-------------------------------------------------------------------------
Engi_Cal version 1.3 
-------------------------------------------------------------------------

Engi_Cal is an intelligent progammable calculator, capable of 
interpreting formulas. The user can define formulas and add them to a
personal categorised formula database.  

-------------------------------------------------------------------------
Changes from version 1.2b
-------------------------------------------------------------------------

- A few minor bugs in the formula builder mode were solved.
- Changes to the registration procedure

-------------------------------------------------------------------------
VBRUN300.DLL
-------------------------------------------------------------------------

Engi_Cal requires VBRUN300.DLL to be installed in your Windows\System
directory. Your version of Engi_Cal may not include VBRUN300.DLL 
in order to reduce download time. 
If you do not have VBRUN300.DLL installed, download it from a bulletin 
board, Compuserve or the WWW. You can find more information on
locations from which VBRUN300.DLL can be downloaded on the Engiware site
at http://home.concepts.nl/~hmes/engineer.htm
(http://194.134.7.20/~hmes/engineer.htm).

-------------------------------------------------------------------------
USE OF ENGI_CAL
-------------------------------------------------------------------------

This version of Engi_Cal contains the full functionality and 
can be freely used and copied during the three month evaluation period. 
It is not allowed to distribute this version for commercial purposes 
or make modifications to the program's functionality. 

-------------------------------------------------------------------------
INSTALLATION DETAILS
-------------------------------------------------------------------------

Engi_Cal Setup will install the following files on your system:

<ENGIWARE-DIR>\ENGI_CAL.EXE
<ENGIWARE-DIR>\ENGI_CAL.LIC
<ENGIWARE-DIR>\ENGI_CAL.MDB
<ENGIWARE-DIR>\ENGI_CAL.MD$
<ENGIWARE-DIR>\ENGI_CAL.LDB
<ENGIWARE-DIR>\README.TXT
<ENGIWARE-DIR>\AREA_CIR.BMP
<WINDOWS-DIR>\SETUP1.EXE
<WINDOWS-DIR>\ENGIWARE.GRP
<WINDOWS-SYSTEM-DIR>\VBRUN300.DLL
<WINDOWS-SYSTEM-DIR>\SETUPKIT.DLL
<WINDOWS-SYSTEM-DIR>\CMDIALOG.VBX
<WINDOWS-SYSTEM-DIR>\KEYSTAT.VBX
<WINDOWS-SYSTEM-DIR>\MSOLE2.VBX
<WINDOWS-SYSTEM-DIR>\PICCLIP.VBX
<WINDOWS-SYSTEM-DIR>\SPIN.VBX
<WINDOWS-SYSTEM-DIR>\THREED.VBX
<WINDOWS-SYSTEM-DIR>\COMMDLG.DLL
<WINDOWS-SYSTEM-DIR>\MSAFINX.DLL
<WINDOWS-SYSTEM-DIR>\VBDB300.DLL
<WINDOWS-SYSTEM-DIR>\MSAES110.DLL
<WINDOWS-SYSTEM-DIR>\MSAJT110.DLL
<WINDOWS-SYSTEM-DIR>\COMPOBJ.DLL
<WINDOWS-SYSTEM-DIR>\MSOLEVBX.DLL
<WINDOWS-SYSTEM-DIR>\OLE2.DLL
<WINDOWS-SYSTEM-DIR>\OLE2.REG
<WINDOWS-SYSTEM-DIR>\OLE2CONV.DLL
<WINDOWS-SYSTEM-DIR>\OLE2DISP.DLL
<WINDOWS-SYSTEM-DIR>\OLE2NLS.DLL
<WINDOWS-SYSTEM-DIR>\OLE2PROX.DLL
<WINDOWS-SYSTEM-DIR>\STORAGE.DLL
<WINDOWS-SYSTEM-DIR>\VBOA300.DLL
<WINDOWS-SYSTEM-DIR>\SHARE.EXE

-------------------------------------------------------------------------
REGISTERING YOURSELF AS A USER OF Engi_Cal
-------------------------------------------------------------------------

Registering yourself as a user of Engi_Cal is for FREE! Registering brings 
a number of advantages.

 o All notices of Unregistered Copy will no longer appear.
 o You can continue to use Engi_Cal after the evaluation period.
 o You will be informed about the next major version when it becomes 
   available.
 o If you supply an E-Mail account, a notice for each version release will 
   be sent to you.
 o If you supply an E-Mail account, you will be informed about bugs, 
   whenever they are found.
 o You will have FREE technical support should you have any problems with 
   the program.
 o Your support will encourage Engiware to continue to improve Engi_Cal.

How to register? Read all about it on the Engiware homepage at:
http://home.concepts.nl/~hmes/engineer.htm
(http://194.134.7.20/~hmes/engineer.htm).

or go directly to the registration form at:
http://home.concepts.nl/~hmes/engiware/regist.htm
(http://194.134.7.20/~hmes/engiware/regist.htm).

-------------------------------------------------------------------------
OTHER ENGIWARE PRODUCTS
-------------------------------------------------------------------------

Engi_SI, the most versatile unit conversion program, user-friendly and
fully customisable. 

Engi_H2O, the ideal program for calculation of water/steam properties, 
either in metric or imperial units. 

Engi_Act, an action management program in which all essential features 
for the modern manager are present. In contrast to many existing Personal
Information Managers, Engi_Act focuses on managing actions of staff 
rather than 'own' actions. Engi_Act includes easy, single click action 
allocation and tracking of progress as well as a flexible report writer 
which can be tuned to your own wishes.

Information can be obtained from the Engiware site at:

http://home.concepts.nl/~hmes/engineer.htm
(http://194.134.7.20/~hmes/engineer.htm).
E-mail: hmes@concepts.nl
