

    Revision Date: 08/26/94

    This textfile is as complete as I was able to make it as of v2.02.

    Please feel free to make any needed corrections, additions, etc. to the
    file and then pass it on to others. Be sure to change the revision date
    at the top, or in your description when you upload it so that others can
    get the latest copy.

    If you see an * by any entries, it means that I didn't know what the entry
    definition or parameters passed were. (So I'm NOT perfect, who cares?)

    All entries are -basic- entries for example only. You will have to put
    some time into your language file, figure out what works best on format
    codes, color codes, etc. This will merely enable you to easily find
    entries that you don't have defined on your system, or are not sure what
    they are for.

    Courtesy: Omar
              Capricious Alliance
              Node 1: (504) 753-5513  14.4
              Node 2: (504) 753-5592  14.4


Entry #   [Example input]    -comments
------------------------------------------------------------------------------
      1   -Sequence of 8 bytes loaded into user's color registers when a lang
          -file is chosen. NOT TEXT.
      2   [Celerity standared ANSI language file.]
          -Description of the lang file that will be shown to users.
      3   [Created by the sysop.]
          -Any note that you may wish to include about your language file to
           the users.
      4   [Language file #xx created by xxxx on 08/11/94.]
          -Your "credits" screen accessible by using /LANG at any prompt on
           the BBS.
      5   [No Fossil Driver Loaded]
     15   [Invalid System Type, please check your setup!]
          -Message received when an improper system type is flagged in the
           celsetup.exe.
     20   [Sysop, it's your turn now!]
          -Msg received when the "Reserve system" key is used and the current
           user logs off.
     25   [Shutting down....(exiting Celerity)]
          -Msg seen when the BBS is shut down via the F2 key.
     30   [No welcome files found with the extension @p=1@.]
          -p1= required extension of missing welcome file.
     35   [Sysop name is not the registered name!]
     40   [Error! Unable to load sysop account for @p=1@.]
          -p1= Sysop name
     45   [Script file error, code @p=1@]
          -p1= Script error code
     47   [Script file not found]
     48   [Script to execute: {1..5}]
     50   [Error reading mail file!]
     53   [No sound files found.]
     55   [Screen output restricted.]
          -Msg received when the screen output to the user is blocked via the
           local keyboard.
     58   [Continuing user display.]
          -Msg rcvd when screen output to the user is continued via the local
           keyboard.
     62   [Text capture ON]
     63   [Print capture ON]
     65   [Text capture OFF]
     66   [Print capture OFF]
     68   [Error with text.cap]
     70   [Error reading @p=1@.]
          -p1= File attempted to read.
     71   [There are problems with the configuration files for these subboards
           Error accessing @p=1@!
           Please notify @sysop@ at once! |9]
          -p1= config file for current sub-board
          -Msg when an incorrect config is done on a sub or conference.
     73   [Sending NALPS Graphics]
     75   [Carrier lost. Processing upload of @p=1@@p=2@]
          -p1= File
          -p2= Pathname
     76   [@cls@|1]
          -System clearing screen before logon.
     80   [This is an unregistered copy of Celerity BBS.|9|9]
     81   [Please encourage @p=1@ to register this program|9.]
          -p1= First user with Sysop access set.
     82   [Please encourage your sysop to register this program|9.]
     83   [Press @p=1@ to Continue.]
          -p1= Random key
    100   [More {Y/N/Continuous}? |1]
    103   [Enter]
          -Pause prompt.
    200   [Import a RIP Graphic here.]
          RIP Graphic Test
    220   [@NAPON@ Import a NAPLPS Graphic here. @NAPOFF@]
          NAPLPS Graphics Test
    400   [Detecting users Terminal Type]
          -Msg at connect, not seen by the user.
    401   [Scanning file areas for .CFL]
    410   [@cls@ Username: @name:L19@ Filepoints: @filepoints:L6@] etc.
          -User transfer stats screen.
          -p1= Time transfer started
    420   [Processing Carrier-Lost Upload]
          -Msg rcvd when carrier is lost and upload continues to be processed.
    430   [You cannot do bi-directional transfers locally.]
          -Msg when trying to upload or download locally.
    500   [Deleted]
          -Status msg (e-mail)
    501   [New]
          -Status msg (e-mail)
    502   [Saved]
          -Status msg (e-mail)
    503   [Read]
          -Status msg (e-mail)
    504   [Active]
          -Status msg (e-mail)
    505   [N/A]
          -Status msg (e-mail)
    600   [Not found.]
          -Status msg (e-mail)
    603   [That function is only operable for local sysop.]
          -Msg for functions attempted to be performed remote that can only be
           performed from the local keyboard.
    604   [File busy, try again later....|9]
          -msg file busy
    610   [Your terminal emulation is different than the one configured for
           this account. Would you like to load the emulation that this
           account is configured for {Y/N}? |1]
    620   [Your terminal emulation has been set to the account default. If you
           see garbage on your screen, please update your default terminal
           emulation from the user configuration menu.|9]
    630   [If your current emulation will be permanent, please update your
           default emulation from the user configuration menu.|9]
    650   [YES/no]
          -Space bar toggle YES at prompts.
    651   [yes/NO]
          -Space bar toggle NO at prompts.
    652   [YES/no]
          -Space bar toggle YES at prompts (final).
    653   [yes/NO]
          -Space bar toggle NO at prompts (final).
    660   [|1]
          -Input trailer color.
    700   [Error. Your account has an invalid User ID (@p=1@). A new User ID
           has been assigned to your account (@p=2@). You will need to
           reconfigure your newscan.|9]
          -p1= old user ID
          -p2= new user ID
          -msg rcvd user ID has changed (packing, etc.)
   1003   [New Message Scan Menu:
           O)ffline .QWK packet upload    D)ownload a .QWK packet
           U)pdate your message pointers  G)lobal newscan
           Q)uit from this menu
           Your choice: |1        ]
   1004    [Default scan configuration is {@p=1@}. Which configuration would
           you like to scan {1..5}? |1 ]
   1005   [Begin Global Newscan {Y/N}?]
   1006   [@cls@--Beginning Global Newscan--]
          -Global newscan header.
   1007   [Scan Transfer Conferences now {Y/N}?]
   1009   [Scanning Transfer Conferences]
   1012   [Files in batch buffer, entering transfer area...]
   1015   [Global Newscan Complete!]
   1020   [@bottompos@@ceol@]
          -Floating prompt location
   1025   [@software@ v@version@]
          -Celerity vXX
          -connect header
   1050   [-r-xr-xr-x    1 admin   group @p=3:R8@ Feb 02 10:5@p=2@ @p=1@|9]
          -p1= command name
          -p2= random value (for time, date, etc.)
          -p3= random size
          -UNIX Ls long
*  1051   [@p=1:L16@]
          -p1=
          -UNIX Ls
*  1052   [total @p=1@|9]
          -p1=
          -UNIX header
   1053   [Welcome to @BBSNAME@, a SUN-4/65 running SUNOS.
           UNIX(r) System V Release 4.0 (@BBSNAME@)|9|9]
          -UNIX panel
   1054   [Current working directory is /usr/home/guest|9]
          -UNIX working directory
   1055   [You are in a restricted shell and cannot change directories.|9]
          -UNIX restricted cd
   1056   [You may execute one of the following commands:
           ls (to see the contents of your directory)');
           pwd (to see what directory you are in)');
           You may also execute any command in your home directory.
           As you are a guest, you do not have access to any other functions.
           |9]
          -UNIX help
   1057   [|9Disconnected]
          -UNIX disconnect
   1058   [mkdir: failed to make directory; permission denied|9]
          -UNIX no md
   1059   [rm: file not removed; permission denied|9]
          -UNIX no rm
   1060   [@p=1@: command not found|9]
          -p1= given command
          -UNIX bad command
   1105   [You don't belong on the host system.]
   1107   [Alternate system command is: @p=1@]
          -p1= Command for system 2 or system 3
   1108   [Alternate system password is: @p=1@]
          -p1= Password for system 2 or system 3
   1110   [Account deleted due to special circumstances.]
          -Msg rcvd when a user logs on with the special circumstance level
           set on their account.
   1113   [Your application has been turned down in User Voting.]
          -Msg rcvd with auto-deletion activated in NUV, user voted out.
   1115   [Voting Results: ]
   1117   [Number of YES votes: @p=1@]
          -p1= Number of yes votes on the user
   1118   [Number of NO votes: @p=1@]
          -p1= Number of no votes on the user
   1125   [Happy Halloween! What do you have to say?]
          -Halloween note
   1126   [What a scary mask...go and get a new upload]
   1127   [File points +10]
          -Halloween treat to user.
   1128   [Hrmph! Get lost!]
          -Halloween "get lost"
   1130   [Merry Christmas!] (or other winter holiday)
   1132   [Santa gives you 10 file points!]
          -Holiday treat to user
   1150   [There are System Notes!]
   1151   [Delete System Notes {Y/N}? |1]
   1154   [Errors have occured, viewing error log...]
   1155   [Delete the Error Log {Y/N}? |1]
   1160   [The BBS is reserved during this time.]
          -Restricted hours notice. (from celsetup.exe)
   1163   [Please call back after @p=1@ has passed.]
          -p1= Time restricted hours end (celsetup.exe)
   1170   [You do not have access to this system yet.]
          -Msg rcvd when user is not yet validated for the system.
   1173   [Please enter your phone number in the format: 800-555-1212]
          -Phone number request (new user)
   1175   [Please select an alternate password for future logins.]
   1177   [Desired Password: |1]
   1180   [^G Your account has expired!]
          -Msg to user who's expiration date on access has arrived.
   1182   [Your access level has been lowered to @p=1@.]
          -p1= New access level
   1183   [You are already logged on to another node. Multiple logins are not
           allowed on @BBS@. @pause@@hangup@]
   1185   [View net news {Y/N}? |1]
   1187   [To chat with other nodes type "/" at any main menu prompt.]
   1190   [Hit "X" for quick login.]
          -Msg rcvd when a user calls and has already been through news, etc.
   1192   [A system event will occur before your time is up.]
          -Msg rcvd when user calls and backup or external event will occur
           before their allocated time has expired.
   1195   [Sysop Password: |1]
   1196   [Incorrect- Sysop access is denied.]
          -Wrong password entered.
   1198   [The sysop would like to chat with you. Paging Sysop.]
          -Msg user receives when the "wanted" flag is set on his account.
   1205   [Shell command list: ]
   1212   [System Access Password: |1]
   1215   [The Sysop is not available at this time.]
   1217   [What is your alias? |1]
   1219   [Why do you wish to chat? |1]
   1221   [CAE Upload Password: |1]
   1228   [You have access to System #1.]
   1230   [The Access Command is @p=1@.]
          -p1= System Access Command (celsetup.exe)
   1231   [The Access Password is @p=1@.]
          -p1= System Access PW (celsetup.exe)
   1238   [You have overstayed your welcome in this shell.]
          -Timeout msg to user who stays in shell past timeout (celsetup.exe)
   1242   [Celerity DOS Simulator]
          -Celerity DOS header
   1244   [Celerity Version @p=1@]
          -p1= Celerity version
   1246   [Registered to: @p=1@]
          -p1= Registered Sysop name
   1248   [Permission Denied.]
          -DOS permission denied
   1250   [Bad Command or Filename]
          -DOS invalid command
   1252   [|9[CS,CVADRCAL]       (REWD,R,,)  ]
          -vms command simulator
   1254   [|9|9Directory USER_DISK:[CS,CVADRCAL ] ]
          -vms header
   1256   [          Whittier CACOA4 System |9|9 ]
          -vms location
   1258   [ o--------------------------------------------------------------o
           ||               > > >  N O T I C E  < < <                     ||
           ||              ---------------------------                    ||
           ||                                                             ||
           ||    Please see NEWS for th elatest software upgrades and     ||
           ||    important information.                                   ||
           ||                                                             ||
           ||    To see the news enter NEWS at the VMS prompt.            ||
            o--------------------------------------------------------------o

            Last interactive login on Monday, 13-JAN-1992 01:52

      %ACS-I-CL_LIBIS, Current program library is USER_DISK:[CS,CVADRCAL,ADALIB]

      13-JAN-1992 02:42:16
      %DCL-W-ABSYMD, abbreviated symbol definition conflict - rename symbol  ]
          -vms header (big one)
   1260   [User [CS,CVADRCAL] has 748 blocks used, 252 available, of 1000
           authorized and permitted overdraft of 100 blocks on USER_DISK ]
   1262   [Permission Denied]
          -vms permission denied
   1264   [%DCL-W-IVVERB, unrecognized command verb- check validity and
           spelling %]
   1270   [Use A/Z, number, or cursor keys to move selection bar. {Enter} to
           select.]
          -LightBar command
   1275   [Low speed (@p=1@bps) call not accepted.]
          -Low speed lockout notice (celsetup.exe)
   1277   [Unidentified Modem Result Code]
   1279   [To continue you must enter the Low Speed Lockout password: |1]
   1281   [Low Speed Lockout password accepted.]
   1282   [Low Speed Lockout password incorrect...bye!]
   1284   [Connected at @p=1@]
          -p1= Connect rate
   1285   [at a DTE rate of @p=1@]
          -p1= DTE rate
   1287   [ -High DTE for maximum performance]
          -Msg when connected at high DTE
   1290   [Connected to @p=1@ CAE]
          -p1= CAE Name
   1292   [This system requires a password for access.]
          -Bad password msg.
   1293   [User Name: |1]
          -CAE user name
   1294   [Phone Number: |1] [Area Code:] [Location:]
   1296   [It is courteous to leave a name and location.]
   1298   [Welcome CAEop]
   1310   [^K for Commands]
          -Full Screen Editor
   1311   [Commands: Abort Save Cycle]
          -FSE commands
   1315   [Celerity Full Screen Editor]
          -FSE header
   1317   [No message to quote.]
          -Msg when /q is used in a new post, instead of a reply.
   1319   [Maximum of 16 lines of quoting. Please quote sparingly!]
          -Quote header
   1320   [Line to start quote: |1]
   1321   [  Line to end quote: |1]
   1323   [Choose Macro {1..3}]
   1325   [Abort {Y/N}?]
          -confirm abort (messages)
   1327   [Choose Status {0..5}]
   1329   [Command: |1]
          -FSE command prompt
   1330   [Is this an ISDN line?]
   1331   [Does this system accept Zyxel calls?]
   1332   [Does this system accept V.FC calls? ]
   1333   [Does this system accept V.34 calls? ]
   1334   [Does this system accept 19.2kbps calls?]
   1335   [Does this system accept 21.6kbps calls?]
   1336   [Does this system accept 24.0kbps calls?]
   1337   [Does this system accept 26.4kbps calls?]
   1338   [Does this system accept 28.8kbps calls?]
   1339   [Does this system accept 56K ISDN calls?]
   1340   [Does this system accept 64K ISDN calls?]
   1341   [Does this system accept 128k multiplexed ISDN connections?]
   1342   [Does this system accept 144k multiplexed ISDN connections?]
   1350   [Display which work of ANSI/RIP/NAPLPS art? |1]
   1351   [Download which work of ANSI/RIP/NAPLPS art? |1]
   1352   [There is no art in that frame!]
          -Msg when invalid number is entered
   1353   [|9|9]
          -Art list trailer
   1355   [List of Art Works]
          -Art list header
   1356   [@p=1@      @p=2@ |9]
          -p1= art number
          -p2= art description
   1357   [Delete which entry {1..@p=1@}? |1]
          -p1= maximum art number
   1358   [Art entry deleted.]
          -deletion msg.
   1360   [This entry is NOT yours to delete.]
          -Msg rcvd when user attempts an invalid deletion of art.
   1362   [Delete this art item {Y/N}? |1]
          -confirm art delete
   1363   [@p=1@   @p=2@ ANSI |9]
          -p1= art #
          -p2= art description
   1364   [@p=1@   @p=2@ NAPLPS |9]
          -p1= art #
          -p2= art description
   1365   [@p=1@   @p=2@ RIP |9]
          -p1= art #
          -p2= art description
   1370   [File to upload: |1]
          -art file to be uploaded
   1372   [  Please describe this artwork below:
           (> |1]
          -description input field for art
   1373   [  1)ANSI    2)NAPLPS    3)RIP  What type of art work is this? |1 ]
          -art type input
   1374   [Connections: ]
          -(bbs listing)
   1375   [      Notes: @p=1@ ]
          -p1= bbs notes (bbs listing)
   1377   [Enter extended connect information? ]
   1380   [Does this system accept HST calls?  ]
   1381   [Does this system accept V.32 calls? ]
   1382   [Does this system accept V.42 calls? ]
   1383   [Does this system accept V.42bis calls? ]
   1384   [Does this system accept V.32bis calls? ]
   1385   [Does this system accept MNP calls?     ]
   1386   [Does this system accept 19.2k PEP calls? ]
   1387   [Does this system accept 19.2k TPEP calls?]
   1388   [Does this system accept 16.8kbps calls?]
   1389   [Does this system accept 14.4kbps calls?]
   1390   [Does this system accept 9600kbps calls?]
   1391   [Does this system accept 2400kbps calls?]
   1392   [Does this system accept 1200kbps calls?]
   1393   [The system described accepts the following calls: ]
          -connection descriptions
   1394   [Are these connections correct {Y/N}? |1]
          -confirm connect descriptions
   1396   [Add an entry to the BBS listing.]
   1398   [Add a B)BS V)MB or N)UA? |1]
   1400   [BBS Name:     ]
   1402   [BBS Number:   ]
   1403   [Software:     ]
   1404   [# of Nodes:   ]
   1405   [Megs Storage: ]
   1407   [Enter VMB number in this format: 310-693-9405x200
           Box number:      ]
   1409   [Enter NUA in this format: 03110-21300-02415
           NUA number:      ]
   1411   [Description: |1]
          -brief BBS description
   1412   [Save this entry {Y/N}? |1]
          -confirm BBS description
   1414   [Show B)BS V)MB or N)UA listing: |1]
   1416   [Show connect information {Y/N}? |1]
   1417   [Show extended description {Y/N}? |1]
   1418   [@p=1@]
          p1= Entry number
   1420   [BBS Listing:  #    Name      Phone    Software  Storage  Lines ]
          -BBS listing header
   1422   [VMB Listing:  #    Name      Phone                             ]
          -VMB listing header
   1424   [NUA Listing:  #    Name      Phone    Speed                    ]
          -NUA listing header
   1425   [@p=1:L25@@p=2:L12@  @p=3:L8@ @p=4:R4@ Megs  @p=5@ Nodes|9      ]
          -p1= BBS Name
          -p2= BBS Number
          -p3= Software
          -p4= Meggage
          -p5= # Lines
          (BBS listing information)
   1427   [@p=1:L25@@p=2:L20@|9]
          -p1= VMB Name
          -p2= VMB Number
          (VMB listing information)
   1429   [@p=1:L25@@p=2:L18@|9
          -p1= NUA Name
          -p2= NUA Address
          (NUA listing information)
   1431   [|9|9]
          -BBS/VMB/NUA list trailer
   1433   [Out of range!]
          -Msg when invalid listing # is chosen.
   1434   [Delete this listing entry {Y/N}? |1]
          -Confirm BBS/VMB/NUA listing deletion
   1440   [Press {ESC} to end chat.]
          -Msg to sysop on split-screen chat.
   1442   [-------@p=1@ v@p=2@----@p=3@-------@p=4@-----@p=5@-----]
          -p1= Software
          -p2= Version
          -p3= Current time
          -p4= User Name
          -p5= Sysop Name
   1444   [Your PCR is too low! Post more often.]
          -Msg rcvd when xfer is attempted and ratios are in effect.
   1445   [Your current PCR is @p=1@%.]
          -p1= Current PCR
   1446   [Your required PCR is @p=1@%.]
          -p1= required PCR
   1448   [The sysop has arrived...|9]
          -Sysop entry to chat string
   1449   [The sysop has disappeared...|9]
          -Sysop exit from chat string
   1459   [@cls@---- System Parameters ----|9|9]
          -Edit System Parameters header
   1460   [Edit which parameter? |1]
   1462   [Toggle which parameter: |1]
   1464   [Edit which entry {1..@p=1@}? |1]
          -p1= max entry value
   1466   [Read which message {1..@p=1@}? |1]
          -p1= max message value
   1468   [Userlist Size: @p=1@]
          -p1= number of users
   1469   [Calls Total: @p=1@]
          -p1= total # of calls
   1470   [Time and Date: @p=1@ on @p=2@]
          -p1= Current time
          -p2= Current date
   1474   [{Q}uit]
          -Quit system parameter editing
   1480   [You must configure your file listings by adding features you wish
           to see pertaining to each file. You cannot use more than 76 spaces.
           The space cost of each item is shown in parenthesis.]
          -Msg when entering file listing config.
   1482   [#  Door Name      Times Used ]
          -Door listing header
   1483   [|9|9]
          -door listing trailer
   1484   [Open door {1..@p=1@ / {L}ist}: |1]
          -p1= number of doors on system
   1487   [1:Door Name: @p=1@]
          -p1= Door name
          (Door editor)
   1488   [2:Access String: @p=1@]
          -p1= Access Required
          (Door editor)
   1489   [Door Type: @p=1@]
          -p1= door type (none, door.sys, dorinfo1.def, chain.txt)
          (door editor)
   1490   [Command Line: @p=1@]
          -p1= command line to use door
          (door editor)
   1491   [Door uses batch file: @p=1@]
          -p1= YES or NO
          (door editor)
   1492   [Times door used: @p=1@]
          -p1= number of times door was used
          (door editor)
   1496   [New name/title for this door: |1]
          (door editor)
   1497   [New access level for this door: |1]
          (door editor)
   1498   [Select type of dropfile for this door:
           1) Door.sys (New universal standard, GAP)
           2) Dorinfo1.def (RBBS, QuickBBS)
           3) Chain.txt (WWIV)

