Centus (tm) BBS *DOOR* Wildcat! 4.01 Installation -- Procedure I --

1) COPY and Uncompress CENDOR.ZIP to a Temp directory
   
   C:\TEMP
   
   Will you need PKUNZIP.EXE

2) COPY DOORWAY.EXE into Wildcat! Home Directory.
   
   C:\COPY DOORWAY.EXE C:\WILDCAT

3) COPY ANSI.COM file to C:\
   -> Recommended to add ANSI.COM FAST to the AUTOEXEC.BAT file.
   -> Type ANSI.COM FAST
   -> Read NOTE below for additional inf and alternate 
      installation.

4) A) COPY CENTUS.BAT BATCH file to C:\WILDCAT\BATCH
   B) COPY CENDOR.SCR DISPLAY file to C:\WILDCAT\DISP
   C) COPY CENDOR.BBS DISPLAY file to C:\WILDCAT\DISP

5) Move ALL Files from C:\TEMP to NODE1:

   C:\TEMP\MOVE *.* C:\WILDCAT\WCWORK\NODE1

6) WITH MAKEWILD SETUP YOUR NEW DOOR

   C:\WILDCAT\MAKEWILD.EXE

   a) At the Doors Menu select INS Add
   b) At Door Description type:
      Centus (tm) Counties
   c) At Door Batch File type:
      CENTUS
   d) At Door Display File type:
      CENDOR
   e) At Door Multiuser press "N", Check Wildcat! and 
      DOORWAY.DOC Manual if you want Multiuser.
   f) At Small DOOR.SYS, type "N"
   g) Select User Profiles [F3], press F10 when done
   h) Select Conferences [F4], press F10 when done.

7) Finished!, 

The contents of the CENTUS.BAT file is:
DOORWAY SYS /B:MSZ /V:D /P:RUN.EXE NY

Edfel J. Rivera
Suite 805
Winston Churchill No. 138
San Juan, PR 00926
BBS 809-283-6942

NOTE: The above procedure is the one I used to set CENTUS
      DOOR, you could read INSTALL.II and choose the best
      one for you. Also, reco's from expert BBS Sysop's will
      be appreciated. Refer to DOORWAY.DOC for additional
      DOOR settings...
 

TIP: YOU MAY SPECIFY CENTUS (TM) DOOR TO START WITH THE STATE
     FILE WHERE YOUR BBS IS OPERATING!!!. FOR EXAMPLE, IF YOU
     PREFER CENTUS (TM) DOOR v 1.0B TO START WITH THE CALIFORNIA
     STATE FILE, CHANGE THE CENTUS.BAT TO:

DOORWAY SYS /B:MSZ /V:D /P:RUN.EXE CA


PCBOARD SYSOP'S: 
 
     ALTHOUGH this DOOR was developed for a Wildcat! BBS, I am
     sure that it COULD also be set to run under PCBOARD or other
     BBS Software [If it is supported by DOORWAY]. 

     I will appreciate the feedback if a Sysop is able to set this
     DOOR to run under PCBOARD or other major BBS software. Please,
     contact me with information regarding HOW to setup the DOOR for
     other BBS software:

     InterNEt: e_rivera@ns.inter.edu

     or by U.S. mail:

     Edfel J. Rivera
     Suite 805
     Winston Churchill 138
     San Juan, PR 00926



