POWERFLASH: POWERPC 620 ANNOUNCED + 604 PRICING + 601/603 PRICE CUTS

(October 17th 1994) Motorola and IBM announced today that the first 64-bit
PowerPC processor - the 620 has hit first silicon. It is expected to begin
general sampling in the second quarter of 1995 with general availability
set for the second half of 1995.

The chip will initially ship running at 133MHz and the companies have 
taken the unusual step of specifying a maximum clock-speed design point:
150MHz. At 130MHz the estimated SPECint92 for the processor is 225 and the
SPECfp 300. These results are for 32-bit code and the companies say that
they would not expect to see a significant speed  increase under the
64-bit mode. The single-chip processor contains 7 million processors,
though a good proportion of these are used in the 64kB cache; split evenly
between data and instructions. 

Die size is 17.1mm x 18.2mm and programmers will be able to keep their toes
warm in the long, dark winter evenings since the thing dissipates a toasty
30W at 133MHz. 

Perhaps the most surprising thing about the processor is the lack of a
radical design change. It looks very much like an evolution of the 604.
For example the 620 has exactly the same number of functional units as the
604 - three integer units (one for complex maths) one floating point unit,
a branch unit and a load/store unit. The chip can fetch and dispatch up to
4 instructions per cycle. A little of the 620's extra speed comes from a
slightly faster transistor design, but most comes from the extra cache and
a general clean-up of the functional units. The L2 cache controller has
also come on-board the processor and the designers have allowed for a
massive cache capacity configurable from 1MB to 128MB. There has also been
a substantial design push to enhance multiprocessor support, with a new
method of decoupling processing from the need to check cache-coherency on
other processors. All in all,  the designers say that this is a chip
designed for fast transaction processing in mind.

Meanwhile IBM has announced availability and pricing for its 100MHz PowerPC
601, 100MHz PowerPC 604 and 66 and 80MHz PowerPC 603 microprocessors.  

The 604 is sampling now and the company says it expects to begin full
production in December. They cost $549 in quantities of 1,000. The 100MHz
PowerPC 601 is set to begin production in November and will cost $399 in
lots of 1,000. Prices on the other PowerPC 601s have been trimmed down to
$165 for the 50MHz and 66MHz versions and $249 for the  80MHz version. IBM
 also announced significant price reductions on the PowerPC 603, which now
cost $165 for the 66MHz version and $195 for the 80MHz version. 

 ============================================================
 From the  'New Product Information'  Electronic News Service
 on AOL (Keyword = New Products) & Delphi (GO BUSINESS PROD)
 ============================================================
 This information was processed from data provided by the 
 company or author mentioned. For additional details, please 
 contact them directly at the address/phone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