           Type: |1                                 ]
           (door editor)
   1499   [Enter new command line: %1=com port, %2=speed, %3=userID, %4=node
                     Command Line: |1                                       ]
          (door editor)
   1500   [Does this door use a batch file {Y/N}? |1]
          (door editor)
   1501   [How many times has this door been used? |1]
          (door editor)
   1503   [Create a new door {Y/N}?]
   1505   [Sorry, this door is in use by another node. Try again later.]
   1507   [@p=1:L3@  @p=2:L33@  @p=4@|9]
          -p1= door #
          -p2= door name
          -p3= (not used)
          -p4= times used
   1508   [Delete this door {Y/N}? |1]
   1509   [Mail to @p=3@ from @p=4@ sent on @p=5@]
          -p1= current mail item
          -p2= total mail items
          -p3= recipient
          -p4= sender
          -p5= date sent
   1510   [That file does not need packing.]
   1511   [Pack the mail files? |1]
   1512   [@p=1@ mail will be deleted from @p=2@. There are @p=3@ remaining.]
          -p1= number of mail items being deleted
          -p2= total number of mail items
          -p3= remaining mail items after packing
   1513   [---Pack Mail---]
          -e-mail packing header
   1514   [Title: @p=1@    Sent by: @p=2@]
          -p1= title of mail
          -p2= sender of mail
   1515   [Mail forwarded by: @p=1@]
          -p1= name of user who forwarded mail
   1516   [Sent at @p=2@ on @p=1@]
          -p1= date mail sent
          -p2= time mail sent
   1517   [#  Title   Date   From   Status   ]
          -incoming mail listing header
   1518   [Mail Status: @p=1@ new pieces of mail
                        @p=2@ pieces of archived mail
                        @p=3@ pieces of outgoing mail
          -p1= # new incoming items
          -p2= # saved items
          -p3= # outgoing items
   1519   [#  Title   Date   Sent to   Status]
          -mail listing header
   1520   [@p=1:L3@   @p=2:L30@   @p=3@   @p=4@]
          -p1= number of item
          -p2= mail title
          -p3= date mail sent
          -p4= recipient of mail
          (status is automatically posted)
   1521   [|9]
          -mail listing trailer
   1522   [Full alias of person you would like to send mail to: |1]
   1523   [Full alias of person you would like to copy this mail to, ENTER
           if you are done: |1   ]
   1524   [Sending mail to @p=1@.|9|9 Subject: |1]
          -p1= mail recipient
   1525   [Carbon copy another user {Y/N}? |1]
   1526   [Generate a return receipt {Y/N}? |1]
   1527   [Attach a file to this letter {Y/N}? |1]
   1528   [Sending reply to: @p=1@]
          -p1= author of original mail
   1529   [Forward this e-mail to which user? %|1]
   1530   [A return receipt has been requested. Send it? {Y/N}? |1]
   1531   [A return receipt has been generated at the request of the sender.]
   1532   [The file @p=1@ is attached to this letter. Download it {Y/N}? |1]
          -p1= filename.ext of attached file
   1533   [Netmail address to send to {ENTER for local}: |1]
   1534   [Is this mail destined for another system {Y/N}? |1]
   1535   [Download successful.]
          (e-mail)
   1536   [Download failed.]
          (e-mail)
   1537   [There is a file (@p=1@) attached to this letter. It may be found in
           the @p=2@ directory.]
          -p1= filename
          -p2= mail path
          -local mail file attachment
   1538   [Sorry, but you have no mail to read.]
   1539   [View I)ncoming or O)utgoing mail? |1]
   1540   [Clutter my HD by saving this mail {Y/N}? |1]
   1541   [Sending Feedback to the Sysops]
          -feedback header
   1542   [|9Send feedback to which Sysop: |1]
   1543   [Sending Feedback to: @p=1@]
          -p1= feedback recipient
   1545   [Electronic Mail Room]
          -email header
   1546   [You have new mail, would you like to read it {Y/N}? |1]
   1547   [Delete all mail addressed to you {Y/N}? |1]
   1549   [Delete this letter {Y/N}? |1]
          -confirm mail deletion
   1550   [Sending reply to: @p=1@            Subject: @p=2@ ]
          -p1= recipient of mail
          -p2= title of mail
   1561   [Out of range!]
          -msg when invalid mail number is chosen
   1570   [--- Configure Global Newscan ---]
          -newscan configure header
   1571   [{1} Configure Main Message Conference]
   1572   [{2} Configure G-File Conference      ]
   1573   [{3} Configure Private Conference     ]
   1574   [{4} Configure Transfer Conference    ]
          -alternate commands: 1=B  2=G  3=P  4=X
   1575   [{Q}uit configuration
   1577   [--- Configure Global Newscan ---]
          -detail listing header
   1579   [{@p=1@}  @p=2:L30@]
          -p1= access (selection) number
          -p2= name of item
   1580   [{@p=1L4@}]
          -p1= item type (msg, xfer, conf)
   1581   [{@p=1@}]
          -p1= status of scan setting (*, space, or ?)
   1582   [{Password: |1}]
          -msg when pw is required to access
   1583   [|9]
          -scan config trailer
   1584   [{Q}uit to previous conference|9]
   1585   [Configure which item: |1]
   1586   [Password: |1]
          -msg when pw is required to access
   1592   [M)ove or D)elete files: |1]
   1600   [@p=1@ files found.]
          -p1= # of new files found in scan
   1601   [Search all available conferences {Y/N}? |1]
   1602   [Add files to batch queue {Y/N}? |1]
   1603   [Search area @p=1@ {Y/N}? |1]
          -p1= name of each area available in conference
          -transfer subconference search confirm
   1604   [Search all transfer areas {Y/N}? |1]
   1605   [F)ilename  D)escription  B)oth  Q)uit   Search specification: |1]
   1607   [|9You may search using a DOS filename (wildcards accepted) or
             standard text.   ]
   1609   [Searching for @p=1@ in current area...]
          -p1= text/filename being searched for
   1611   [Searching area {@p=2@} @p=1@ for @p=3@.]
          -p1= area name
          -p2= area number
          -p3= text/filename being searched for
   1612   [|9|9]
          -file search trailer
   1615   [--- Batch Transfer Menu ---]
          -batch transfer header
   1618   [You may not download between the hours of @p=1@ and @p=2@.]
          -p1= restricted hours begin (celsetup.exe)
          -p2= restricted hours end   (celsetup.exe)
   1620   [Enter file name/# to download {? to list}: |1]
   1622   [Enter file name/# to verify {? to list}: |1]
   1625   [View archive listing of which file name/# {? to list}: |1]
   1626   [Display detail information of which file name/# {? to list} |1]
   1628   [Enter file name/# of which text file {? to list}: |1]
   1629   [Delete which file name/# {? to list}: |1]
   1630   [Move which file name/# {? to list}: |1]
   1631   [Rename which file name/# {? to list}: |1]
   1632   [Extract from which file name/# {? to list}: |1]
   1633   [Request which file name/# {? to list}: |1]
   1634   [Edit which file name/# {? to list}: |1]
   1640   [@p=1@ passed the integrity check.]
          -p1= filename
   1641   [@p=1@ failed the integrity check.]
          -p1= filename
   1642   [Unable to test the integrity of @p=1@.]
          -p1= filename
   1650   [Protocol {@p=1@}: |1]
          -p1= default user protocol
   1652   [Error locating @p=1@.]
          -p1= filename which could not be found
   1655   [Prepare to download the following:   @p=1@  Size-@p=2@ Cost-@p=3@
           Approximate time: @p=4@ minutes at @p=5@cps.            ]
          -p1= filename
          -p2= point cost
          -p3= file size
          -p4= minutes to DL
          -p5= user's avg. cps
   1657   [Copying file from slow drive to local drive.]
   1658   -displays the contents of file "download.txt"
   1659   -displays the contents of file "upload.txt"
   1662   [Hit {^X} to abort transfer.....]
   1663   [Download results:
           Filename:   Size:   cps   Comment   Cost   Commission      ]
          -download result header
   1664   [Filename:   Size:   cps   Comment   Cost   Commission      ]
          -batch status header
   1665   [No commission points given.]
          -msg when file is free or hasn't been downloaded
   1670   [File Received: @p=1@ ]
          -p1= filename being processed
   1672   [A board event will occur in 1/2 hour. Please upload later.]
          -msg rcvd when within 1/2 hour of backup.bat or external event.
   1675   [This area does not accept uploads.]
   1678   [Filename to upload: |1]
   1680   [Invalid filename!]
          -msg rcvd when filename is a duplicate or improper
   1682   [If this upload was botched, please E)dit and then K)ill it.]
   1684   [You have been granted @p=1@ minutes for your upload.]
          -p1= compensation time returned for upload(s) (celsetup.exe)
   1686   [--- Import multiple files ---]
          -import file header (local)
   1690   [File found: @p=1@|9]
          -p1= filename being added, path and size
   1692   [Add this file {D/Z/V/T/K/Y/N/Q/?}? |1]
          -valid "Add File commands" prompt
   1694   [Add File Help- Valid commands are as follows:
           D)os Drop   Z)ip listing   V)iew .gif with VPIC  T)ype of file
           Y)es {add}  N)o {skip}     K)ill {delete}        Q)uit        ]
   1696   [Add files automatically {Y/N}? |1]
          -msg to add all files in default dir
   1700   [Point Value: @p=1@]
          -p1= assigned point value
   1703   [Uploaded by: @p=1@]
          -p1= user currently online
   1705   [Should this download be free of charge {Y/N}? |1]
   1707   [Move this file to the appropriate directory {Y/N}? |1]
   1708   [Copy file to the current directory {Y/N}? |1]
   1710   [Error copying file. Check your directory names.]
   1711   [Your upload of @p=1@ is being spooled. It will appear in a few
           minutes if the system has a dedicated upload server, or it will
           appear after you log off if it does not. Do not worry about your
           file not appearing.|9]
          -p1= name of spooled upload
   1712   [Your download limit has been extended by @p=1@ k for this call. You
           may download up to @p=2@k this call.|9]
          -p1= K credit given
          -p2= K available this call
   1713   [Process @p=1@ (zip comments, etc.) {Y/N}? |1]
          -p1= uploaded file
   1716   [Add this file {Y/N}? |1]
          -msg add file to area
   1719   [You cannot add resident files with your current access.]
   1724   [Search this area for identical file names {Y/N}? |1]
   1727   [Search all areas for identical file names {Y/N}? |1]
   1730   [Enter search specification. DOS wildcards may be included to limit
           or expand the search. Default is @p=1@*.* (everything in this area)
           Path to search {@p=1@}: |1                ]
          -p1= default pathname for current area
   1733   [Searching @p-1@...]
          -p1= area being searched
   1736   [No files found matching search specification.]
   1740   [   Filename: @p=1@   Program Name: @p=2@   Disks: @p=3@ of @p=4@
             File Size: @p=5@     Point Cost: @p=6@   Times Downloaded: @p=7@
           Uploaded By: @p=8@ on @p=9@ at @p=10@ |9      ]
          -p1= filename
          -p2= program name
          -p3= disk number 1
          -p4= last disk number
          -p5= file size
          -p6= file point cost
          -p7= number of times downloaded
          -p8= uploader
          -p9= date uploaded
          -p10= time uploaded
          (Detail file information option)
   1742   [Path to file: @p=1@   Unvalidated: @p=2@   Free Download: @p=3@|9]
          -p1= path of file
          -p2= {Yes or No}
          -p3= {Yes or No}
          (detail file info, continued)
   1744   [Personal for: @p=1@|9]
          -p1= User that file is reserved for
   1745   [File Password: @p=1@|9]
          -p1= download password for file
   1747   [Resolution: @p=1@|9]
          -p1= resolution color/depth of image
   1748   [Description: |1]
   1749   [|9|9]
          -detail file info trailer
   1750   [--- Delete File ---]
          -delete file header
   1752   [Delete this file {Y/N}? |1]
   1754   [Remove upload credit from uploader {Y/N}? |1]
   1756   [Erase file from disk {Y/N}? |1]
   1760   [@cls@Delete File Area |9|9 Delete @p=2@ {Y/N}? |1]
          -p2= area name
          -delete area header
   1762   [This function deletes .DIR, .DES, and .BCK files. Do not delete
           this area's data file if it is shared or if you wish to preserve
           the listing.
           Delete this areas's data file {Y/N}? |1]

           NOTICE: The "change area" text below should be kept to one line--
           it is a full-screen display, and can get pretty nasty if it isn't
           done carefully. When a field is changed, the change will occr on
           position #26 of the text (i.e. try to put the "[X] xxxxx........"
           in 25 characters, and @p=2@ on the 26th character.) @p=1@ is the
           letter needed to edit that option, @p=2@ is the current value, if
           any. Do not add linefeeds on the end.

