   Workstation for DOS IPX Client
                                                                    v2.00
      
      
      NetWare* DOS IPX Client Driver Installation Notes for Artisoft's
      NodeRunner Pro(TM) LAN Adapter
      ================================================================
         
         Location of Driver:     \NWCLIENT\IPX.COM
      
      
      Quick Installation
      ------------------
      
      Use the Auto Installation option in the NProSet program.
      
      
      Sample Configuration Files
      --------------------------
      
      AUTOEXEC.BAT:
         
         IPX
         NETX
      
      
      General Installation
      --------------------
      
      Note:    If you are also running Windows* for Workgroups, please
               see the Hints and Tips section below for important
               information.
      
      1  A pre-generated IPX.COM comes on the disk and will work with any
         configuration that the lan adapter is set at.
      
      2  Copy IPX.COM and NETX.EXE from the NWCLIENT directory to your
         boot disk, and add them to the AUTOEXEC.BAT or login batch file.
      
      
      Hints and Tips
      --------------
      
      1  If the workstation cannot find the file server:
      
         The pregenerated IPX.COM on the diskette is configured for
         802.3 frame type.  Be sure that 802.3 frame type is loaded and
         bound at the file server.  This is especially true with a
         NetWare 3.12 or 4.01 file server since 802.2 loads by default,
         not 802.3.
      
      2  If workstation requires 802.2 frame type:
      
         IPX.COM only supports 802.3 and Ethernet_II.  You must use the
         ODI driver for 802.2 frametype.
      
      3  If workstation requires Ethernet II frame type:
      
         Use Novell's ECONFIG program to change the IPX.COM to
         Ethernet_II frame type.
      
      4  If installing Windows for Workgroups and Novell NetWare:
      
         You must install the DOS ODI client driver, the IPX.COM driver
         will not allow support for Windows for Workgroups.
      
         To install proper driver support for Windows for Workgroups and
         Novell NetWare on the same workstation, follow these steps:
         
         1  Set up the workstation with the DOS ODI client driver.
         
         2  Load the ODI driver and login to your NetWare server.
         
         3  Start Windows for Workgroups and set up the driver for the
            NodeRunner Pro adapter by following the instructions
            shown in the Windows for Workgroups 3.11 installation
            document.  When the driver is chosen, Windows for Workgroups
            will detect that the ODI driver is already loaded and
            automatically install the appropriate support.
      
      
      
      *  Third-party trademarks are the property of their respective
         owners
      
      
