered professional engineers.

		Richard yarges, PE
		Tel: 206-937-4632
		Internet 102174.1157@Compuserve.com
		Compuserve 102174,1157
		
		Jim Haynes, PE
		Tel: 425-392-4309
		FAX (USA) 1-800-416-7019
		FAX (Intl) 510-974-9880
		Internet CADRE_Analytic@Compuserve.com
		Compuserve 76345,355

		Address: CADRE Analytic
			 7238 39th Ave S.W.
			 Seattle, WA 98136
				
                         or:

                         CADRE Analytic
			 2035 201st Ave. S.E.
			 Issaquah, WA 98029	
			 

	2) Latest update of the CADRE 1.02 setup disk
	   (without the shareware notices). 

	3) Bound CADRE user manual with a variety of exercises.
		
	4) Problem notices.  CADRE will advise registered users of
	   any discovered problems ASAP.  CADRE Analytic also would 
	   appreciate notice from users of any suspected problems.

	5) Free DXF file conversion utilities so that models can be
	   developed in a variety of drawing programs and imported to
	   CADRE. 

	6) Free Factoring and Converting utility used for converting
	   between systems of units (Metric, English, etc.) for all
	   or portions of the data file.

	8) Free Beam Making Utility for modeling continuous beams.
 
REGISTRATION:

	Registration can be accomplished by mail to

		CADRE Analytic
 		7238 39th Ave S.W.
		Seattle, WA 98136

		or:

		CADRE Analytic
		2035 201st Ave. S.E.
		Issaquah, WA 98029

	or through the

		Compuserve shareware registration forum.
		GO SWREG
	
		Registration Number: 6356
		File: CD102C.EXE	

	The price for registration is $62.00 plus $5.00 handling payable
 	to CADRE Analytic ($7.00 handling outside Canada/USA/Mexico).
	(Prices subject to change without notice)
	
------------------------------------------------------------------------------------------