   1770   [@pos=01, 09@ {@p=1@} Area Name........@p=2@@ceol@]
          -p1= letter needed to edit option
          -p2= current option value
   1772   [@pos=01, 10@ {@p=1@} Area Path........@p=2@@ceol@]
          -p1= letter needed to edit option
          -p2= current option value
   1774   [@pos=01, 11@ {@p=1@} Data Path........@p=2@@ceol@]
          -p1= letter needed to edit option
          -p2= current option value
   1776   [@pos=01, 12@ {@p=1@} Area Sponsor.....@p=2@@ceol@]
          -p1= letter need to edit option
          -p2= current option value
   1778   [@pos=01, 13@ {@p=1@} Access Code......@p=2@@ceol@]
          -p1= letter needed to edit option
          -p2= current option value
   1780   [@pos=01, 14@ {@p=1@} Access Level.....@p=2@@ceol@]
          -p1= letter needed to edit option
          -p2= current option value
   1782   [@pos=01, 15@ {@p=1@} Options..........@ceol@]
          -p1= letter needed to edit option
   1784   [@pos=01, 14@ {@p=1@} Quit and Save changes.]
          -p1= letter needed to edit option
   1786   [@pos=01, 14@ {@p=1@} Quit and Abandone changes.]
          -p1= letter needed to edit option
   1790   [--- Modify File Area ---]
          -modify file area header
   1792   [@pos=01, 17@@ceol@Is this a slow drive (CD ROM, Optical, Tape,
           floppy {Y/N}? |1]
   1794   [@pos=01, 17@@ceol@Accept uploads to this area {Y/N}? |1]
   1796   [@pos=01, 17@@ceol@Allow downloads from this area {Y/N}? |1]
   1798   [@pos=01, 17@@ceol@Does this area ignore PCR/UDR/GENR {Y/N}? |1]
   1800   [@pos=01, 17@@ceol@Does this area provide free downloads {Y/N}? |1]
   1802   [@pos=01, 17@@ceol@Scan area for repeats during uploads {Y/N}? |1]
   1804   [@pos=01, 17@@ceol@Scan all areas for repeats during UL {Y/N}? |1]
   1806   [@pos=01, 17@@ceol@Import file_id.diz if possible {Y/N}? |1]
   1808   [@pos=01, 17@@ceol@Allow user to override file_id.diz importation
           {Y/N}? |1]
   1810   [@pos=01, 22@@ceol@Edit file area: |1]
          -change area prompt
   1812   [Abandon changes to this area {Y/N}? |1]
   1820   [@cls@--- Sort File Areas ---]
          -sort file area header
   1822   [Sort by: N)ame  D)ate         T)imes downloaded   R)andom  S)ize
                    G)IF/TGA resolution  C)olor Depth{.gif}  Q)uit
           Option: |1              ]
          -sort file area propmt
   1824   [@cls@--- Sort File Listings ---]
          -sort file listings header
   1826   [@pos=01, 10@Sort Criteria.........|9]
   1828   [@pos=01, 11@File Area.............@p=1@ (@p=2@)@ceol@]
          -p1= file area number
          -p2= file area name
   1830   [@pos=01, 12@Files to sort.........@p=1@@ceol@]
          -p1= number of files to sort
   1832   [@pos=01, 13@Sort passes left......@p=1@@ceol@]
          -p1= number of passes remaining
   1840   [Destination drive does not exist!]
   1842   [There are @p=1@ bytes free on drive @p=2@.]
          -p1= free space remaining
          -p2= drive being checked
   1844   [There is not enough space on the destination drive. You must free
           up @p=1@ bytes in order to copy this file.]
          -p1= free bytes required to copy
   1846   [Move @p=1@ to @p=2@]
          -p1= source file
          -p2= destination file
   1848   [Copy @p=1@ to @p=2@]
          -p1= source file
          -p2= destination file
   1850   [Error. Unable to move file!]
   1852   [Enter new filename: |1]
          -rename file prompt
   1854   [Error. That name is currently in use.]
   1856   [File renamed...]
   1858   [Error moving file!]
   1860   [Error. Invalid file name!]
   1862   [Deducting one upload of @p=1@ and @p=2@ points.]
          -p1= size of file uploaded which is being removed
          -p2= file points orginally granted for upload
   1864   [You did not upload this file, and therefore may not edit it.]
   1866   [File passwords are not permitted on this system.]
   1870   [--- Re-order @p=1@ Areas ---|9]
          -p1= number of file areas
          -file area re-order header
   1872   [New area for position #@p=1@ {? to list, ENTER to quit}: |1]
          -p1= position/number being modified
   1874   [Not found. Re-enter information.]
   1876   [The user name @p=1@ cannot be found!]
          -p1= name of user unable to be located
   1878   [Grant @p=1@ how many points {@p=2@}? |1]
          -p1= user to give points to
          -p2= default points to give
   1880   [Granting @p=2 points to @p=1@.]
          -p1= user receiving points
          -p2= points being given
   1882   [Scan all areas {Y/N}? |1]
   1884   [No unvalidate files found.]
   1890   [@cls@--- Master File Listing ---|9]
          -master file listing header
   1892   [The generation of a master file list may take quit some time. If
           you are willing to wait, it will be created. Continue {Y/N}? |1]
   1894   [Importing files from @p=1@...]
          -p1= area being processed
          (master file list generation)
   1896   [|9|9Please wait while the master file listing is being zipped.|9]
   1898   [Cannot locate temorary .zip file @p=1@. Downloading unzipped one.]
          -p1= zipped master file listing
   1900   [Extract file from @p=1@]
          -p1= file to be extracted from
          -extract file header
   1902   [Enter file to extract {? to list}: |1]
   1904   [Error. Cannot find extracted file.]
   1906   [Do you wish to T)ype or D)ownload this file: |1]
   1908   [You have been charged @p=1@ points for this extraction.]
          -p1= points charged to user
   1910   [Please wait while the extracted file is being zipped....]
   1912   [Cannot locate temporary .zip file @p=1@.]
          -p1= name of zipped extracted file
   1914   [Newscan complete...]
   1916   [There is 1 file in this area.]
          -single file in area header (always 1)
   1918   [There are @p=1@ files in this area.]
          -p1= number of files in the area (0 or 2+)
   1920   [There is no such drive on your system.]
   1922   [@cls@--- Move Files ---]
          -batch move files header
   1924   [Make SURE you have room on the destination drive.]
          -msg batch move files warning
   1926   [First file in range to move: |1]
   1928   [Last file in range to move : |1]
   1930   [Destination Area {? to list}: |1]
   1932   [Error. File non-existant. Moving file record.]
   1934   [Cleaning up after file move operation....]
   1940   [@cls@--- Delete Files ---]
          -batch delete files header
   1942   [These files will be deleted, and users will keep credit for them.]
          -msg batch delete warning
   1944   [First in range of files to delete: |1]
   1946   [Last in range of files to delete: |1]
   1948   [File to be deleted: @p=1@]
          -p1= file to be deleted
   1949   [Deleting files...]
          -msg delete files
   1950   [Delete all of these files {Y/N}? |1]
          -batch delete confirm
   1952   [Would you like to M)ove or D)elete a range of files: |1]
   1954   [@cls@--- Point Reassignment ---]
          -file point reassignment header
   1956   [Assign how many K per point? |1]
   1958   [This will reassign all point values in areas @p=1@ through @p=2@
           based on a 1 point per @p=3@K basis.
           C)ontinue      Q)uit     Option: |1   ]
          -p1= first area in range chosen
          -p2= last area in range chosen
          -p3= point per K file size to assign
   1960   [Reassigning points in area #@p=1@...]
          -p1= current area being reassigned
   1962   [@p=1:L30@, Size: @p=2@   Old: @p=3@   New: @p=4@]
          -p1= file name
          -p2= file size
          -p3= old file point value
          -p4= new file point value
   1965   [|9|9]
          -point reassignment trailer
   1970   [@cls@--- Offline File Cleanup ---|9]
          -offline file cleanup header
   1972   [This function will remove offline files from the listings.
           C)onfirm each file   A)utomatic deletion   Q)uit
           Option: |1]
   1975   [Cleaning offline file from @p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   1978   [Offline file found: @p=1@]
          -p1= name of offline file located
   1980   [Auto-deleting offline files....|9]
   1983   [Remove this file from your listings {Y/N}? |1]
          -msg confirm each deletion
   1990   [@cls@--- Move Files to Backup ---|9]
          -backup files header
   1993   [This function will move files to backup (.BCK) files.
           C)onfirm each move   A)utomatic move   Q)uit
           Option: |1   ]
          -backup files prompt
   1996   [Backing up area #@p=1@ (@p=2@)...]
          -p1= area number
          -p2= area name
   1999   [Offline file found: @p=1@]
          -p1= name of offline file located
   2002   [Automatically backing up offline files....]
   2004   [Move this offline file to backup {Y/N}? |1]
          -individual confirm prompt
   2010   [@cls@--- Verify Locations and Size ---|9]
          -verify location/size header
   2013   [This function will scan all files in the area for location and file
           size. If a file is not found in its specified location, Celerity
           will look in the current area for the file.
           C)ontinue   Q)uit    Option: |1   ]
          -verify loc/size prompt
   2016   [Verifying area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2019   [@p=1:L30@.]
          -p1= file name being verified
   2022   [Located|9]
   2025   [Not found. |9]
   2028   [File size mismatch!  Old: @p=1@   New: @p=2@]
          -p1= recorded size
          -p2= current size
   2030   [@cls@--- Old File Removal ---]
          -old file removal header
   2033   [This function will delete files uploaded before @p=1@.
           C)onfirm each deletion   A)utomatic deletion   Q)uit
           Option: |1 ]
          -file removal prompt
   2036   [Examining area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2039   [Old file found: @p=1@ from @p=2@.]
          -p1= filename
          -p2= date uploaded
   2042   [Auto deleting old files...]
   2045   [Delete this file {Y/N}? |1]
          -individual delete confirm
   2050   [@cls@--- DOS Command Processing ---|9]
          -DOS command on file(s) header
   2052   [This function will perform a DOS command on each and every file in
           the area. Insert a %1 parameter to specify the file anme, or ENTER
           to abort.  Example: PKZIP %1 -z < c:\zipheadr.asc
           DOS Command Line: |1]
          -Dos command proccessing prompt
   2055   [Processing area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2058   [C>@p=1@@p=2@@p=3@]
          -p1= first portion of command line
          -p2= %1 equivalent
          -p3= second portion of command line
   2060   [@cls@--- Touch Files ---|9]
          -touch files header
   2063   [This function will set the DOS time and date of all files in the
           area to the time and date they were uploaded to the BBS.
           Scan all volumes in this conference {Y/N}? |1]
          -touch files prompt
   2066   [Touching files in area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2067   [Ready to touch files {Y/N}? |1]
          -touch files confirm
   2069   [Setting time/date stamp on @p=1@@p=2@ to @p=3@ @p=4@|9]
          -p1= file path
          -p2= file name
          -p3= time uploaded
          -p4= date uploaded
   2073   [@cls@--- Multiple File Scan ---|9]
          -multiple file scan header
   2075   [Make sure that you sort areas by file name before performing this
           operation!]
          -msg multiple file scan warning
   2077   [Scanning for repeats in area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2079   [Repeat found: @p=1@]
          -p1= name of file found in multiple areas
   2080   [@cls@--- Directory Scan ---|9]
          -file path directory scan header
   2083   [This function scans directories for files not in the listings.
           C)onfirm each found   A)utomatically add files   Q)uit
           Option: |1  ]
          -directory scan prompt
   2086   [Searching area #@p=1@ {@p=2@}...]
          -p1= area number
          -p2= area name
   2089   [No unlisted files found...|9]
   2090   [@cls@--- Offline File Download ---|9]
          -offline download header
   2093   [Full path of file to download: |1]
          -offline download prompt
   2095   [Cannot locate @p=1@|9]
          -p1= file name not located
   2097   [Successful Offline Download]
   2099   [Unsuccessful Offline Download]
   2100   [@cls@]
          -upload/download statistics header
   2103   [Request that this file be put online {Y/N}? |1]
   2105   [That file is already online...]
   2107   [Your request has been noted. Please allow a few days for the sysop
           to put that file online.|9]
   2109   [@cls@--- Sysop Commands ---|9|9Free Space: @p=1@|9]
          -p1= free drive space
          -p2= area name
          -p3= area number
          -sysop commands header
   2112   [You were caller #@p=1@
           There have been @p=2@ uploads totalling @p=3@k.
           There have been @p=4@ downloads totalling @p=5@k.  ]
          -p1= caller number
          -p2= number of uploads
          -p3= total K of uploads
          -p4= number of downloads
          -p5= total K of downloads
          -CAE status
   2115   [Display transfer status again {Y/N}? |1]
   2117   [There is no transfer section in this conference.]
   2119   [There is no transfer section in this conference.]
   2122   [Your PCR is too low!  Current PCR: @p=1@   Required PCR: @p=2@
           Post more intelligent messages in order to access transfers.   ]
          -msg PCR too low (celsetup.exe)
   2125   [Current Location: @p=1@   Area: @p=2@ ]
          -p1= area name
          -p2= area number
          -transfer area bar
   2128   [Newscanning @p=1:L4@, @p=2@ ]
          -p1= area number
          -p2= area name
          -newscan transfers prompt
   2130   [Filename]
          -filesort param
   2133   [Date]
          -filesort param
   2136   [Times Downloaded]
          -filesort param
   2139   [File Size]
          -filesort param
   2142   [GIF/TGA Resolution]
          -filesort param
   2145   [GIF/TGA Color Depth]
          -filesort param
   2148   [Random Sort]
          -filesort param
   2150   [Slow]
          -CAE param
   2153   [U/L]
          -CAE param
   2155   [D/L]
          -CAE param
   2158   [No Ratio]
          -CAE param
   2161   [Free]
          -CAE param
   2164   [Scan Area]
          -CAE param
   2167   [Repeat scan]
          -CAE param
   2170   [File_id.diz]
          -CAE param
   2173   [-opt]
          -CAE param
   2175   [@cls@--- File Editor ---|9]
          -file edit header
   2176   [@cls@--- Extended File Edit ---|9]
          -extended file edit header
   2179   [File uploaded by {@p=1@}: |1 ]
          -p1= default uploader
   2182   [Free Download {Y/N}? |1]
   2185   [Unrated File {Y/N}? |1]
   2189   [File path {@p=1@}: |1]
          -p1= current file path
   2192   [File Point Cost {@p=1@}: |1 ]
          -p1= current file point cost
   2195   [Times Downloaded {@p=1@}: |1]
          -p1= number of times downloaded
   2196   [Path to move file to: |1]
   2197   [Unable to move file...]
   2198   [Renew this file's appearance on newscans {Y/N}? |1]
   2199   [@cls@]
          -extended edit trailer
   2200   [@cls@--- Sysop Flag Editor ---|9]
          -sysop flag editor header

          NOTICE: Spacing on the items below is -critical- to a good display.
          It is advisable to NOT extend the length of the descriptions unless
          you intend to totally rewrite the langauage positions of all of the
          items below...

   2201   [@pos=01,04@ 1 (X) Unlimited Time ]
   2202   [@pos=01,04@ 1 ( ) Unlimited Time ]
   2203   [@pos=01,05@ 2 (X) Transfer Users ]
   2204   [@pos=01,05@ 2 ( ) Transfer Users ]
   2205   [@pos=01,06@ 3 (X) Extended Info  ]
   2206   [@pos=01,06@ 3 ( ) Extended Info  ]
   2207   [@pos=01,07@ 4 (X) Parameter Edit ]
   2208   [@pos=01,07@ 4 ( ) Parameter Edit ]
   2209   [@pos=01,08@ 5 (X) View Anonymous ]
   2210   [@pos=01,08@ 5 ( ) View Anonymous ]
   2211   [@pos=01,09@ 6 (X) Sensitive Xfer ]
   2212   [@pos=01,09@ 6 ( ) Sensitive Xfer ]
   2213   [@pos=01,10@ 7 (X) Timeout Xclude ]
   2214   [@pos=01,10@ 7 ( ) Timeout Xclude ]
   2215   [@pos=01,11@ 8 (X) Feedback List  ]
   2216   [@pos=01,11@ 8 ( ) Feedback List  ]
   2217   [@pos=01,12@ 9 (X) Log Exclusion  ]
   2218   [@pos=01,12@ 9 ( ) Log Exclusion  ]
   2219   [@pos=01,13@10 (X) Art Gallery    ]
   2220   [@pos=01,13@10 ( ) Art Gallery    ]
   2221   [@pos=27,04@11 (X) BBS Listing    ]
   2222   [@pos=27,04@11 ( ) BBS Listing    ]
   2223   [@pos=27,05@12 (X) New User Vote  ]
   2224   [@pos=27,05@12 ( ) New User Vote  ]
   2225   [@pos=27,06@13 (X) Oneliners      ]
   2226   [@pos=27,06@13 ( ) Oneliners      ]
   2227   [@pos=27,07@14 (X) SysMenu Access ]
   2228   [@pos=27,07@14 ( ) SysMenu Access ]
   2229   [@pos=27,08@15 (X) User Custodian ]
   2230   [@pos=27,08@15 ( ) User Custodian ]
   2231   [@pos=27,09@16 (X) Online Doors   ]
   2232   [@pos=27,09@16 ( ) Online Doors   ]
   2233   [@pos=27,10@17 (X) E-Mail         ]
   2234   [@pos=27,10@17 ( ) E-Mail         ]
   2235   [@pos=27,11@18 (X) Voting Section ]
   2236   [@pos=27,11@18 ( ) Voting Section ]
   2237   [@pos=27,12@19 (X) D/L Private    ]
   2238   [@pos=27,12@19 ( ) D/L Private    ]
   2239   [@pos=27,13@20 (X) System Config  ]
   2240   [@pos=27,13@20 ( ) System Config  ]
   2241   [@pos=53,04@21 (X) Message Sysop  ]
   2242   [@pos=53,04@21 ( ) Message Sysop  ]
   2243   [@pos=53,05@22 (X) Xfer Sysop     ]
   2244   [@pos=53,05@22 ( ) Xfer Sysop     ]
   2245   [@pos=53,06@23 (X) Bulletin Area  ]
   2246   [@pos=53,06@23 ( ) Bulletin Area  ]
   2247   [@pos=53,07@24 (X) Remote DOS     ]
   2248   [@pos=53,07@24 ( ) Remote DOS     ]
   2249   [@pos=53,08@25 (X) Multinode Login]
   2250   [@pos=53,08@25 ( ) Multinode Login]
   2251   [@pos=53,09@26 (X) Quick Login    ]
   2252   [@pos=53,09@26 ( ) Quick Login    ]
   2253   [@pos=53,10@27 (X)                ]
   2254   [@pos=53,10@27 ( )                ]
   2255   [@pos=53,11@28 (X)                ]
   2256   [@pos=53,11@28 ( )                ]
   2257   [@pos=53,12@29 (X)                ]
   2258   [@pos=53,12@29 ( )                ]
   2259   [@pos=53,13@30 (X)                ]
   2260   [@pos=53,13@30 ( )                ]
   2261   []
   2262   []
   2263   []
   2264   []
   2265   [@pos=01,17@Toggle which Flag: |1]
          -toggle flag prompt
   2270   [@cls@--- User Flag Editor ---|9]
          -user flag editor header
   2271   [@pos=01,04@ 1 (X) @p=1:L19@]
   2272   [@pos=01,04@ 1 ( ) @p=1:L19@]
   2273   [@pos=01,05@ 2 (X) @p=1:L19@]
   2274   [@pos=01,05@ 2 ( ) @p=1:L19@]
   2275   [@pos=01,06@ 3 (X) @p=1:L19@]
   2276   [@pos=01,06@ 3 ( ) @p=1:L19@]
   2277   [@pos=01,07@ 4 (X) @p=1:L19@]
   2278   [@pos=01,07@ 4 ( ) @p=1:L19@]
   2279   [@pos=01,08@ 5 (X) @p=1:L19@]
   2280   [@pos=01,08@ 5 ( ) @p=1:L19@]
   2281   [@pos=01,09@ 6 (X) @p=1:L19@]
   2282   [@pos=01,09@ 6 ( ) @p=1:L19@]
   2283   [@pos=01,10@ 7 (X) @p=1:L19@]
   2284   [@pos=01,10@ 7 ( ) @p=1:L19@]
   2285   [@pos=01,11@ 8 (X) @p=1:L19@]
   2286   [@pos=01,11@ 8 ( ) @p=1:L19@]
   2287   [@pos=01,12@ 9 (X) @p=1:L19@]
   2288   [@pos=01,12@ 9 ( ) @p=1:L19@]
   2289   [@pos=01,13@10 (X) @p=1:L19@]
   2290   [@pos=01,13@10 ( ) @p=1:L19@]
   2291   [@pos=27,04@11 (X) @p=1:L19@]
   2292   [@pos=27,04@11 ( ) @p=1:L19@]
   2293   [@pos=27,05@12 (X) @p=1:L19@]
   2294   [@pos=27,05@12 ( ) @p=1:L19@]
   2295   [@pos=27,06@13 (X) @p=1:L19@]
   2296   [@pos=27,06@13 ( ) @p=1:L19@]
   2297   [@pos=27,07@14 (X) @p=1:L19@]
   2298   [@pos=27,07@14 ( ) @p=1:L19@]
   2299   [@pos=27,08@15 (X) @p=1:L19@]
   2300   [@pos=27,08@15 ( ) @p=1:L19@]
   2301   [@pos=27,09@16 (X) @p=1:L19@]
   2302   [@pos=27,09@16 ( ) @p=1:L19@]
   2303   [@pos=27,10@17 (X) @p=1:L19@]
   2304   [@pos=27,10@17 ( ) @p=1:L19@]
   2305   [@pos=27,11@18 (X) @p=1:L19@]
   2306   [@pos=27,11@18 ( ) @p=1:L19@]
   2307   [@pos=27,12@19 (X) @p=1:L19@]
   2308   [@pos=27,12@19 ( ) @p=1:L19@]
   2309   [@pos=27,13@20 (X) @p=1:L19@]
   2310   [@pos=27,13@20 ( ) @p=1:L19@]
   2311   [@pos=53,04@21 (X) @p=1:L19@]
   2312   [@pos=53,04@21 ( ) @p=1:L19@]
   2313   [@pos=53,05@22 (X) @p=1:L19@]
   2314   [@pos=53,05@22 ( ) @p=1:L19@]
   2315   [@pos=53,06@23 (X) @p=1:L19@]
   2316   [@pos=53,06@23 ( ) @p=1:L19@]
   2317   [@pos=53,07@24 (X) @p=1:L19@]
   2318   [@pos=53,07@24 ( ) @p=1:L19@]
   2319   [@pos=53,08@25 (X) @p=1:L19@]
   2320   [@pos=53,08@25 ( ) @p=1:L19@]
   2321   [@pos=53,09@26 (X) @p=1:L19@]
   2322   [@pos=53,09@26 ( ) @p=1:L19@]
   2323   [@pos=53,10@27 (X) @p=1:L19@]
   2324   [@pos=53,10@27 ( ) @p=1:L19@]
   2325   [@pos=53,11@28 (X) @p=1:L19@]
   2326   [@pos=53,11@28 ( ) @p=1:L19@]
   2327   [@pos=53,12@29 (X) @p=1:L19@]
   2328   [@pos=53,12@29 ( ) @p=1:L19@]
   2329   [@pos=53,13@30 (X) @p=1:L19@]
   2330   [@pos=53,13@30 ( ) @p=1:L19@]
   2331   []
   2332   []
   2333   []
   2334   []
          -p1= hardcoded parameters
   2335   [@pos=01,17@Toggle which Flag: |1]
          -toggle user flag prompt
   2340   [@cls@Viewing Infoscript #@p=1@ for @p=2@|9|9]
          -p1= infoscript number
          -p2= name of user
          -view infoscript header
   2342   [@cls@--- Information Scripts ---|9|9]
          -infoform header
   2345   [{@p=1@} @p=2:L30@ ]
          -p1= script number
          -p2= script name
   2346   [Completed]
          -status script completed
   2347   [Not yet completed.]
          -status script not completed
   2348   [Required]
          -status script required
   2349   [Not Mandatory]
          -status script not required
   2351   [|1]
   2350   [|9]
          -infoform report trailer
   2352   [|9Required Forms: ]
   2353   [@p=1@]
          -p1= numbers of required forms
   2354   [|9]
          -required forms trailer
   2357   [Fill out which infoform {? to list}: |1]
   2358   [There are still forms which you must fill out...|9]
          -msg rcvd when all required forms are not completed
   2370   [International phone # noted. Notify sysop if over 12 digits.|9]
   2371   [The phone number must be in the format: 800-555-1212.|9]
   2372   [Invalid phone number!|9]
   2379   [|1]
   2380   [Available Selections:
           Access    Area Name|9  ]
          -scan configure header
   2381   [@p=1:L14@     @p=2:L40@ ]
          -p1= access number
          -p2= area name
   2382   [{Msg}|9]
          -area type
          (scan config)
   2383   [{Xfer}|9]
          -area type
          (scan config)
   2384   [{Conf}|9]
          -area type
          (scan config)
   2385   [{Door}|9]
          -area type
          (scan config)
   2386   [{Bull}|9]
          -area type
          (scan config)
   2387   [{Art}|9]
          -area type
          (scan config)
   2388   [{BBS}|9]
          -area type
          (scan config)
   2389   [Unused]
          -area type
          (scan config)
   2390   [Unused]
          -area type
          (scan config)
   2391   [N    {Newscan Sub-Trees   }|9]
   2392   [Q    {Previous Conference }|9]
   2393   [^    {Exit Conference Tree}|9]
   2394   [%    {Edit Conference Item}|9]
          -this one seen by sysops only
   2395   [|9]
          -scan config trailer
   2396   [{@p=1@} Select item {? to list}: |1]
          -p1= current location
   2400   [If you are creating/uploading a .QWK packet at this time and do not
           have the Sysop password, hit ENTER and the process will continue
           for the areas that you have access to.
           Password for @p=1@: |1  ]
          -p1= area requiring pw
   2401   [Password Accepted.]
          -msg correct pw
   2402   [Password NOT Accepted.]
          -msg incorrect pw
   2405   [You do not have post access on @p=1@.|9]
          -p1= current conf item
          -msg conf post denied
   2406   [Add a new message base {Y/N}?: |1]
   2407   [Error saving base! Data file @p=1@ exists!|9]
          -p1= data file for base
          -create msg base error
   2408   [Edit @p=1@ {Y/N}?  |1]
          -p1= current/selected msg area or conf
   2409   [Would you like to create a new item {Y/N}? |1]
          -msg create new msg base or conference
   2410   [Warning- Access code or data files not unique.@pause@]
          -msg access code not unique
          -create msg base/conf item
   2411   [No conference item to @p=1@.|9]
          -p1= action (delete, modify, etc.)
   2412   [Delete which item: |1]
          -delete msg base or conf prompt
   2413   [Edit which item: |1]
          -select modifier item prompt
   2414   [Are you sure you want to delete @p=1@ {Y/N}? |1]
          -p1= item to be deleted
          -msg confirm delete msg base/conf
   2415   [Delete data files for this item from disk {Y/N}? |1]
          -msg confirm delete data files for previous item
   2416   [Sorry, that item does not exist...|9]
   2417   [There is no conference item to select...]
   2419   [Search for messages addressed only to you {Y/N}? |1]
   2420   [Message base @p=1@ located!
           Include in your Global Newscan {Y/N}? |1]
          -p1= new base found
          -msg new area found, include confirm
   2421   [Post a message on @p=1@ {Y/N}? |1]
          -p1= current msg base
          -msg rcvd at end of item scan
   2422   [Transfer area @p=1@ located!
           Add to your Global Newscan {Y/N}? |1]
          -p1= current area
          -transfer area found, include confirm
   2423   [Sub Conf @p=1@ found. Include this conf in your Newscan {Y/N}? |1]
          -p1= new sub conference found
          -msg subconference found, include confirm
   2424   [Sorting sub-conferences...|9]
          -msg conf sort
*  2437   [(Sorry, I don't know what this one is supposed to be...)]
   2500   [The sysop does NOT want to chat...@delay=50@]
   2504   [Tell @sysop@ why you would like to chat: |1]
   2507   [Repeat the {C}hat command to turn chat call off.]
   2510   [Face it buddy, @sysop@ doesn't isn't around!@delay=99@@hangup@]
          -msg when user tries to chat more than 10 times
   2513   [Chat call is now off...]
   2520   [Range {1-@p=1@} (ENTER for all, ? for help): |1]
          -p1= maximum range
          -msg listing prompt
   2521   [Enter a range of entries:
           4     Selects entry #4
           2-7   Selects entry #2 through #7
           6+    Selcets entries from #6 to the end
           ENTER Selects all entries   ]
          -msg listing help display
   2523   [Invalid range!]
          -msg invalid range entered
   2525   [Edit Conf Item: |1]
          -conf item edit input prompt
   2528   [Trying to page @sysop@.]
   2530   [Node to send a message to {? to list}: |1]
   2533   [Enter your message to @p=2@ on Node #@p=1@.
           ENTER on a blank line to end.]
          -p1= node number
          -p2= name of user on node
   2536   [Message: |1]
          -multinode message entry prompt
   2538   [The message has not been sent. There is no one on that node.]
          -msg no user on other node
   2539   [Message has been sent.]
   2540   [You have a message from another user currently online!|9]
   2541   [Do you wish to R)ead it  S)end a reply  I)gnore it  Q)uit: |1]
   2542   [--- InterNode Message ---|9]
          -internode msg header
   2546   [Node #@p=3@  @p=1L:12@ active at @p=2:R8@ ]
          -p1= node description
          -p2= time active
          -p3= node number
   2550   [Unknown]
          -node status
   2551   [Node Down]
          -node status
   2552   [Waiting for call]
          -node status
   2553   [In Login Shell]
          -node status
   2554   [Main System]
          -node status
   2555   [In Message Area]
          -node status
   2556   [In Xfer Area]
          -node status
   2557   [Xfering Files]
          -node status
   2558   [Multinode Chat]
          -node status
   2559   [In Sysop Chat]
          -node status
   2560   [New User Applying]
          -node status
   2561   [In .QWK Area]
          -node status
   2562   [Using a Door]
          -node status
   2563   [Entering System]
          -node status
   2564   [Direct Chat]
          -node status
   2565   [System Link]
          -node status
   2566   [Network Call]
          -node status
   2567   [In Sysop Functions]
          -node status
   2568   [In Sysop File Mgmt]
          -node status
   2569   [Writing a Message]
           -node status
   2570   [In Conference Area]
          -node status
   2571   [In E-Mail Area]
          -node status
   2575   [User: @p=1:L15@]
          -p1= user on node
   2576   [|9]
          -multinode status trailer
   2577   [|9|9]
          -"Who's online" listing trailer
   2579   [User @p=1:L15@ requests your presence in multinode chat.]
   2580   [Activating voice synthesizer...]
   2582   [Paging @sysop@...]
          -msg user rcvs each time chat call sounds on sysop end
   2585   [A system event must be completed. Please call back later. (ENTER)
           @pause@    ]
   2588   [Your time has expired for today. Please call back tomorrow.
           (ENTER) @pause@   ]
   2590   [Force Chat Password: |1]
   2593   [Forcing chat call....]
   2595   [No display file found for this menu.|9|9]
   2597   [Please aquire or design @p=1@|9|9]
          -p1= filename of missing menu
   2598   [|1]
          -menu prompt trailer
   2599   [Valid Commands are: @p=1@|9]
          -p1= valid commands for current menu
   2600   [Login Password: |1]
          -login pw (celsetup.exe)
   2605   [Date to scan from {@p=1@}: |1]
          -p1= currently selected date
          -.QWK by date prompt
   2610   [@cls@@software@ v@version@ Line Editor (100 lines maximum length)]
          -line editor header
   2613   [{/S}ave  {/A}bort   {/?}Help]
          -line editor instructions
   2616   [Line number to @p=1@: |1]
          -p1= edit, delete, etc. (depends on action chosen)
   2619   [Invalid Line Number!]
          -msg invalid line number chosen
   2622   [Erase entire message {Y/N}? |1]
          -msg /Abort
   2625   [@cls@@software@ v@version@ Line Editor (100 lines maximum lenght)]
          -line editor header
          -for new screen when first is filled or scrolled
   2629   [Edit previous line.]
   2632   [Continue with message...]
   2637   [Current line:|9@p=1@|9|9New line: |1]
   2640   [List with line numbers {Y/N}? |1]
   2643   [Line number to center: |1]
   2647   [Replace this {Y/N}? |1]
   2650   [Search for: |1]
   2653   [Replace with: |1]
   2656   [Confirm each replace {Y/N}? |1]
   2659   [Search and replace complete...]
   2662   [Saving message....]
          (line editor)
   2665   [Editor Command {? for help}: |1]
          (line editor)
   2669   [Maximum message size has been reached. If you require more space,
           write your message in a standard text editor and upload it via a
           transfer protocol.   ]
          -msg max size reached in line editor
   2672   [@p=1@ lines left.]
          -msg lines remaining (line editor)
   2675   [Back one line...]
   2679   [@cls@News #@p=1@|9Written by @p=2@ on @p=3@|9]
          -p1= news item number
          -p2= writer of news bulletin
          -p3= date written
          -system news header
   2700   [Do you wish to check each file for on/off line status {Y/N}? |1]
   2703   [Calculating for conference @p=1@.]
          -p1= conference being calculated
          -file status check
   2710   [@cls@--- Recent Caller Listing ---|9]
          -recent callers header
   2711   [-@reol=-@]
          -recent callers trailer
   2713   [Call #   Node   Name     Time   Speed
           -@reol=-@                              ]
          -recent callers listing top bar
   2716   [@p=1@    @p=2@  @p=3@    @p=6@  @p=7@  ]
          -p1= call number
          -p2= node number
          -p3= user name
          -p4= user location
          -p5= login date
          -p6= login time
          -p7= bps rate
          -recent callers listing
   2730   [@pos=40, 18@Total Files
           @pos=40, 19@Total Kbytes
           @pos=40, 20@Offline Files
           @pos=40, 21@Offline Kbytes]
          -file status check
   2733   [@pos=56, 18@@p=1@]
          -p1= total # of files on BBS so far
          -file status check
   2736   [@pos=56, 19@@p=1@]
          -p1= total K of files on BBS so far
          -file status check
   2738   [@pos=56, 20@@p=1@]
          -p1= total offline files on BBS so far
          -file status check
   2741   [@pos=56, 21@@p=1@]
          -p1= total offline K on BBS so far
          -file status check

