   Windows for Workgroups v3.10
                                                                    v2.00
      
      
      Microsoft Windows* for Workgroups 3.10 Installation Notes for
      Artisoft's NodeRunner Pro(TM) LAN Adapter
      =============================================================
      
      Location of Driver:     \WFW\310\EPRO.DOS
      
      
      Sample Configuration Files
      --------------------------
      
      CONFIG.SYS (install will add these lines)
      ***added if running NetWare*
         
         DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
         DEVICE=C:\WINDOWS\EPRO.DOS
         ***DEVICE=C:\WINDOWS\MSIPX.SYS
         DEVICE=C:\WINDOWS\WORKGRP.SYS
         LASTDRIVE=P
      
      PROTOCOL.INI (install creates this file)
      ***added if running NetWare
         
         [network.setup]
         version=0x3100
         netcard=ms$EPRO,1,MS$EPRO
         transport=ms$netbeui,MS$NETBEUI
         ***transport=ms$ipx,MS$IPX
         lana0=ms$EPRO,1,ms$netbeui
         ***lana1=ms$EPRO,1,ms$ipx
         
         [protman]
         DriverName=PROTMAN$
         PRIORITY=MS$NETBEUI
         
         [MS$EPRO]
         DriverName=EPRO$
         IOADDRESS=0x300
         INTERRUPT=5
         
         [MS$NETBEUI]
         DriverName=netbeui$
         SESSIONS=10
         NCBS=32
         BINDINGS=MS$EPRO
         LANABASE=0
         
         ***[MS$IPX]
         ***Drivername=IPX$
         ***MediaType=Novell/Ethernet
         ***Bindings=MS$EPRO
      
      AUTOEXEC.BAT
         
         C:\WINDOWS\NET START
         ***C:\WINDOWS\MSIPX
         ***C:\WINDOWS\NETX
      
      
      General Installation
      --------------------
      
      New Windows for Workgroups Installation:
      
      1  When installing Windows for Workgroups, you are prompted for a
         network driver.  Select the "Unlisted or Updated Network
         Driver".
      
      2  Insert the adapter driver disk containing OEMSETUP.INF and
         EPRO.DOS.
      
      3  Specify the directory for the driver (A:\WFW\310) and select the
         Artisoft NodeRunner Pro adapter driver.
      
      4  Select Advanced options, and make sure the parameters match the
         card settings.  The installation program copies the necessary
         files and creates PROTOCOL.INI for use with the adapter.
      
      5  Continue the installation per Windows for Workgroups
         instructions.
      
      Existing Windows for Workgroups Installation:
      
      1  Select the "Control Panel" icon in the Main Group.
      
      2  Select the "Network" icon.
      
      3  Select the "Adapters" button.
      
      4  Select the Add option.
      
      5  Select "Unlisted or Updated Network Adapter"
      
      6  Insert the adapter driver disk with OEMSETUP.INF and EPRO.DOS
         and specify the path A:\WFW\310.
      
      7  Select the Artisoft NodeRunner Pro driver.
      
      8  Specify the correct interrupt and Base I/O Port in the adapter
         setup.  The installation program copies the necessary files and
         creates PROTOCOL.INI for use with the adapter.
      
      9  Select "Close" and when prompted, restart computer for changes
         to take affect and complete the installation.
      
         NOTE: You must have a terminated cable attached to the adapter
               when you start Windows for Workgroups.  If you don't,
               Windows for Workgroups may hang.
      
      
      To Add NetWare
      --------------
      
      1  Select the "Control Panel" icon in the Main Group.
      
      2  Select the "Network" icon.
      
      3  Select the "Networks" button.
      
      4  Select "Novell NetWare" and select the add button.
      
      5  Select "OK" and close the Network icon.
      
      6  Select reboot computer and restart Windows.
      
      
      
      *  Third-party trademarks are the property of their respective
         owners.