          NOTICE: The following entry may be used in place of 2730-2741 above
          or you can use the next entry as a trailer for the ones above or as
          an additional entry for something else related to status check.

   2744   [@pos=40, 18@   Total Files: @p=1@
           @pos=40, 19@  Total Kbytes: @p=2@
           @pos=40, 20@ Offline Files: @p=3@
           @pos=40, 21@Offline Kbytes: @p=4@
          -p1= total files on BBS (final)
          -p2= total Kbytes on BBS (final)
          -p3= total offline files on BBS (final)
          -p4= total offline Kbytes on BBS (final)
          -file status check
   2747   [@pos=22, 01@Total Files  @p=1@]
          -p1= total files on BBS (final detail information)
          -file status check
   2749   [   Files Online: @p=1@
                  % Online: @p=2@%
            Storage Online: @p=3@
           Storage Offline: @p=4@
             Storage Total: @p=5@
          -p1= files online
          -p2= % of files online
          -p3= storage online
          -p4= storage offline
          -p4= storage total
          -file status check (final detail information)
   2753   [@p=1@  @p=2@   @p=3@   @p=4@]
          -p1= drive letter
          -p2= size of drive
          -p3= space used
          -p4= space free
          -system storage info
   2759   [-@reol=-@
           Drive   Size    Used    Free
           -@reol=-@|9   ]
          -system storage header
   2762   [-@reol=-@|9]
          -system storage trailer
   2770   [@cls@--- System Information ---|9]
          -system info header
   2773   [Software:    @p=1@ v@p=2@ compiled @p=3@]
          -p1= software name (Celerity, CAE, CAE/TAC, etc.)
          -p2= software version
          -p3= compile date
          -system info
   2776   [Network: CelNet v@p=1@ Mercnet v@p=2@ FidoMailer v@p=3@
           CelerityNet  : Node #@p=4@   ]
          -p1= Celerity Net version
          -p2= MercuryNet version (unused with v2.0)
          -p3= FidoMailer
          -p4= Celerity node #
          -p5= Celerity Hub #
          -system info
   2779   [Time/Date: @p=1@, @p=2@]
          -p1= current time
          -p2= current date
          -system info
   2783   [Registered to: @p=1@   Serial Number: @p=2@]
          -p1= name software is registered to
          -p1= serial number of registration
          -system info
   2786   [BBS Node: @p=2@  #@p=1@]
          -p1= node number
          -p2= node description
          -system info
   2789   [Calls Today: @p=1@   Total Calls: @p=2@]
          -p1= calls today
          -p2= total number of system calls
          -system info
   2792   [Total Days Up: @p=1@   Calls per Day:  @p=2@]
          -p1= total number of days running
          -p2= average number of calls per day
          -system info
   2795   [Modem Driver: @p=1@ ]
          -p1= driver name, FOSSIL or DIGIBOARD
          -system info
   2798   [I/O Info: UART=@p=1@  Input Buffer: @p=2@ Output Buffer: @p=3@
                                 Chars Sent  : @p=4@   Chars Rcvd : @p=5@  ]
          -p1= detected UART
          -p2= input buffer size
          -p3= output buffer size
          -p4= characters sent
          -p5= characters rcvd
          -system info
   2800   [@cls@--- System Status ---|9]
          -system status header
   2806   [@cls@Sysop found... @p=1@]
          -p1= user name, user level (both show)
          -show sysops
   2808   [Show access flags {Y/N}? |1]
          -show sysops
   2809   [Edit this Sysop {Y/N}? |1]
          -show sysops
   2830   [Auto-validating @p=1@]
          -p1= user being autovalidated in voting
          -NUV
   2831   [Auto-deleting @p=1@]
          -p1= user being autodeleted in voting
          -NUV
   2835   [Processing votes.....]
          -msg process votes in voting
          -NUV
   2837   [@p=1:L30.@]
          -p1= user name
          -user being processed
          -NUV
   2838   [Not processing...]
          -msg not processing votes
          -NUV
   2839   [|9|9]
          -NUV process trailer
   2840   [@cls@--- List Pending New Users ---|9]
          -list users in NUV header
   2843   [Yes votes: @p=1@   No Votes: @p=2@]
          -p1= number of yes votes on user
          -p2= number of no votes on user
          -NUV list pending
   2846   [Yes|9]
          -status, NUV list
   2847   [Nay|9]
          -status, NUV list
   2848   [No vote recorded.]
          -status, NUV list
   2849   [|9|9]
          -NUV list trailer
   2850   [Do you wish to comment on this user {Y/N}? |1]
          -NUV comment confirm
   2853   [Sorry, but the comment field is full...]
   2856   [Enter your comment: |1]
          -NUV comment prompt
   2860   [@cls@--- Vote on New Users ---|9]
          -NUV header
   2862   [Skip those you have already voted on {Y/N}? |1]
          -NUV skip voted on confirm
   2864   [New User Found: @p=1@
          -p1= user found in NUV that you have not yet voted on
   2866   [Vote Pending|9]
          -status, NUV
   2868   [Yes: @p=1@   No: @p=2@]
          -p1= yes votes cast on user
          -p2= no votes cast on user
          -NUV cast YOUR ballot
   2870   [Comments exist on this user. Care to read them {Y/N}? |1]
          -read comments confirm, NUV
   2872   [You have already voted on this user. Change your vote {Y/N}? |1]
          -chang vote confirm, NUV
   2874   [View info-script for @p=1@ {Y/N}? |1]
          -p1= user you are voting on
          -view infoform confirm, NUV
          -this shows infoform #5 as defined in celsetup.exe
   2876   [View sysop infoform for @p=1@ {Y/N}? |1]
          -p1= user you are voting on
          -view infoform confirm, NUV
          -this shows infoform #1 (to sysops) as defined in celsetup.exe
   2878   [View validation upload for @p=1@ {Y/N}? |1]
          -p1= user you are voting on
          -view validation upload confirm, NUV (celsetup.exe)
   2880   [@p=1@ did not bother to send a validation upload!]
          -p1= user you are voting on
          -msg no upload rcvd from user as required (celsetup.exe)
   2882   [How do you vote on @p=1@?
           Y)es   N)o   A)sk me again later ]
          -p1= user being voted on
          -input vote prompt, NUV
   2884   [R)emove from voting   V)eto
          -input vote prompt, NUV
   2886   [Option: |1]
          -input vote prompt, NUV
   2888   [V)alidate or D)elete: |1]
          -V)eto input prompt, NUV
   2890   [Thanks for voting....]
          -exit prompt, NUV
   2892   [@cls@--- New User Voting ---|9]
          -NUV header
   2894   [There are no new users at this time...]
          -msg no users in voting
   2900   [@cls@--- Transfer Activity ---|9]
          -transfer activity header
   2902   [User     File   Size   When
          -@reol=-@|9                   ]
          -transfer activity title bar
   2905   [@p=1:L25@  @p=2:L16@   @p=3:R10@   @p=4@  @p=5@]
          -p1= user name
          -p2= file name
          -p3= file size
          -p4= date of transfer
          -p5= time of transfer
          -transfer activity
   2907   [-@reol=-@|9]
          -transfer activity trailer
   2910   [Write a new automessage {Y/N}? |1]
   2920   [@cls@--- Log off of @BBS@ ---|9]
          -logoff header
   2922   [Are you sure {Y/N}? |1]
          -logoff confirm prompt
   2825   [Thank you for calling @BBS@@hangup@!]
          -logoff "Y" message
          -NOTE: hangup will throw them back into the login shell unless you
           have "hang up on exit" checked in celsetup.exe
   2928   [Aborting logoff....]
          -logoff "N" message
   2940   [@cls@--- List Users ---|9]
          -list users header
   2942   [@cls@ #   Name   Loc   Last On   UserNote
           -@reol=-@|9    ]
   2944   [@p=1:R3@  @p=2:L30@  (@p=3@)   @p=4@   @p=6@|9]
          -p1= user number
          -p2= user name
          -p3= user area code
          -p4= date last on
          -p5= user level
          -p6= user note
          -p7= user personal note
          -p8= user internet name
          -p9= user data phone number
          -p10= user voice phone number
          -list users
   2945   [@p=1:R3@  @p=2:L30@  (@p=3@)   @p=4@   @p=6@|9]
          -p1= user number
          -p2= user name
          -p3= user area code
          -p4= date last on
          -p5= user level
          -p6= user note
          -p7= user personal note
          -p8= user internet name
          -p9= user data phone number
          -p10= user voice phone number
          -list long distance users
   2948   [-@reol=-@|9]
          -list users trailer
   2950   [Erase the error log for this node {Y/N}? |1]
          -error log delete confirm
   2952   [Node @node@ error log deleted!]
          -msg error log deleted
   2954   [Error log not found.]
          -msg no error log
   2960   [@p=3@: @p=1@]
          -p1= system log entry
          -p2= date of entry
          -p3= time of entry
          -system log
   2962   [@p=2@ @p=3@ @p=1@ |9]
          -p1= system log entry
          -p2= date of entry
          -p3= time of entry
          -system log entry, first line
   2964   [@cls@--- View System Log ---|9]
          -system log header
   2965   [View the system log for which node: |1]
          -system log view (multinode setups)
   2966   [ENTER/R/Q: |1]
          -ENTER to continue
          -R)epeat last entry
          -Q)uit
          -view syslog prompt
   2967   [CR= Next entry   R= Repeat last entry   Q= Quit viewing syslog
          -syslog help (? at view syslog prompt)
   2968   [Delete the system log {Y/N}? |1]
          -syslog delete confirm
   2969   [System log deleted...]
          -msg "Y" syslog delete
   2970   [@cls@--- System History ---|9]
          -system history header
   2972   [System history dates back @p=1@ days. How many days back would you
           like to view the history for? |1  ]
          -p1= number of days in system history
   2974   [Day#  Date  Calls  Posts  EMail  Uploads  Downloads  New Users|9
           -@reol=-@|9   ]
          -system history title bar

          NOTICE: The following line should NOT be split!

   2976   [@p=1:R3@ @p=2:C8@ @p=3:C5@ @p=4:C5@ @p=5:C5@ @p=6:C7@ @p=7:C9@
           @p=8:C9@|9  ]
          -p1= day number
          -p2= date for that day
          -p3= number of calls
          -p4= number of posts
          -p5= number of e-mail items
          -p6= number of uploads
          -p7= number of downloads
          -p8= number of new users
          -p9= unused #1
          -p10= unused #2
          -system history
   2978   [-@reol=-@|9]
          -system history trailer
   2980   [There have been @p=1@ calls to the system.
           Enter new total number of calls: |1]
          -p1= total number of calls to the system to date
          -edit system history
   2982   [The board has been online for @p=1@ days.
           Enter new total number of days up: |1]
          -p1= number of days online
          -edit system history
   2984   [This option will truncate your user list. All users over the new
           size will be LOST. It is advised that you back up your user list
           before performing this option.
           There are currently @p=1@ user records.
           Enter size of new user list: |1]
          -p1= current number of users on system
          -edit user list size
   2986   [Completed. There are now @p=1@ user records.]
          -p1= new number of users on system
          -edit user list size
   2990   [Current Time: @p=1@   Current Date: @p=2@|9]
          -p1= current time
          -p2= current date
          -edit system time/date prompt
   2992   [New System Time: |1]
          -edit system time
   2994   [Invalid Time!]
          -msg invalid time or time format
   2996   [New System Date: |1]
          -edit system date
   2998   [Invalid Date!]
          -msg invalid date or date format
          -edit system date

          NOTICE: The following entry should be limited to ONE line.

   3000   [---@p=1:R20-@ on Node #@p=2@-@reol=-@]
          -p1= name of user in chat window
          -p2= node user is on
          -multinode chat window title bar
   3002   [There is no one in the chat room at this time.
           Enter the chat room anyway {Y/N}? |1]
          -multinode enter chat confirm
   3004   [Make this room personal {Y/N}? |1]
          -multinode make room private confirm
   3006   [Entering chat room #@p=1@|9|9]
          -p1= multinode chat room number being entered
   3008   [Error encountered entering chat room. Try again.]
   3010   [Sorry, but that chat room is currently full.]
   3012   [Sorry, but that chat room has been designated as personal.]
   3020   [Your status is as follows:  Yes votes- @p=1@  No votes- @p=2@
           You must have @p=3@ yes votes to be accepted.
           You must have @p=4@ no votes to be refused.
           Press {ENTER} to continue. @pause@    ]
          -p1= current number of yes votes on user
          -p2= current number of no votes on user
          -p3= required number of yes votes for validation
          -p4= required number of no votes for deletion
          -NUV status check
   3022   @cls@@showfile={path\validud.bbs@}
          -path= path to validud.bbs display file.
          -Example: You must now upload a copy of your newest ware for
           examination by the voting panel.
           All uploaded files must be in .ZIP format
   3024   [Filename to upload: |1]
          -get filename prompt
          -new user upload
   3026   [Please give a single line description of your upload:
           (> |1                                                  ]
          -description input field
          -new user upload
   3028   [Chances of gaining access are low for one of two reasons:
           a) You don't care enough to send an upload.
           b) You don't know HOW to upload.
           Try again {Y/N}? |1]
          -msg upload not rcvd
          -new user upload
   3030   [Your real name is required for access. It will only be displayed
           on real name echoes. Please enter your first and last name below.
           > |1]
          -real name request
          -new user
   3032   [How old are you? |1]
          -age request
          -new user
   3034   [What gender are you? |1]
          -gender request
          -new user
   3036   [What is your birthdate {Example format @p=1@}? |1]
          -p1= today's date (used as an example)
          -birthdate request
          -new user
   3037   [Invalid date format, please try again.]
          -msg invalid date format
          -new user
   3038   [You have been blacklisted from this BBS. Don't bother to call back.
           @pause@@hangup@ ]
          -blacklist notice
          -new user
   3040   [Invalid alias!]
          -msg alias is already in use, or improper characters are in it.
          -new user
   3042   [Please send a message to @sysop@ requesting access...@pause@]
          -feedback required notice
          -new user
   3044   [An archive of @BBS@ policies and text is available for download.
           Would you like to download it {Y/N}? |1]
          -policies available for dl notice
          -new user
   3046   [@BBS@ accepts, but does not require, user aliases. Please enter
           your desired alias: |1]
          -alias input
          -new user
   3048   [@BBS@ does not accept user aliases. Please enter your real name:|1]
          -real name required input
          -new user
   3049   [Sorry, no new local users are being accepted at this time.
           @pause@@hangup@    ]
          -msg no new local users
          -new user
   3050   [Try again, that name is already in use. @pause@]
          -new user
   3052   [New user process aborted...]
   3054   [Which do you prefer:  1) @p=1@   2) @p=2@ : |1]
          -p1= name as entered
          -p2= name in lower case with first letter in caps
          -new user
   3056   [Please choose an emulation for your account:
           1) IBM ANSI, ANSI BBS, VT100, VT102  (recommended)
           2) Avatar/0+                         (strongly recommended)
           3) VT52                              (discouraged)
           4) VT52 with Atari ST Codes          (discouraged)
           N) TTY (no emulation)                (strongly discouraged)
           Option: |1]
          -new user
   3058   [Please enter a phone number at which you can be reached.
           Format within North America : 800-555-1212
           Format outside North America: +44-1-213021
           Note: International codes must begin with a + and may have up to
           11 digits following, including dashes. |9]
          -phone number request
          -new user
   3060   [Voice number: |1]
          -new user
   3062   [You may also enter a BBS or data number if you so choose.]
          -new user
   3064   [BBS/Data number: |1]
          -new user
   3066   [A fax number may also be listed if you so choose.]
          -new user
   3068   [Fax number: |1]
          -new user
   3070   [A password is required to access your account here. It should be
           between 3 and 15 characters long. It may contain any alpha-numeric,
           punctuation, or 8-bit ASCII characters.
           Password: |1]
          -password input
          -new user
   3072   [Please enter your mailing address below. You have two lines.
           Street Address: |1]
          -street address input
          -new user
   3074   [City, State, Zip: |1]
          -address input
          -new user
   3076   [@p=1@
           @p=2@
           @p=3@
           Is this correct {Y/N}? |1]
          -p1= real name
          -p2= address line 1
          -p3= address line 2
          -address verification
          -new user
   3078   [Error writing account. Sysop may be using an unregistered version
           of @software@ and has a limit on the number of available accounts,
           or there may have been a hardware failure. Press ENTER @pause@   ]
          -msg error writing account
          -new user
   3080   [Account Assignment-     Alias: @p=1@         Password: @p=2@
           Please write down your password and alias!                   ]
          -p1= alias
          -p2= password
          -p3= real name
          -p4= user ID number
          -p5= voice phone number
          -account assignment
          -new user
   3082   [To continue, you must enter the lockout password: |1]
          -new user lockout password required to apply (celsetup.exe)
          -new user
   3084   [Password Accepted]
          -msg valid pw
          -new user
   3086   [Password Incorrect!]
          -msg invalid pw
          -new user
   3088   [Sorry, @BBS@ is not currently accepting new users.]
          -msg no new users accepted
          -new user
   3092   [This system is accepting users by invitation only. A password is
           required to to access the application process.
           New User Password: |1]
          -msg NUP input required,
          -new user
   3094   [Qualified users will vote on your application. Applicants who do
           not call back within one week will be deleted. |9]
          -NUV notice
          -new user
   3096   [Please call back in a few days to check your application status.
           @pause@@hangup@ ]
          -msg call later to check on voting
          -new user
   3098   [You have access to @BBS@. Please feel free to login!]
          -msg access granted
          -new user
   3100   [@cls@--- Create a New User Account ---|9]
          -make a new user header
   3102   [Assign access levels from -5 to 100.|9]
          -make a new user instruction
   3104   [Access level to grant: |1]
          -level input
          -make new user
   3106   [Transfer level to grant: |1]
          -xfer level input
          -make new user
   3108   [File points to grant: |1]
          -file point input
          -make new user
   3200   [Oneliner written by @p=1@ on @p=3@|9]
          -p1= author
          -p2= origin
          -p3= date written
          -p4= time written
          -oneliner information
   3202   [Display which oneliner: |1]
          -OL display input
          -oneliners
   3204   [Out of range!]
          -msg invalid range
          -oneliners
   3206   [@p=1:C80@@ceol@|9]
          -oneliner display prompt
          -oneliners
   3208   [|9]
          -oneliner trailer
   3210   [@cls@--- Create a Oneliner ---|9]
          -oneliner create header
   3212   [Enter your oneliner below. You have 78 characters.
           (> |1]
          -oneliner input prompt
   3214   [Please do not use obscene or libelous langauge in oneliners!]
   3216   [You may not add carriage returns to oneliners.]
          -msg CR invalid entry
   3218   [@p=1:C80@
           Save this oneliner {Y/N}? |1]
          -p1= text of oneliner
          -save oneliner confirm prompt
   3220   [@cls@--- Delete a Oneliner ---|9
           Delete which oneliner {? to list}? |1]
          -delete oneliner header/input prompt
   3222   [Sorry, but you can't delete what you didn't write!]
          -msg not your oneliner
   3224   [@p=1@
           Delete this oneliner {Y/N}? |1]
          -p1= oneliner text
          -oneliner delete confirm
   3226   [Deleted]
          -status oneliner
   3228   [@cls@--- List Oneliners ---|9]
          -list oneliner header
   3230   [@p=1@]
          -p1= oneliner text
          -list oneliners
   3232   [|9]
          -oneliner CR
          -list oneliners
   3234   [|9|9]
          -list oneliner trailer
   3236   [@cls@--- Purge Old Oneliners ---|9]
          -purge oneliner header
   3238   [Purge all oneliners dated before @p=1@ {Y/N}? |1]
          -p1= date to purge before
          -oneliner purge confirm
   3240   [@lastline@@p=1:C78@@ceol@]
          -oneliner floating postion prompt
   3242   [@p=1@|9]
          -oneliner non-floating postion prompt
   3250   [@p=1@ upload bytes have been credited to your account.|9]
          -p1= bytes added to account
   3251   [@p=1@ upload bytes have been removed from your account.|9]
          -p1= bytes removed from account
   3252   [@p=1@ file points have been credited to your account.|9]
          -p1= file points granted
   3253   [@p=1@ file points have been removed from your account.|9]
          -p1= file points removed
   3254   [You have received @p=1@ points as commission.|9]
          -p1= points commission received
   3255   [Your upload of @p=2@ was downloaded by @p=1@ on @p=3@.|9
          -p1= filename downloaded
          -p2= name of downloader
          -p3= date of download
   3256   [Your upload of @p=1@ was received. Please make sure that it has a
           description!]
          -p1= filename received
   3257   [Your file @p=1@ was validated.|9]
          -p1= filename validated
   3258   [Your file @p=1@ was deleted.|9]
          -p1= filename deleted
   3259   [Your upload of @p=1@ was processed successfully!]
          -p1= filename processed
   3300   [Scanning for file @p=1@.....]
          -p1= name of file being scanned for
   3302   [Scanning @p=2@ for file @p=1@...]
          -p1= filename being scanned for
          -p2= area being scanned
   3304   [That file does exist.]
          -msg file found
          -scan for file
   3306   [|9]
          -scan area trailer
   3308   [|9|9Seconds required for search: @p=1@ |9]
          -p1= seconds used in search
   3310   [Hangup after completion of transfer {Y/N}? |1]
          -hangup after transfer confirm
   3312   [You have downloaded more than your daily limit of @p=1@k.|9]
          -p1= users daily download limit
   3314   [Your upload/download ratio is extremely low!|9]
          -msg ratios getting low
   3316   [Your upload/download ratio is too low for this transfer.
           You need to upload @p=1@ bytes to continue with this download.|9]
          -p1= bytes needed to upload in order to increase ratio enough
   3318   [Your GenR is extremely low. You need to post or upload more often.]
          -msg ratios getting low
   3320   [Your GenR is too low to for this transfer. You need to upload @p=1@
           bytes or post @p=2@ messages to continue with this download.|9]
          -p1= bytes needed to upload in order to increase ratio enough
          -p2= number of msgs need to post in order to increase ratio enough
   3322   [You may not download from this area.|9]
          -msg no downloads permitted in this area
   3324   [Please address the above problems and then try the download again.]
          -msg problem with download
   3326   [Transfers only work via modem or null modem!]
          -msg no local transfers
   3328   [Transfers at the speed of @p=1@bps are not permitted.|9]
          -p1= connect speed of user
   3330   [@cls@--- Batch Download Queue ---|9]
          -batch download listing header
   3332   [# Filename  Cost  Size  Est.Time
           -@reol=-@|9]
          -batch dl title bar
   3334   [@p=1:L4@@p=2:L12@ @p=3:R4@ @p=4:R7@ @p=5@|9]
          -p1= filenumber
          -p2= filename
          -p3= point cost
          -p4= size of file
          -p5= estimated time to download
          -batch dl listing
   3336   [-@reol=-@
           Total Batch @p=1@ @p=2@ @p=3@ at @cpsrate@cps (avg)|9|9]
          -p1= total point cost
          -p2= total size in bytes
          -p3= estimated xfer time
          -p4= total xfer size in K
          -batch list summary
   3338   [|9]
          -batch list trailer
   3340   [You may not add any more files to this batch.]
          -msg batch limit reached
   3342   [Adding @p=1@ to batch.
           @p=2@ files currently in batch queue.
           @p=3@ point cost for batch download.
           @p=4@ bytes total in batch.
           This will take approximately @p=5@ to download. |9]
          -p1= file being added
          -p2= number of files in batch queue
          -p3= total point cost of files in batch queue
          -p4= total bytes in batch queue
          -p5= estimated total time for batch download
   3344   [You may not download between @p=1@ and @p=2@|9]
          -msg restricted download times in effect
   3346   [You may enter a file number (3), a file number range (1-6), a file
           name (Celerity.zip), wildcard specifications (*.zip), ? for list,
           or ENTER to abort.|9]
          -batch add instructions
   3348   [Filename/# to add: |1]
          -batch add prompt
   3349   [|9]
          -batch add trailer
   3350   [@p=1@ @p=2@ @p=3@ Successful!]
          -p1= filename
          -p2= bytes transfered
          -p3= cps rate
          -batch dl status successful
   3352   [@p=1@ @p=2@ @p=3@ Failed! Only @p=4@% complete.]
          -p1= filename
          -p2= bytes transfered
          -p3= cps rate
          -p4= percentage successfully downloaded
          -batch dl status failed
   3354   [@p=1@ @p=2@ @p=3@ Lost Carrier]
          -p1= filename
          -p2= bytes transfered
          -p3= cps rate
          -batch dl status lost carrier
   3356   [@p=1@ @p=2@ @p=3@ Aborted! Only @p=4@% complete.]
          -p1= filename
          -p2= bytes transfered
          -p3= cps rate
          -p4= percentage successfully downloaded
          -batch dl status aborted
   3358   [Free]
          -batch dl status
   3360   [@p=1:R6@]
          -p1= item cost
          -batch dl status
   3362   [Uploader not found!]
          -msg uploader no longer has account on system
   3364   [@p=1@ to @p=2@]
          -p1= points given to uploader
          -p2= name of uploader
          -commission given notice
   3366   [A file_id.diz has been found attached to this file.
           Do you wish for it to override your description {Y/N}? |1]
          -import id.diz confirm
   3368   [Importing File_ID.diz...]
          -msg id.diz import "Y"es
   3370   [@cls@Received File: @p=1@]
          -p1= file received
          -batch item rcvd listing
   3372   [The file you uploaded already exists. Please do a S)earch before
           you upload files to avoid this problem in the future.
           If it was your file and a botched upload, please E)dit and K)ill
           it before attempting to upload it again. Press ENTER...@pause@|9]
          -msg filename exists
   3374   [Posting file to file base...]
   3376   [@p=1@ uploaded files found. |9|P]
          -p1= number of extra files found in temp directory
          -msg files found but not processed yet
   3378   [Extra file found: @p=1@|9]
          -p1= extra file found in temp dir
   3380   [Uploads to this area are not allowed.]
          -msg area doesn't allow uploads
   3382   [A board event must be completed within the half hour. Upload at a
           later time.|9]
          -msg event will happen before upload is completed
   3384   [Uploading to @p=1@|9@showfile=c:\celerity\display\upload.txt@
          -p1= current area
          -upload.txt: textfile with uploads rules, restrictions, etc.
   3386   [Filename #@p=1@: |1]
          -p1= batch entry number
          -batch ul filename entry prompt
   3388   [That filename exists! If you had a botched upload, please E)dit and
           K)ill it before you try again.|9]
          -msg file exists
   3392   [Some files were not received...]
          -msg some files not rcvd
   3394   [Some extra files were received...]
          -msg extra files rcvd
   3396   [Granting @p=1@ minutes of time in compensation for your upload.|9]
          -p1= time online returned to user
   3397   [Clear your batch dl queue (@p=1@ items), {Y/N}? |1]
          -p1= number of items in batch
          -clear batch queue confirm
   3398   [File to remove from batch queue {1-@p=1@, ? to list}? |1]
          -p1= total number of files in batch queue
   3400   [@cls@--- @p=1@ Protocols ---|9]
          -p1= upload, download, batch upload or batch download
          -protocol list header
   3402   [Error reading protocol files...|9]
   3404   [{@p=1@}  @p=2@|9]
          -p1= letter option for protocol
          -p2= description of protocol
          -protocol listing
   3406   [{Q} to abort transfer.|9|9|9]
          -protocol listing trailer
   3408   [There are no files currently in the batch queue...]
          -msg no files found in buffer
   3410   [Disabling temporary sysop status...]
          -msg temp sysop (F6 from local) disabled
   3412   [@cls@--- Transfer Summary ---|9]
          -xfer summary header
   3414   [Filename Size cps Comment Cost Commission
          -@reol=-@|9]
          -xfer summary title bar
   3416   [|9]
          -batch status trailer
   3418   [N/A   No commission given.|9]
   3420   [-@reol=-@|9]
          -xfer summary trailer
   3422   [Do you wish to type @p=1@ to the screen {Y/N}? |1]
          -p1= filename to type
   3426   [@showfile=c:\celerity\display\bidirect.txt@]
          -bidirect.txt file displays pertinent bi-directional xfer info.
   3428   [H/S Link Received Files...]
          -msg bidirect files rcvd
   3432   [Filename to upload: |1]
          -bidir attach file input prompt
   3434   [File attach failed.|9]
          -msg bidir attach failed
   3436   [File attach successful!|9]
          -msg bidir attach successful
   3437   [@cls--- Batch Upload Protocols ---|9]
          -protocol listing batch ul header
   3438   [@cls--- Batch Download Protocols ---|9]
          -protocol listing batch dl header
   3439   [@cls--- Single Upload Protocols ---|9]
          -protocol listing single ul header
   3440   [@cls--- Single Download Protocols ---|9]
          -protocol listing single dl header
   3441   [@cls--- Bi-Directional Protocols ---|9]
          -protocol listing bi-directional header
   3450   [Located @p=1@ posts.|9]
          -p1= number of posts found
          -.QWK
   3452   [QWK: @p=1:L20.@|9]
          -p1= .QWK name of sub
   3453   [@p=1@@p=2@]
          -this is the .QWK post counter. Backspaces over previous value and
           inserts the new value
   3454   [Messages|9]
          -follows the above entry (i.e. 23 Messages)
          -.QWK
   3456   [Assembling the .QWK packet, please wait....]
   3460   [@cls@--- .QWK Options ---|9]
          -QWK options header
   3464   [Create a packet containing
           N)ew messages from all areas
           D)ate scan from a specific date
           %) 20% of messages from all areas
           G)lobal Scan Configure
           Q)uit from this menu
           Option: |1]
          -.QWK
   3466   [@cls@--- Creating the .QWK Packet ---|9]
          -creating packet header
   3468   [Your .QWK packet is exported to @p=1@@p=2@.|9]
          -p1= path to packet
          -p2= packet name
   3470   [Error transfering packet. Press ENTER to retry or type ABORT to
           abandon this packet.|9]
          -msg packet not sent
          -.QWK
   3472   [Update your newscan pointers {Y/N}? |1]
          -update scan pointers confirm prompt
          -.QWK
   3500   [Please re-logon to the other system. Your account on this system
           has been disabled.|9Press ENTER...@pause@@hangup@]
          -msg account removed from system #x, account on system #xx still
           active
          -multi system
   3502   [Your account has been deleted from this system.|9Press ENTER...
           @pause@@hangup@]
          -msg account deleted from all systems
          -multi system
   3504   [You do not have access to this system.|9Press ENTER...
           @pause@@hangup@]
          -msg access denied
          -multi system
   3510   [@cls@--- Auto-Message ---|9]
          -automessage header
   3512   [|9]
          -automessage trailer
*  3513   [|9]
          -don't know what this one is for
   3514   [|9]
          -art show header
*  3515   [|9]
          -don't know what this one is for
   3516   [|9]
          -art show trailer
*  3517   [|9]
          -don't know what this one is for
   3518   [--- System Notices ---|9]
          -system notice header
*  3519   [|9]
          -don't know what this one is for
   3520   [|9]
          -system notice trailer
   3600   [@pos=01, 20@Login ID: |1]
          -shell 0 user prompt
   3602   [@pos=01, 20@Login ID: |1]
          -shell 1 user prompt
   3604   [Username: |1]
          -shell 2 user prompt
   3606   [Login: |1]
          -shell 3 user prompt
   3608   [@pos=01, 20@Login ID: |1]
          -shell 4 user prompt
   3610   [@pos=01, 20@Login ID: |1]
          -shell 5 user prompt
   3612   [User not found.]
          -shell 0 bad username
   3614   [User not found.]
          -shell 1 bad username
   3616   [Account not found. Exiting.|9]
          -shell 2 bad username
   3618   [Login Incorrect.|9]
          -shell 3 bad username
   3620   [User not found.|9]
          -shell 4 bad username
   3622   [User not found.|9]
          -shell 5 bad username
   3624   [Password: |1]
          -shell 0 password prompt
   3626   [Password: |1]
          -shell 1 password prompt
   3628   [Password: |1]
          -shell 2 password prompt
   3630   [Password: |1]
          -shell 3 password prompt
   3632   [Password: |1]
          -shell 4 password prompt
   3634   [Password: |1]
          -shell 5 password prompt
   3636   [Password Incorrect!]
          -shell 0 password bad
   3638   [Password Incorrect!]
          -shell 1 password bad
   3640   [Password Incorrect!]
          -shell 2 password bad
   3642   [Password Incorrect!]
          -shell 3 password bad
   3644   [Password Incorrect!]
          -shell 4 password bad
   3646   [Password Incorrect!]
          -shell 5 password bad
   3700   [@p=1:L20@@p=2@]
          -p1= command for entry #1
          -p2= long/short BBS name
   3702   [@p=1:L20@@p=2@]
          -p1= command for entry #2
          -p2= system 2 name
   3704   [@p=1:L20@@p=2@]
          -p1= command for entry #3
          -p2= system 3 name
   3706   [@p=1:L20@Apply for an Account]
          -command for entry #4
   3708   [@p=1:L20@Check Validation Status]
          -command for entry #5
   3710   [@p=1:L20@Feedback to Sysops]
          -command for entry #6
   3712   [@p=1:L20@Chat with Sysops]
          -command for entry #7
   3713   [Password Accepted.]
          -Low speed lockout pass accepted
   3714   [@p=1:L20@Log off of Shell]
          -command for entry #8
   3716   [@p=1:L20@Upload to Sysop]
          -command for entry #9
   3718   [|9|9]
          -shell trailer
   3720   [@p=1@]
          -p1= shell prompt as defined in celsetup.exe
   3721   []
          -exterior shell background goes here. Designed to be an ANSI.
   3722   []
          -exterior shell #1 inactive
   3723   []
          -exterior shell #1 active
   3724   []
          -exterior shell #1 activation number
   3725   []
          -exterior shell #2 inactive
   3726   []
          -exterior shell #2 active
   3727   []
          -exterior shell #2 activation number
   3728   []
          -exterior shell #3 inactive
   3729   []
          -exterior shell #3 active
   3730   []
          -exterior shell #3 activation number
   3731   []
          -exterior shell #4 inactive
   3732   []
          -exterior shell #4 active
   3733   []
          -exterior shell #4 activation number
   3734   []
          -exterior shell #5 inactive
   3735   []
          -exterior shell #5 active
   3736   []
          -exterior shell #5 activation number
   3737   []
          -exterior shell #6 inactive
   3738   []
          -exterior shell #6 active
   3739   []
          -exterior shell #6 activation number
   3740   []
          -exterior shell #7 inactive
   3741   []
          -exterior shell #7 active
   3742   []
          -exterior shell #7 activation number
   3743   []
          -exterior shell #8 inactive
   3744   []
          -exterior shell #8 active
   3745   []
          -exterior shell #8 activation number
   3746   []
          -exterior shell #9 inactive
   3747   []
          -exterior shell #9 active
   3748   []
          -exterior shell #9 activation number
   3750   [@cls@--- Login Status ---|9]
          -p1= number of new uploads
          -p2= commission points
          -p3= validation points
          -p4= new messages since last call
          -p5= number of new users
          -p6= number of new e-mail waiting
          -p7= date last called
          -p8= time last called
          -p9= number of hack attempts
          -p0= last caller
          -make your own screen, I'll be damned if I'm going to type one out
           in this file for ya!
          -login status screen
   3755   [@cls@--- Transfer Status ---|9]
          -no parameters passed. Use the @xxx@ commands to make your own xfer
           status screen.
          -transfer status screen
   3760   [@cls@--- Message Status ---|9]
          -no parameters passed. Use the @xxx@ commands to make your own msg
           status screen.
          -message status screen
*  3761   [Command: |1]
          -I don't know what this prompt is for...
   3765   [@cls@--- Main System Status ---|9]
          -no parameters passed. Use the @xxx@ commands to make your own main
           user status screen.
          -main user status screen
   3770   [Transfers cost 1 point per @p=1@k. You are credited @p=2@ points/
           @p=1@k of upload. You receive 1/@p=3@ of cost for commission each
           time someone downloads a file you uploaded.|9]
          -p1= point value
          -p2= upload factor
          -p3= commission rate
          -transfer policy screen (commission)
   3775   [Transfers cost 1 point per @p=1@k. You are credited @p=2@ points/
           @p=1@k of upload.
          -p1= point value
          -p2= upload factor
          -transfer policy screen (file point system)
   3780   [All downloads are based on a General Ratio, which is an average of
           your Post/Call Ratio and your UL/DL ratio.
           Required Genr: @reqgenr@%    Your Current Ratio: @genr@%  |9]
          -no parameters passed, use additional @xxx@ commands to enhance this
   3782   [This is a DDD Disk Image.|9]
   3784   [This is a Teledisk Disk Image.|9]
   3786   [Individual files cannot be extracted from .ZOO archives.|9]
   3788   [That file may not be extracted from an archive.|9]
   3790   [That file is not a valid archive.|9]
          -msg invalid archive
   3792   [That DOS pathname (@p=1@) does not exist. Create it {Y/N}? |1]
          -p1= pathname
          -msg invalid DOS path, create confirm
   3794   [Error creating directory @p=1@...
           Note that when running Celerity under certain network conditions,
           new directories must be created from DOS.|9]
          -p1= pathname
          -msg error creating directory
   3800   [@cls@--- Top Five All Time Posters ---|9|9]
          -top five all time poster header
   3802   [--- Top Five Monthly Posters ---|9|9]
          -top five monthly poster header
   3804   [@cls@--- Top Five All Time Uploaders ---|9|9]
          -top five all time ul header
   3806   [--- Top Five Monthly Uploaders ---|9|9]
          -top five monthly ul header
   3808   [@cls@--- Top Five All Time Downloaders ---|9|9]
          -top five all time dl header
   3810   [--- Top Five Monthly Downloaders ---|9|9]
          -top five monthly dl header
   3812   [{@p=1@} @p=2:R30@ with @p=3@ posts.|9]
          -p1= position number
          -p2= user name
          -p3= number of posts
          -top five all time poster listing
   3814   [{@p=1@} @p=2:R30@ with @p=3@ posts.|9]
          -p1= position number
          -p2= user name
          -p3= number of posts
          -top five monthly poster listing
   3816   [{@p=1@} @p=2:R30@ uploaded @p=5@k|9]
          -p1= position number
          -p2= user name
          -p3= number of uploads
          -p4= uploaded bytes
          -p5= uploaded k
          -top five all time uploader listing
   3818   [{@p=1@} @p=2:R30@ uploaded @p=5@k|9]
          -p1= position number
          -p2= user name
          -p3= number of uploads
          -p4= uploaded bytes
          -p5= uploaded k
          -top five monthly uploader listing
   3820   [{@p=1@} @p=2:R30@ uploaded @p=5@k|9]
          -p1= position number
          -p2= user name
          -p3= number of downloads
          -p4= downloaded bytes
          -p5= downloaded k
          -top five all time downloader listing
   3822   [{@p=1@} @p=2:R30@ uploaded @p=5@k|9]
          -p1= position number
          -p2= user name
          -p3= number of downloads
          -p4= downloaded bytes
          -p5= downloaded k
          -top five monthly downloader listing
   3824   [|9|9]
          -top five listing trailer
   3826   [Not enough time left...]
          -msg insufficient time remaining for download
   3828   [Not enough time until board event occurs...]
          -msg insufficient time remaining till board event
   3830   [You do not have enough file points to download that file.|9]
   3832   [But you are entitled to a loan of up to @p=1@ points...]
          -p1= loan amount + u/d points available
   3834   [Upload something worthwhile to gain file points...]
          -msg no file point loans on system (celsetup.exe)
   3836   [That would put you over your limit of @p=1@k per day.]
          -p1= daily download limit
   3838   [File newscan aborted...]
   3840   [That directory is protected. You may not access it.]
          -msg protected dir
   3842   [Invalid area number. Create a new area {Y/N}? |1]
          -file areas
   3844   [Name of new Area: |1]
          -new area name input prompt
   3846   [Existing area files detected. Sharing the area.|9]
   3848   [That area does not exist...]
   3850   [That file is offline and may not be downloaded at this time.|9]
   3852   [That file has not yet been validate and may not be dowloaded at
           this time. |9]
   3854   [That file requires special permission to download.|9]
   3856   [Enter the download password for @p=1@: |1]
          -p1= filename to be downloaded
   3858   [That file is reserved for another user. You may not download it.|9]

          NOTICE: In the following entries the file separators are the color
          changes between fields in the file listings.

   3860   [@p=1:L4@]
          -p1= file number
          -file listing
   3862   [@p=1:L8@]
          -p1= filename (no extension), filename uppercase, filename lowercase
          -file listing
   3863   []
          -file separator
          -file listing
   3864   [.ZIP]
          -.zip extension
          -file listing
   3866   [.GIF]
          -.gif extension
          -file listing
   3868   [.ARJ]
          -.arj extension
          -file listing
   3870   [.LZH]
          -.lzh extension
          -file listing
   3872   [.LHA]
          -.lha extension
          -file listing
   3874   [.TXT]
          -.txt extension
          -file listing
   3876   [.DOC]
          -.doc extension
          -file listing
   3878   [.ARC]
          -.arc extension
          -file listing
   3880   [.NFO]
          -.nfo extension
          -file listing
   3882   [.@p=1:R3@]
          -p1= other extension, not listed above
          -file listing
   3890   [RES: @p=1:L15@]
          -p1= GIF/TGA/BMP/TIF resloution info on file
          -file listing
   3892   [@p=1:L20@]
          -p1= program name
          -file listing
   3894   [@p=1:R2@/@p=2:L2@]
          -p1= current disk number
          -p2= max disk number
          -file listing
   3896   [@p=1:R4@k]
          -p1= file size
          -file listing
   3898   [Off]
          -status, file listing
   3900   [Take]
          -status, file listing
   3902   [Resv]
          -status, file listing
   3904   [New]
          -status, file listing
   3906   [Ask]
          -status, file listing
   3908   [Free]
          -status, file listing
   3910   [@p=1:R4@]
          -p1= file points charged. Will display if fp chg > 0 and user is not
           exempt from fps, if system uses fps, if area is not a free area.
          -file listing
   3912   [@p=1:L8@]
          -p1= date file was uploaded
          -file listing
   3914   [@p=1:L10@]
          -p1= file uploader
          -file listing
   3916   [@p=1:L3@]
          -p1= number of times file has been downloaded
          -file listing
   3918   [*]
          -file separator ext desc
          -file listing
   3920   [ ]
          -file separator no ext desc
          -file listing
   3922   [|9]
          -file separator end of line
          -file listing
   3924   [|9]
          -file separator extra line
          -file listing
   3926   [-@reol=-@|9]
          -file list trailer
   3928   [@cls@#]
          -file listing header
   3930   [Filename]
          -file listing title bar
   3932   [.Ext]
          -file listing title bar
   3933   [    ]
          -file listing title bar (post name)
   3934   [Program Name]
          -file listing title bar
   3936   [Disks]
          -file listing title bar
   3938   [Size]
          -file listing title bar
   3940   [Cost]
          -file listing title bar
   3942   [Date]
          -file listing title bar
   3944   [Uploader]
          -file listing title bar
   3946   [Dn]
          -file listing title bar
   3948   [Description]
          -file listing title bar
   3950   [---@p=1@-@reol=-@|9]
          -p1= area name
          -file listing title bar
   3960   [Number of files: @p=1@|9]
          -p1= number of files in area
          -file listing
   3962   [Q)uit or N)onstop: |1]
          -file listing continue prompt
   3980   [Pathname to show dir of {@p=1@}: |1]
          -p1= default pathname for area
   3982   [No Volume Label|9|9]
          -msg no vol label on drive
   3984   [Volume Label: @p=1@|9|9]
          -p1= vol label of drive
   3986   [Total # of files: @p=1@|9]
          -p1= number of files in listing
   3988   [Free Space: @p=1@|9]
          -p1= free space on drive
   4000   [That file is personal. You may not view it.|9]
          -msg personal file
   4002   [@cls@--- Archive File List ---|9]
          -archive listing header
   4004   [Error. Unable to identify this archive by its extenstion.
           Would you like to select the archive type manually {Y/N}? |1]
          -msg cannot identify archive
   4006   [Select from the following list:
           1) Pkzip    2) LHArc/LHA    3) Arj         4) DDD
           4) TD0      5) Arc/Pkarc    6) Pak/Pkpak   8) Zoo    Q)uit
           Option: |1]
          -select archive type listing
   4008   [|9|9]
          -archive listing trailer
   4010   [@cls@--- File Information ---|9]
          -file information header
   4012   [|9|9]
          -file information trailer
   4014   [@cls@--- Type File ---|9]
           Filename: @p=1@           UL By: @p=2@             Cost: @p=3@  ]
          -p1= filename
          -p2= uploader of file
          -p3= point cost
          -p4= date uploaded
          -p5= file size
          -file type header
   4016   [Resolution: @p=1@]
          -p1= GIF/TGA resolution
          -file type .gif
   4018   [Ready to view this file {Y/N}? |1]
          -view/type file confirm
   4020   [[|9|9]
          -view/type file trailer
   4022   [@cls@--- File Area Listing ---|9]
          -file area list header
   4024   [View extended information {Y/N}? |1]
          -view ext info confirm
   4026   [##   Area Name    # Files       ##   Area Name     #Files|9]
          -area list title bar (NOT extended view)
   4028   [##   Area Name    # Files     Rights|9]
          -area list title bar (extended view)
   4030   [-@reol=-@|9]
          -area listing trailer
   4032   [Transfer Area {? to list}: |1]
          -change area prompt
   4034   [No such area....|9]
          -msg invalid area specified
   4036   [@cls@Current area is set to #@p=1@, @p=2@.|9]
          -p1= area number
          -p2= area name
          -area changed prompt
   4040   [@cls@--- Upload Data Entry ---|9]
          -parameter passed is free space on drive
   4042   [Your upload of @p=1@ failed its archive validity test. Please
           verify archive integrity before attempting to upload.|9]
          -p1= filename
*  4050   [Your upload of @p=1@ failed its archive validity test. Please
           verify archive integrity before attempting to upload.|9]
          -p1= filename
          -I don't know if this entry is necessary or not....
   4052   [A virus has been detected in your upload of @p=1@!
           Please verify that your files are virus free before uploading.|9]
          -p1= filename
   4060   [Processing your upload of @p=2@....|9]
          -p1= filepath
          -p2= filename
   4061   [File has been processed.|9|9]
   4062   [Commenting your upload ...|9]
          -p1= file path
          -p2= filename, ext
   4064   [Verifying upload integrity for @p=2@...|9]
          -p1= file path
          -p2= filename, ext
   4066   [Virus scanning @p=2@....|9]
          -p1= file path
          -p2= filename, ext
   4068   [Converting archive format of @p=2@...|9]
          -p1= file path
          -p2= filename, ext
   4070   [Cleaning ads out of @p=2@...|9]
          -p1= file path
          -p2= filename, ext
   4072   [Commenting your upload of @p=2@...|9]
          -p1= file path
          -p2= filename
   4080   [You may determine the download cost of this file. In general,
           standard files should be normal cost. Large programs, low-demand,
           and beta/pre-release programs should be half cost. Use double cost
           only when it is a very special upload...
           N)ormal Cost : @p=1@   D)ouble Cost: @p=2@   H)alf Cost: @p=3@
           Q)uarter Cost: @p=4@   O)ne Point  :  1      F)ree     :  0 |9|9]
   4082   [Option {@p=1@}: |1]
          -cost entry prompt
   4084   [@p=1@ has been auto-validated. You have been granted @p=2@ file
           points for the upload...|9]
          -p1= filename
          -p2= number of filepoints granted
   4086   [@cls@--- Verify Transfer Areas ---|9This function will step through
           all file areas in a file section and verify the data name (.DIR/
           .DES) existance and the existance of the file path.|9]
          -verify areas header
   4088   [The data file {@p=1@} for @p=2@ is invalid.
           C)reate a new one  R)ename the old one  S)earch for the right one
           Option: |1]
          -invalid data file correction prompt
   4090   [Error creating data file.]
          -msg error in creation of data file
   4092   [New path to data file: |1]
          -new data file path entry prompt
   4094   [Drive spec to search (i.e. C:): |1]
          -drive name to search for data files
   4096   [@p=1@ found at @p=2@. Use this data file {Y/N}? |1]
          -p1= data name
          -p2= path where found
          -data file use confirm
   4098   [Press any key to abort auto logoff countdown...|9|9]
          -msg abort automatic logoff "Y"
   4099   [@xpos=01@(@p=1@)]
          -p1= count number (countdown timer)
   4100   [@p=1:L12@:@p=2:R8@]
          -p1= dos name
          -p2= file size
          -dos directory listing
   4101   [Read Only]
          -status dos dir
   4102   [Hidden]
          -status dos dir
   4103   [System]
          -status dos dir
   4104   [Vol ID]
          -status dos dir
   4105   [Dir]
          -status dos dir
   4106   [Archive]
          -status dos dir
   4107   [Shareable]
          -status dos dir
   4109   [|9]
          -end dos dir
   4110   [@p=1:L3@ @p=2:L30@ @p=3:L5@]
          -p1= area number
          -p2= area name
          -p3= number of files
          -extended area listing
   4112   [U/L ]
          -status area listing
   4113   [    ]
          -status area listing (no uploads)
   4114   [D/L ]
          -status area listing
   4115   [    ]
          -status area listing (no downloads)
   4116   [N/R ]
          -status area listing
   4117   [    ]
          -status area listing (ratios enforced)
   4118   [Free]
          -status area listing
   4119   [    ]
          -status area listing (no free files)
   4120   [Slow]
          -status area listing
   4121   [    ]
          -status area listing (no slow drives)
   4122   [Sc  ]
          -status area listing
   4123   [    ]
          -status area listing (not scanned)
   4124   [ScA ]
          -status area listing
   4125   [    ]
          -status area listing (do NOT scan)
   4126   [Idz ]
          -status area listing
   4127   [    ]
          -status area listing (do NOT import id.diz files)
   4128   [-Opt]
          -status area listing
   4129   [    ]
          -status area listing (do not allow users to ask for files)
   4130   [|9]
          -area listing extended trailer
   4132   [@p=1:L3@ @p=2:L30@ @p=3:L5@]
          -p1= area number
          -p2= area name
          -p3= number of files in area
          -area listing normal
   4133   [|9]
          -area list normal trailer
   4134   [ ]
          -area list normal spacer
   4140   [@cls@--- Upload Area Listing ---|9
           ##   Area Name     Files|9-@reol=-@|9]
          -upload area list header
   4142   [@p=1:L3@ @p=2:L30@ @p=3:L5@ ]
          -p1= area number
          -p2= area name
          -p3= number of files
          -upload area listing
   4145   [Destination for @p=1@ {? to list, ENTER (@p=2@)}: |1]
          -p1= filename being uploaded
          -p2= default destinaton
          -upload file destination prompt
   4150   [@POS=07,07@File Name: @P=1@@POS=40,07@ File Size: @P=2@]
          -p1= file name
          -p2= file size
   4152   [@POS=07,09@Graphic Parameters:  @PARAM=2@]
          -p2= GIF/TGA resolution
   4153   [@POS=03,09@{@P=1@} Program Title:       @PARAM=2@]
          -p2= program name
   4154   [@POS=28,09@]
          -enter program name prompt
   4155   [@POS=03,11@{@P=1@} Private For:    @P=2:L40@]
          -user name file is reserved for
   4156   [@POS=03,10@Should this file be private {Y/N}? |1]
          -file private confirm
   4157   [@POS=03,10@@ceol@]
          -file private entry prompt
*  4158   [@POS=03,12@{@P=1@} Disk Numbers:   @PARAM=2:L2@ of |7@PARAM=3@]
          -p1= I don't know what this one is
          -p2= beginning disk number
          -p3= max disk number
   4159   [@POS=03,10@ |1]
          -enter first disk number prompt
   4160   [@POS=34,12@  @XPOS=34@ |1]
          -enter next disk number prompt
*  4161   [@POS=03,13@{@P=1@} Download Password:   @PARAM=2@]
          -p1= I don't know what this one is
          -p2= download password
   4162   [@POS=28,13@Should this file have a password {Y/N}? |1]
          -password for file confirm
   4163   [@POS=28,13@Desired Password: |1]
          -password entry prompt
*  4164   [@POS=03,15@@ceol@@POS=03,16@@ceol@@POS=03,17@@ceol@@POS=03,18@
           @ceol@@POS=03,19@@ceol@@POS=03,20@@ceol@@POS=03,21@@POS=03,14@
           {@P=1@} File Description: @POS=25,14@]
          -p1= I don't know what this one is
          -file descripton display
   4165   [@POS=03,15@@ceol@@POS=03,16@@ceol@@POS=03,17@@ceol@@POS=03,18@
           @ceol@@POS=03,19@@ceol@@POS=03,20@@ceol@@POS=03,21@@ceol@
           @POS=25,14@@ceol@@XPOS=25@]
          -file description input prompt
   4166   [@POS=03,22@{@P=1@} Extended Description: @P=2@]
          -extended description input prompt
   4167   [@POS=28,22@|3 Add an extended description {Y/N}? |1]
          -ext desc input confirm
   4170   [@CLS@--- Upload Data Entry ---|9Q)uit and Save |1]
          -upload data entry header
   4172   [Edit upload data {? to redraw}: |1]
          -edit entries prompt
   4190   [What is the program title: |1]
          -title input prompt
   4191   [How many disks/files total for this program: |1]
          -total disk number input prompt
   4192   [What disk/file number is this: |1]
          -current disk number input prompt
   4193   [Is this file personal for a single user {Y/N}? |1]
          -file personal input confirm
   4194   [Enter the FULL alias of the user this file is for: |1]
          -file personal user name input prompt
   4195   [PW required to DL this file {ENTER for none}: |1]
          -download pw input prompt
   4196   [Enter the file description below. ENTER on a blank line to end.
           Lines may be up to @p=2@ characters in length. Wordwrap is
           supported.|9-@reol=-@|9]
          -p1= filename
          -p2= number of columns in description field
          -description input instructions
   4197   [(> |1]
          -description field input prompt
   4200   [Error. @p=1@]
          -p1= error which has occured
   4202   [That user name is invalid.]
          -msg invalid username, file personal
   4300   [@p=1:L2@ @p=2:R30@]
          -p1= topic number
          -p2= topic title
          -voting topic listing
   4302   [Voted|9]
          -status topic voting
   4304   [Pending|9]
          -status topic voting
   4306   [@cls@--- Voting Topics ---|9]
          -topic voting header
   4308   [#   Topic      Status|9]
          -topic voting title bar
   4310   [|9|9]
          -topic voting trailer
   4312   [Create a new voting topic {Y/N}? |1]
   4314   [Voting topic created...|9]
   4316   [@cls@--- Voting Topic Deletion ---|9]
          -topic voting deletion header
   4318   [Delete which topic {1..@p=1@}: |1]
          -p1= max number of topics
          -topic voting deletion prompt
   4320   [@cls@--- Voting Topic Editor ---|9]
          -topic voting editor header
   4322   [Edit which topic {1..@p=1@}: |1]
          -p1= max number of topics
          -topic voting edit prompt
   4324   [@cls@--- Add a Voting Choice ---|9
           Please word your choice carefully. You will NOT be able to edit it
           later....|9]
          -topic voting choice add header
   4326   [New Choice: |1]
          -topic voting choice add prompt
   4328   [@cls@--- Cast Your Vote ---|9
           Topic: @p=1@|9|9]
          -p1= topic being voted on
          -cast vote header
   4329   [Ballot Results: |9]
          -ballot result title bar
   4330   [@cls@--- Edit Ballot ---|9
           T) Ballot title    R) Required vote @p=2@ on @p=3@
           U) User write-ins  @p=4@       ]
          -p1= ballot title
          -p2= reqd vote on previous ballot
          -p3= previous ballot number
          -p4= allow user write-ins {Yes/No}
          -edit ballot header
   4332   [{@p=1:R2@}  Choice: @p=2@|9]
          -p1= choice number
          -p2= choice description
          -edit ballot title bar
   4335   [Change which: |1]
          -edit ballot option choice prompt
   4336   [New Choice {@p=1@}: |1]
          -p1= previous choice
          -edit ballot choice input prompt
   4337   [New Title {@p=1@}: |1]
          -p1= previous title
          -edit ballot title input prompt
   4338   [Require users to vote on previous ballot #{@p=1@}: |1]
          -p1= previous ballot number, default
   4339   [Required previous choice (0 for none): |1]
          -reqd choice chosen on previous to vote on this one
   4340   [Allow users to add choices {Y/N}? |1]
          -user choice input confirm
   4345   [{@p=1:R2@}  @p=2@|9]
          -p1= choice number
          -p2= choice description
          -vote choice option display
   4346   [A)dd a write in entry|9]
          -add entry choice selection
   4348   [Q)uit|9
           Cast your vote: |1]
          -choice input prompt
   4350   [Vote on topic {1..@p=1@/ Q to quit}: |1]
          -p1= max topic number
   4352   [Scanning for new voting topics....|9]
   4354   [Tabulating votes, please wait....|9]
   4355   [No votes have been cast yet.|9]
          -msg rcvd when tabulating votes, and none have been cast
   4356   [Uncommitted votes....@p=1:L4@   @p=2:R3@%|9]
          -p1= number of uncommitted votes
          -p2= percent of uncommitted votes
   4357   [@p=1:L29.@@p=2:L4@  @p=3:R3@%  @p=4@|9]
          -p1= voting choice
          -p2= votes cast
          -p3= percentage FOR
          -p4= current users vote
          -display voting results
   4358   [View Results for {1..@p=1@}: |1]
          -p1= max number of topics
          -view results prompt

          NOTICE: In the following entries p1= command letter or number for
          that option.

   4400   [@POS=50,07@{@P=1@}  User ID.....@P=2@@CEOL@]
          -p2= user alias
   4402   [@POS=50,08@{@P=1@}  Last Call...@P=2@@CEOL@]
          -p2= date of last call
   4404   [@cls@--- Edit User ---|9]
          -edit user header
   4406   [@POS=01,23@@CEOL@Edit User: |1]
          -edit user name input prompt
   4408   [@POS=50,09@@CEOL@{@P=1@} Quit and Discard Changes]
   4409   [@POS=50,10@@CEOL@{@P=1@} Quit and Save Changes]
   4410   [@POS=50,11@@CEOL@{@P=1@} Redraw screen]
   4411   [@POS=01,20@@CEOL@{@P=1@} Misc. User Registers]
   4412   [@POS=27,20@{@P=1@} User Access Flags]
   4413   [@POS=53,20@{@P=1@} Sysop Access Flags]
   4414   [@POS=01,21@@CEOL@{@P=1@} Transfer Statistics]
   4415   [@POS=27,21@@CEOL@{@P=1@} Exemptions]
   4416   [@POS=53,21@{@P=1@} Ratios/Posting Details]
   4417   [@POS=01,22@{@P=1@} Security Levels]
   4418   [@POS=27,22@{@P=1@} Information Scripts]
   4419   [@POS=53,22@{@P=1@} >UNUSED<]
   4420   [@POS=01,07@{@p=1@} Alias............ @P=2@]
          -p2= user alias
   4421   [@POS=02,08@{@p=1@} Real Name........ @P=2@]
          -p2= user real name
*  4422   [@POS=01,08@{@p=1@} Real Name........ @P=2@]
          -p2= I have to check on this
   4424   [@POS=01,09@{@p=1@} Internet Name.... @P=2@]
          -p2= user internet name
   4426   [@POS=01,10@{@p=1@} Voice Phone...... @P=2@]
          -p2= user voice phone
   4428   [@POS=01,11@{@p=1@} Data Phone....... @P=2@]
          -p2= user data phone
   4430   [@POS=01,12@{@p=1@} Fax Phone........ @P=2@]
          -p2= user fax phone
   4432   [@POS=01,13@{@p=1@} Password......... @P=2@]
          -p2= user password
   4434   [@POS=01,14@{@P=1@} Expiration Date.. @P=2@]
          -p2= exp date on user account
   4436   [@POS=01,15@{@p=1@} Public Note...... @P=2@]
          -p2= user note
   4438   [@POS=01,16@{@p=1@} Private Note..... @P=2@]
          -p2= user private/sysop note
   4440   [@POS=01,17@{@p=1@} Address Line 1... @P=2@]
          -p2= street adress
   4442   [@POS=01,18@{@p=1@} Address Line 2... @P=2@]
          -p2= city, state, zip
   4444   [@POS=01,23@@CEOL@Abandon all changes to this user {Y/N}? |1]
          -abandon changes confirm
   4446   [@POS=24,07@]
          -change user alias input prompt
   4448   [@POS=24,08@]
          -change user real name input prompt
   4450   [@POS=24,09@]
          -change user internet name input prompt
   4452   [@POS=24,10@]
          -change user voice phone input prompt
   4454   [@POS=24,11@]
          -change user data phone input prompt
   4456   [@POS=24,12@]
          -change user fax phone input prompt
   4457   [@POS=24,13@]
          -change user pw input prompt
   4458   [@POS=24,14@]
          -change user exp date input prompt
   4460   [@POS=24,15@]
          -change user's user note input prompt
   4462   [@POS=24,16@]
          -change user's private/sysop note input prompt
   4464   [@POS=24,17@]
          -change user street address input prompt
   4465   [Sorry, that user could not be located....]
          -msg invalid username
   4466   [@POS=24,18@]
          -change user city,state,zip input prompt
   4467   [Is @p=1@ the user you were looking for {Y/N}? |1]
          -p1= username
   4468   [@POS=01,23@@CEOL@Erase this entry {Y/N}? |1]
          -erase entry confirm
   4469   [Delete which user? |1]
          -username to delete input prompt
   4470   [@cls@--- Access Exemption Flags ---|9
           @POS=01,10@Q)uit  ]
          -exemption flag header
   4471   [@POS=01,05@{1}  PCR Exempt]
   4472   [@POS=01,05@{1}  PCR Enforced]
   4473   [@POS=01,06@{2}  UDR Exempt]
   4474   [@POS=01,06@{2}  UDR Enforced]
   4475   [@POS=01,07@{3}  GenR Exempt]
   4476   [@POS=01,07@{3}  GenR Enforced]
   4477   [@POS=01,08@{4}  Undefined Exempt]
   4478   [@POS=01,08@{4}  Undefined Enforced]
   4479   [@POS=01,09@{5}  File Points Exempt]
   4480   [@POS=01,09@{5}  File Points Enforced]
   4481   [@POS=01,22@Toggle Which Exemption: |1]
          -toggle exemption prompt
   4482   [@cls@--- Access Flag Editor ---|9]
          -access flag editor header
   4483   [@POS=01,07@@CEOL@@POS=01,08@@CEOL@@POS=01,06@Flags Enabled For : |1]
          -user flag enabled display
   4484   [@P=1:L4@]
          -user flag spacer
   4485   [Flag To Toggle: |1]
          -toggle user flags input prompt
   4486   [New User Found: @P=1@ {@P=2@}
           Current Levels: @P=3@ / @P=4@
           Infoforms Completed: @P=6@ @P=7@ @P=8@ @P=9@ @P=0@|9]
          -p1= alias
          -p2= real name
          -p3= user level
          -p4= transfer level
          -p5= file points
          -p6= infoform 1
          -p7= infoform 2
          -p8= infoform 3
          -p9= infoform 4
          -p0= infoform 5
   4487   [New access level for @P=1@ {@P=2@}: |1]
          -p1= user being edited
          -p2= current access level
   4488   [New xfer access level for @P=1@ {@P=2@}: |1]
          -p1= user being edited
          -p2= current transfer level
   4489   [View Infoform # {1-5 L)evel E)dit Q)uit}: |1]
          -view user infoform option prompt
   4490   [@cls@--- User Scan Function ---|9]
          -scan users header
   4491   [Mininmum Level to scan for {0}: |1]
          -min scan level input prompt
   4492   [Maximum Level to scan for {0}: |1]
          -max scan level input prompt
   4493   [Delete @p=1@ {Y/N}? |1]
          -p1= user to delete
          -user scan delete confirm
   4494   [User to transfer to: |1]
          -load user input prompt
   4496   [That user only has @p=1@ minutes left. New time remaining: |1]
          -p1= user's remaining time online
          -add/remove time input prompt
   4497   [{@p=1@} @p=2:L30@ Completed|9]
          -p1= infoform number
          -p2= infoform description
          -infoforms completed display
   4498   [{@p=1@} @p=2:L30@ Incomplete|9]
          -p1= infoform number
          -p2= infoform description
          -infoforms not completed display
   4499   [View which infoform? |1]
          -user edit view infoform input prompt
   4500   [Display which news bulletin: |1]
          -news display input prompt
   4501   [@pause@@cls@]
          -user infoform display trailer
   4502   [There is no such news bulletin!]
          -msg invalid choice of news to view
   4503   [@cls@]
          -user infoform display header
   4504   [|9|9]
          -news listing trailer
   4506   [@cls@--- List News Bulletins ---|9
           #   Name|9-@reol=-@|9]
          -news listing title bar
   4508   [@p=1@   @p=2@|9]
          -p1= news number
          -p2= news title
          -news listing
   4510   [Delete which news item {1..@p=1@}: |1]
          -p1= max news number
          -delete news input prompt
   4512   [News entry deleted.]
   4514   [This entry is not yours. You may not delete it.]
          -msg not current user's entry
   4516   [Is this the item you wish to delete {Y/N}? |1]
          -news delete confirm
   4517   [Delete the display file for this news also {Y/N}? |1]
          -news display file delete confirm
   4518   [Please describe the news item you are about to write.
           (> |1]
          -news description input prompt
   4520   [@cls@--- News Bulletin! ---|9
           "@p=5@" by @p=1@
           Written on @p=3@ @p=4@ at @p=2@
          -p1= author of news
          -p2= origin
          -p3= date written
          -p4= time written
          -p5= description of news
          -news display header
   4522   [|9|9]
          -news display trailer
   4524   [Access string to read news: |1]
          -access string to view news input prompt
   4526   [Force users to read this news at every login {Y/N}? |1]
   4528   [DOS filename for this news: |1]
          -dos filename for news input prompt
   4530   [Error writing news....|9]
   4600   [@cls@--- Edit Transfer Stats for @p=2:R30@---|9
           @POS=01,05@User Real Name: @P=1@
           @POS=01,17@Q)uit ]
          -p1= user real name
          -p2= user alias
          -edit user xfer stats header
   4602   [@POS=01,23@Edit XFer Stats: |1]
          -edit xfer stats option prompt

          NOTICE: In the following entries p1 is the option letter or number
          used to edit each statistic.

   4605   [@POS=01,07@{@p=1@} Total Uploads............@p=2@@ceol@]
          -p2= total number user uploads
   4606   [@POS=30,07@@CEOL@]
          -edit total number user upload input prompt
   4607   [@POS=01,08@{@p=1@} Uploads This Month.......@p=2@@ceol@]
          -p2= monthly user uploads
   4608   [@POS=30,08@@CEOL@]
          -edit user monthly uploads input prompt
   4609   [@POS=01,09@{@p=1@} Total Bytes Uploaded.....@p=2@@ceol@]
          -p2= total user bytes uploaded
   4610   [@POS=30,09@@CEOL@]
          -edit total user bytes uploaded input prompt
   4611   [@POS=01,10@{@p=1@} Monthly Uploaded Bytes...@p=2@@ceol@]
          -p2= user monthly bytes uploaded
   4612   [@POS=30,10@@CEOL@]
          -edit user monthly bytes uploaded input prompt
   4613   [@POS=01,11@{@p=1@} Total Downloads..........@P=2@@CEOL@]
          -p2= user total number downloads
   4614   [@POS=30,11@@CEOL@]
          -edit user total number downloads input prompt
   4615   [@POS=01,12@{@p=1@} Downloads This Month.....@p=2@@ceol@]
          -user number dl this month
   4616   [@POS=30,12@@CEOL@]
          -edit user number dl monthly input prompt
   4617   [@POS=01,13@{@p=1@} Total Bytes Downloaded...@p=2@@ceol@]
          -p2= user total bytes dl
   4618   [@POS=30,13@@CEOL@]
          -edit user total bytes dl input prompt
   4619   [@POS=01,14@{@p=1@} Monthly Downloaded Bytes.@p=2@@ceol@]
          -p2= user monthly bytes dl
   4620   [@POS=30,14@@CEOL@]
          -edit user monthly bytes dl input prompt
   4621   [@POS=01,15@{@p=1@} Average CPS Rate.........@p=2@@ceol@]
          -p2= user avg cps
   4622   [@POS=30,15@@CEOL@]
          -edit user avg cps input prompt
   4623   [@POS=01,16@{@p=1@} File Points..............@p=2@@ceol@]
          -p2= user file points
   4624   [@POS=30,16@@CEOL@]
          -edit user file points input prompt
   4630   [@cls@--- Ratios/Limits for @p=2:r30@ ---|9
           @POS=01,06@User Real Name: @P=1@|9|9]
          -p1= user real name
          -p2= user alias
          -edit user ratios header
   4632   [Required UDR {0=@P=1@%/CR=@P=2@%}: |1]
          -p1= default UDR
          -p2= user's current reqd UDR
   4634   [Required PCR {0=@P=1@%/CR=@P=2@%}: |1]
          -p1= default PCR
          -p2= user's current reqd PCR
   4636   [Required GenR {0=@P=1@%/CR=@P=2@%}: |1]
          -p1= default GenR
          -p2= user's current reqd GenR
   4638   [Daily D/L Limit (K) {CR=@P=1@}: |1]
          -p1= user's current daily dl limit
   4640   [Time Allotted Per Day {0=Level default/CR=@P=1@}: |1]
          -p1= user's current daily time limit
   4642   [Time Left Today {CR=@P=1@}: |1]
          -p1= user's current time left today
   4643   [Access Verified!|9]
          -xfer area access verified
   4644   [Scanning Message Sub: {@p=1@} |9]
          -p1= msg sub currently being scanned
   4645   [Scanning Conference : {@p=1@} |9]
          -p1= conf currently being scanned
   4650   [Scan Transfer Area @P=1@ {? for Help}: |1]
          -p1= current xfer area
          -scan xfer area prompt
   4651   [@ypos=22@@ceol@Scan Conference @P=1@ {? for help}: |1]
          -p1= current conf area
          -scan conf areas prompt
   4652   [S)kip this section
           R)emove from newscan configuration
           E)nter area, but don't newscan
           A)bort from this conference tree
           CR) Continue Scan
           Q)uit|9    ]
           -scan conf/xfer area help
   4653   [S)kip This Entire Sub-Conference
           R)emove Sub-Conference From NewScan Configuration
           A)bort from this conference tree
           CR) Continue Scanning Sub-Conference
           Q)uit|9  ]
          -conf sub-area scan help
   4654   [@bottompos@@ceol@Scan Message Base @P=1@ {? for Help}? |1]
          -p1= current msg area
   4656   [S)kip this section
           R)emove from newscan configuration
           P)ost message in this message base
           A)bort scan of this conference tree
           CR) Continue Scan
           Q)uit|9 ]
          -msg base scan help
   4658   [Switching to Area @P=1@|9|9]
          -p1= name of conf item being switched to
          -changing to conf item xxx prompt
   4700   [@cls@Sub: @p=1@@xpos=50@@p=2:R4@ of @p=3@
           Title: @P=4:L34         @Re: Msg @p=8:R4@ by @p=5@]
          -p1= sub name
          -p2= message ID number
          -p3= max msg number on sub
          -p4= message title
          -p5= name of recipient
          -p6= address of recipient (network address)
          -p7= number of times msg has been read
          -p8= msg number this one was a reply to
          -p9= msg number of first reply to original message
          -message header, part 1
   4701   [From: @P=3@ (@p=5@)   @xpos=55@ On @p=1@
           @reol=@|1|9]
          -p1= date posted
          -p2= time posted
          -p3= author
          -p4= author address (network address)
          -p5= author's user note
          -message header, part 2
   4702   [Posted By: ...Anonymous...
           @REOL=@|9|1]
          -p1= anonymous string as defined in celsetup.exe
          -message header, anonymous
   4705   [Sorry, no new messages at this time!
           Active messages are @p=2@ through @p=1@.|9]
          -p1= first valid message number
          -p2= last valid message number
   4706   [|1]
          -message trailer
   4710   [@cls@--- Message Title Listing ---|9]
          -msg title listing header
   4712   [No messages to list.]
          -msg no msgs in sub to list
   4714   [Start list from #{@P=2@-@P=1@}: |1]
          -p1= first msg in sub
          -p2= last message in sub
          -msg listing input prompt
   4715   [@cls@--- Quick Title Listing ---|9]
          -parameters: starting msg, starting msg +20
          -quick title listing header
   4716   [#   Title                   Author            Date
           @REOL=@|9]
          -msg listing title bar
   4718   [@P=1:L4@@P=2:L25@@P=3:L18@@P=4@|9]
          -msg listing
   4719   [|9|9]
          -msg listing trailer
   4720   [@cls@--- Export a Message ---|9]
          -export msg header
   4722   [# to Export {CR=@P=1@/? to List/Q to Abort}: |1]
          -export msg # input prompt
   4723   [Invalid message number.|9]
          -msg invalid msg number chosen
   4724   [Error exporting messages.]
   4725   [Name to export message to {@p=1@}? |1]
          -p1= default filename to export msg to
   4726   [Path to export message to {@p=1@}? |1]
          -p1= user path to export msg to
   4727   [Please wait while exporting message...]
   4728   [Message exported to @P=1@|9]
          -filename msg was exported to
   4729   [Error downloading message.|9]
   4730   [Successful download.|9]
          -msg successful msg exportation
   4731   [@cls@--- Delete a Message ---|9]
          -delete msg header
   4732   [Hang on a sec...]
          -msg wait while deleting msg
   4733   [Message # to delete {CR=@P=1@/? to List/Q to Quit}? |1]
          -p1= current message
   4734   [Invalid message number.]
          -msg invalid msg number to delete
   4735   [Error Deleting Message.]
   4736   [You do not have access to delete that message.]
          -msg no access to delete msg
   4737   [Delete this message {Y/N}? |1]
          -confirm msg delete
   4740   [Message Title {@p=1@}: |1]
          -p1= default title (same as msg being replied to)
          -msg title input prompt
   4741   [Send To {@p=1@}: |1]
          -p1= author of msg being replied to or "Everyone" if new msg
          -msg send to input prompt
   4742   [Address {@p=1@}: |1]
          -p1= default network address
          -msg address input prompt
   4743   [Anonymous {Y/N}? |1]
          -reply anonymous confirm
   4744   [Error accessing sub-board.|9]
   4745   [The message cannot be accessed. {Aborting}|9]
   4746   [Attach a file to this message {Y/N}? |1]
          -attach file to msg confirm
   4747   [Include @P=1@ in your scan configuration {Y/N}? |1]
          -p1= conf item include confirm
          -scan config
   4748   [Include Message Base @P=1@ in your scan configuration {Y/N}? |1]
          -p1= msg base include confirm
          -scan config
   4749   [Include XFer Area @P=1@ in your scan configuration {Y/N}? |1]
          -xfer area include confirm
          -scan config
   4750   [Display Message Status Again {Y/N}? |1]
          -redisplay msg stats confirm
   4752   [Reply via E-mail or Netmail {Y/N}? |1]
          -reply privately confirm
   4754   [P) Personal Messages
           T) Text
           Search Option: |1]
          -search option input prompt
          -msg bases
   4756   [Text to search for: |1]
          -text search input prompt
          -msg bases
   4757   [This message is too large to edit!]
          -msg not enough memory to edit post
   4758   [@cls@--- Edit a Message ---|9]
          -edit msg header
   4759   [?) to List
           Q) Quit
           CR) Edit message number @p=1@
           Option: |1]
          -p1= current msg number
          -edit msg instruction/option input prompt
   4760   [Invalid message number!]
          -msg invalid msg number to edit
   4761   [Error editing message!]
   4762   [You do not have access to delete that message!]
          -msg invalid access, not the users msg

*********************** Menu Item Entries **********************************

   5002  [Standard Menu File]
         -menu file description, displayed when menu is selected
   5003  [Notes]
         -any notes on this menu file you wish to include
   5004  [Menu file vXX.X    08/25/94]
         -whatever you want here, seen when user types /MENU from a BBS prompt
   5010  [scnmailm]
         -scan e-mail menu
         -emulation, expert
   5011  []
         -scan e-mail menu
         -emulation, intermediate
   5012  []
         -scan e-mail menu
         -emulation, novice
   5013  []
         -scan e-mail menu
         -emulation, beginner
   5014  [Scanmail]
         -scan e-mail prompt
         -emulation
   5015  []
         -scan e-mail menu
         -TTY, expert
   5016  []
         -scan e-mail menu
         -TTY, intermediate
   5017  []
         -scan e-mail menu
         -TTY, novice
   5018  []
         -scan e-mail menu
         -TTY, beginner
   5019  []
         -scan e-mail prompt
         -TTY
   5020  [emailm]
         -e-mail menu
         -emulation, expert
   5021  []
         -e-mail menu
         -emulation, intermediate
   5022  []
         -email menu
         -emulation, novice
   5023  []
         -email menu
         -emulation, beginner
   5024  [Email]
         -e-mail prompt
         -emulation
   5025  []
         -email menu
         -TTY, expert
   5026  []
         -email menu
         -TTY, intermediate
   5027  []
         -email menu
         -TTY, novice
   5028  []
         -email menu
         -TTY, beginner
   5029  [Email]
         -e-mail prompt
         -TTY
   5030  [ueditm]
         -user edit menu
         -emulation, expert
   5031  []
         -user edit menu
         -emulation, intermediate
   5032  []
         -user edit menu
         -emulation, novice
   5033  []
         -user edit menu
         -emulation, beginner
   5034  [User Editor]
         -user editor prompt
         -emulation
   5035  []
         -user edit menu
         -TTY, expert
   5036  []
         -user edit menu
         -TTY, intermediate
   5037  []
         -user edit menu
         -TTY, novice
   5038  []
         -user edit menu
         -TTY, beginner
   5039  [User Editor]
         -user edit prompt
         -TTY
   5040  [nuvm]
         -nuv menu
         -emulation, expert
   5041  []
         -nuv menu
         -emulation, intermediate
   5042  []
         -nuvmenu
         -emulation, novice
   5043  []
         -nuvm menu
         -emulation, beginner
   5044  [New User Voting]
         -nuv prompt
         -emulation
   5045  []
         -nuv menu
         -TTY, expert
   5046  []
         -nuv menu
         -TTY, intermediate
   5047  []
         - nuv menu
         -TTY, novice
   5048  []
         -nuv menu
         -TTY, beginner
   5049  [New User Voting]
         -nuv prompt
         -TTY
   5050  [usrcustm]
         -user cust menu
         -emulation, expert
   5051  []
         -user cust menu
         -emulation, intermediate
   5052  []
         -user cust menu
         -emulation, novice
   5053  []
         -user cust menu
         -emulation, beginner
   5054  [User Custodian]
         -user cust prompt
         -emulation
   5055  []
         -user cust menu
         -TTY, expert
   5056  []
         -user cust menu
         -TTY, intermediate
   5057  []
         -user cust menu
         -TTY, novice
   5058  []
         -user cust menu
         -TTY, beginner
   5059  [User Custodian]
         -user cust prompt
         -TTY
   5060  [onelinem]
         -oneliner menu
         -emulation, expert
   5061  []
         -oneliner menu
         -emulation, intermediate
   5062  []
         -oneliner menu
         -emulation, novice
   5063  []
         -oneliner menu
         -emulation, beginner
   5064  [Oneliners]
         -oneliner prompt
         -emulation
   5065  []
         -oneliner menu
         -TTY, expert
   5066  []
         -oneliner menu
         -TTY, intermediate
   5067  []
         -oneliner menu
         -TTY, novice
   5068  []
         -oneliner menu
         -TTY, beginner
   5069  [Oneliners]
         -oneliner prompt
         -TTY
   5070  [sysopm]
         -sysop menu
         -emulation, expert
   5071  []
         -sysop menu
         -emulation, intermediate
   5072  []
         -sysop menu
         -emulation, novice
   5073  []
         -sysop menu
         -emulation, beginner
   5074  [Sysop Functions]
         -sysop prompt
         -emulation
   5075  []
         -sysop menu
         -TTY, expert
   5076  []
         -sysop menu
         -TTY, intermediate
   5077  []
         -sysop menu
         -TTY, novice
   5078  []
         -sysop menu
         -TTY, beginner
   5079  [Sysop Functions]
         -sysop prompt
         -TTY
   5080  [bbslistm]
         -bbs list menu
         -emulation, expert
   5081  []
         -bbs list menu
         -emulation, intermediate
   5082  []
         -bbs list menu
         -emulation, novice
   5083  []
         -bbs list menu
         -emulation, beginner
   5084  [BBS Listing]
         -bbs list prompt
         -emulation
   5085  []
         -bbs list menu
         -TTY, expert
   5086  []
         -bbs list menu
         -TTY, intermediate
   5087  []
         -bbs list menu
         -TTY, novice
   5088  []
         -bbs list menu
         -TTY, beginner
   5089  [BBS Listing]
         -bbs list prompt
         -TTY
   5090  [automesm]
         -automessage menu
         -emulation, expert
   5091  []
         -automessage menu
         -emulation, intermediate
   5092  []
         -automessage menu
         -emulation, novice
   5093  []
         -automessage menu
         -emulation, beginner
   5094  [Automessage]
         -automessage prompt
         -emulation
   5095  []
         -automessage menu
         -TTY, expert
   5096  []
         -automessage menu
         -TTY, intermediate
   5097  []
         -automessage menu
         -TTY, novice
   5098  []
         -automessage menu
         -TTY, beginner
   5099  [Automessage]
         -automessage prompt
         -TTY
   5100  [artgalm]
         -art gallery menu
         -emulation, expert
   5101  []
         -art gallery menu
         -emulation, intermediate
   5102  []
         -art gallery menu
         -emulation, novice
   5103  []
         -art gallery menu
         -emulation, beginner
   5104  [Art Gallery]
         -art gallery prompt
         -emulation
   5105  []
         -art gallery menu
         -TTY, expert
   5106  []
         -art gallery menu
         -TTY, intermediate
   5107  []
         -art gallery menu
         -TTY, novice
   5108  []
         -art gallery menu
         -TTY, beginner
   5109  [Art Gallery]
         -art gallery prompt
         -TTY
   5110  [doorsm]
         -door menu
         -emulation, expert
   5111  []
         -door menu
         -emulation, intermediate
   5112  []
         -door menu
         -emulation, novice
   5113  []
         -door menu
         -emulation, beginner
   5114  [Doors]
         -door prompt
         -emulation
   5115  []
         -door menu
         -TTY, expert
   5116  []
         -door menu
         -TTY, intermediate
   5117  []
         -door menu
         -TTY, novice
   5118  []
         -door menu
         -TTY, beginner
   5119  [Doors]
         -door prompt
         -TTY
   5120  [wfcm]
         -wfc menu
         -emulation, expert
   5121  []
         -wfc menu
         -emulation, intermediate
   5122  []
         -wfc menu
         -emulation, novice
   5123  []
         -wfc menu
         -emulation, beginner
   5124  [WFC]
         -wfc prompt
         -emulation
   5125  []
         -wfc menu
         -TTY, expert
   5126  []
         -wfc menu
         -TTY, intermediate
   5127  []
         -wfc menu
         -TTY, novice
   5128  []
         -wfc menu
         -TTY, beginner
   5129  [WFC]
         -wfc prompt
         -TTY
   5130  [statsm]
         -statistics menu
         -emulation, expert
   5131  []
         -statistics menu
         -emulation, intermediate
   5132  []
         -statistics menu
         -emulation, novice
   5133  []
         -statistics menu
         -emulation, beginner
   5134  [System Statistics]
         -statistics prompt
         -emulation
   5135  []
         -statistics menu
         -TTY, expert
   5136  []
         -statistics menu
         -TTY, intermediate
   5137  []
         -statistics menu
         -TTY, novice
   5138  []
         -statistics menu
         -TTY, beginner
   5139  [System Statistics]
         -statistics prompt
         -TTY
   5140  [xeditm]
         -ext edit menu
         -emulation, expert
   5141  []
         -ext edit menu
         -emulation, intermediate
   5142  []
         -ext edit menu
         -emulation, novice
   5143  []
         -ext edit menu
         -emulation, beginner
   5144  [Extended Editor]
         -ext edit prompt
         -emulation
   5145  []
         -ext edit menu
         -TTY, expert
   5146  []
         -ext edit menu
         -TTY, intermediate
   5147  []
         -ext edit menu
         -TTY, novice
   5148  []
         -ext edit menu
         -TTY, beginner
   5149  [Extended Editor]
         -ext edit prompt
         -TTY
   5150  [usrudm]
         -user file edit menu
         -emulation, expert
   5151  []
         -user file edit menu
         -emulation, intermediate
   5152  []
         -user file edit menu
         -emulation, novice
   5153  []
         -user file edit menu
         -emulation, beginner
   5154  [File Editor]
         -user file edit prompt
         -emulation
   5155  []
         -user file edit menu
         -TTY, expert
   5156  []
         -user file edit menu
         -TTY, intermediate
   5157  []
         -user file edit menu
         -TTY, novice
   5158  []
         -user file edit menu
         -TTY, beginner
   5159  [File Editor]
         -user file edit prompt
         -TTY
   5160  [batchm]
         -batch menu
         -emulation, expert
   5161  []
         -batch menu
         -emulation, intermediate
   5162  []
         -batch menu
         -emulation, novice
   5163  []
         -batch menu
         -emulation, beginner
   5164  [Batch Transfers]
         -batch prompt
         -emulation
   5165  []
         -batch menu
         -TTY, expert
   5166  []
         -batch menu
         -TTY, intermediate
   5167  []
         -batch menu
         -TTY, novice
   5168  []
         -batch menu
         -TTY, beginner
   5169  [Batch Transfers]
         -batch prompt
         -TTY
   5170  [newscanm]
         -newscan menu
         -emulation, expert
   5171  []
         -newscan menu
         -emulation, intermediate
   5172  []
         -newscan menu
         -emulation, novice
   5173  []
         -newscan menu
         -emulation, beginner
   5174  [Newscan]
         -newscan prompt
         -emulation
   5175  []
         -newscan menu
         -TTY, expert
   5176  []
         -newscan menu
         -TTY, intermediate
   5177  []
         -newscan menu
         -TTY, novice
   5178  []
         -newscan menu
         -TTY, beginner
   5179  [Newscan]
         -newscan prompt
         -TTY
   5180  [filescnm]
         -filescan menu
         -emulation, expert
   5181  []
         -filescan menu
         -emulation, intermediate
   5182  []
         -filescan menu
         -emulation, novice
   5183  []
         -filescan menu
         -emulation, beginner
   5184  [New File Scan]
         -filescan prompt
         -emulation
   5185  []
         -filescan menu
         -TTY, expert
   5186  []
         -filescan menu
         -TTY, intermediate
   5187  []
         -filescan menu
         -TTY, novice
   5188  []
         -filescan menu
         -TTY, beginner
   5189  [New File Scan]
         -filescan prompt
         -TTY
   5190  [filelstm]
         -filelist menu
         -emulation, expert
   5191  []
         -filelist menu
         -emulation, intermediate
   5192  []
         -filelist menu
         -emulation, novice
   5193  []
         -filelist menu
         -emulation, beginner
   5194  [File Listing]
         -filelist prompt
         -emulation
   5195  []
         -filelist menu
         -TTY, expert
   5196  []
         -filelist menu
         -TTY, intermediate
   5197  []
         -filelist menu
         -TTY, novice
   5198  []
         -filelist menu
         -TTY, beginner
   5199  [File Listing]
         -filelist prompt
         -TTY
   5200  [globmanm]
         -global mgmt menu
         -emulation, expert
   5201  []
         -global mgmt menu
         -emulation, intermediate
   5202  []
         -global mgmt menu
         -emulation, novice
   5203  []
         -global mgmt menu
         -emulation, beginner
   5204  [Global Mgmt]
         -global mgmt prompt
         -emulation
   5205  []
         -global mgmt menu
         -TTY, expert
   5206  []
         -global mgmt menu
         -TTY, intermediate
   5207  []
         -global mgmt menu
         -TTY, novice
   5208  []
         -global mgmt menu
         -TTY, beginner
   5209  [Global Mgmt]
         -global mgmt prompt
         -TTY
   5210  [fsysopm]
         -file sysop menu
         -emulation, expert
   5211  []
         -file sysop menu
         -emulation, intermediate
   5212  []
         -file sysop menu
         -emulation, novice
   5213  []
         -file sysop menu
         -emulation, beginner
   5214  [File Sysop]
         -file sysop prompt
         -emulation
   5215  []
         -file sysop menu
         -TTY, expert
   5216  []
         -file sysop menu
         -TTY, intermediate
   5217  []
         -file sysop menu
         -TTY, novice
   5218  []
         -file sysop menu
         -TTY, beginner
   5219  [File Sysop]
         -file sysop prompt
         -TTY
   5220  [filem]
         -file menu
         -emulation, expert
   5221  []
         -file menu
         -emulation, intermediate
   5222  []
         -file menu
         -emulation, novice
   5223  []
         -file menu
         -emulation, beginner
   5224  [File Area]
         -file prompt
         -emulation
   5225  []
         -file menu
         -TTY, expert
   5226  []
         -file menu
         -TTY, intermediate
   5227  []
         -file menu
         -TTY, novice
   5228  []
         -file menu
         -TTY, beginner
   5229  [File Area]
         -file prompt
         -TTY
   5230  [votem]
         -topic vote menu
         -emulation, expert
   5231  []
         -topic vote menu
         -emulation, intermediate
   5232  []
         -topic vote menu
         -emulation, novice
   5233  []
         -topic vote menu
         -emulation, beginner
   5234  [Voting Booth]
         -topic vote prompt
         -emulation
   5235  []
         -topic vote menu
         -TTY, expert
   5236  []
         -topic vote menu
         -TTY, intermediate
   5237  []
         -topic vote menu
         -TTY, novice
   5238  []
         -topic vote menu
         -TTY, beginner
   5239  [Voting Booth]
         -topic vote prompt
         -TTY
   5240  [subscnm]
         -subscan menu
         -emulation, expert
   5241  []
         -subscan menu
         -emulation, intermediate
   5242  []
         -subscan menu
         -emulation, novice
   5243  []
         -subscan menu
         -emulation, beginner
   5244  [Sub Area Scan]
         -subscan prompt
         -emulation
   5245  []
         -subscan menu
         -TTY, expert
   5246  []
         -subscan menu
         -TTY, intermediate
   5247  []
         -subscan menu
         -TTY, novice
   5248  []
         -subscan menu
         -TTY, beginner
   5249  [Sub Area Scan]
         -subscan prompt
         -TTY
   5250  [msgm]
         -msg menu
         -emulation, expert
   5251  []
         -msg menu
         -emulation, intermediate
   5252  []
         -msg menu
         -emulation, novice
   5253  []
         -msg menu
         -emulation, beginner
   5254  [Message Menu]
         -msg prompt
         -emulation
   5255  []
         -msg menu
         -TTY, expert
   5256  []
         -msg menu
         -TTY, intermediate
   5257  []
         -msg menu
         -TTY, novice
   5258  []
         -msg menu
         -TTY, beginner
   5259  [Message Menu]
         -msg prompt
         -TTY
   5260  [confm]
         -conf menu
         -emulation, expert
   5261  []
         -conf menu
         -emulation, intermediate
   5262  []
         -conf menu
         -emulation, novice
   5263  []
         -conf menu
         -emulation, beginner
   5264  [Conference Area]
         -conf prompt
         -emulation
   5265  []
         -conf menu
         -TTY, expert
   5266  []
         -conf menu
         -TTY, intermediate
   5267  []
         -conf menu
         -TTY, novice
   5268  []
         -conf menu
         -TTY, beginner
   5269  [Conference Area]
         -conf prompt
         -TTY
   5270  [miscm]
         -misc menu
         -emulation, expert
   5271  []
         -misc menu
         -emulation, intermediate
   5272  []
         -misc menu
         -emulation, novice
   5273  []
         -misc menu
         -emulation, beginner
   5274  [Misc Menu]
         -misc prompt
         -emulation
   5275  []
         -misc menu
         -TTY, expert
   5276  []
         -misc menu
         -TTY, intermediate
   5277  []
         -misc menu
         -TTY, novice
   5278  []
         -misc menu
         -TTY, beginner
   5279  [Misc Menu]
         -misc prompt
         -TTY
   5280  [mainlevm]
         -main level menu
         -emulation, expert
   5281  []
         -main level menu
         -emulation, intermediate
   5282  []
         -main level menu
         -emulation, novice
   5283  []
         -main level menu
         -emulation, beginner
   5284  [Main Level]
         -main level prompt
         -emulation
   5285  []
         -main level menu
         -TTY, expert
   5286  []
         -main level menu
         -TTY, intermediate
   5287  []
         -main level menu
         -TTY, novice
   5288  []
         -main level menu
         -TTY, beginner
   5289  [Main Level]
         -main level prompt
         -TTY
   5290  [mainm]
         -main menu
         -emulation, expert
   5291  []
         -main menu
         -emulation, intermediate
   5292  []
         -main menu
         -emulation, novice
   5293  []
         -main menu
         -emulation, beginner
   5294  [Main Menu]
         -main prompt
         -emulation
   5295  []
         -main menu
         -TTY, expert
   5296  []
         -main menu
         -TTY, intermediate
   5297  []
         -main menu
         -TTY, novice
   5298  []
         -main menu
         -TTY, beginner
   5299  [Main Menu]
         -main prompt
         -TTY
   5300  [V)iew news  L)ist news  U)pload news  D)elete news  W)rite news
          Q)uit]
         -news area menu
   5310  [C)hange dir  D)OS drop  E)dit file F)ile list|9]
         -file mgr menu option prompt
   5320  [D)elete user  E)dit user  S)kip user V)alidate user  Q)uit ]
         -user scan menu option prompt
   5330  [Q)uit      A)gain  P)ost  L)ist  R)eply  CR) next  K)ill
          D)ownload  /)Multiline    F)ast list ]
         -sub search help
   5500  -extra menus: Menu number*10+500, for use with celmenu.ini extra
          menus.)

