   LAN Server
                                                                    V2.01
      
      
      LAN Server Installation Notes for Artisoft's NodeRunner Pro(TM)
      LAN Adapter
      ===============================================================
         
         Location of Driver:   \IBMOS2\EPRO.OS2   (OS/2 driver)
                               \IBMOS2\EPROEOS2.NIF
                                  or
                               \DOS\EPRO.DOS   (DOS driver)
                               \DOS\EPROEDOS.NIF
                                  or
                               \WFW\310\EPRO.DOS (for LAN Server 4.0
                                                  DOS client)
                               \WFW\310\OEMSETUP.INF
         
      Sample Configuration Files
      --------------------------
         
         PROTOCOL.INI (will include):
         
         [EPRO_NIF]
              DriverName = EPRO$
              IOADDRESS = 0x300
      
      General Installation under OS/2
      -------------------------------
      
      1  Verify the I/O Address of the NodeRunner Pro adapter by
         running NProSet.
      
      2  This installation does not use OS/2 Extended Services.  These
         steps apply to both the file server and the workstation.  After
         installing OS/2, follow the below steps prior to installing LAN
         Server 3.0 or the workstation requester.
      
      3  Copy EPRO.OS2 and EPROEOS2.NIF from the NodeRunner Pro LAN
         adapter configuration and driver diskette to the C:\IBMCOM\MACS
         directory.
      
      4  Install LAN Adapter and Protocol Support (LAPS) from an OS/2
         window.
      
      5  After installing the software, select configure LAN transports.
      
         The NodeRunner Pro will appear in the LAN Adapters window.
         Select the necessary protocols and save the configuration.
      
      6  Exit LAPS, shutdown the system and reboot the computer.  The
         complete PROTOCOL.INI file will be created and put in the
         C:\IBMCOM directory.  The CONFIG.SYS and AUTOEXEC.BAT files will
         be updated.
      
      General Installation under DOS
      ------------------------------
      
      1  Run DXMAID from the IBM OS/2 LAN Server v3.0 LAN Requester; LAN
         Support Program (LSP).
      
      2  Complete environment information according to your needs.
      
      3  Specify directory where EPRO.DOS and EPROEDOS.NIF are located.
         See driver location listing above for location on adapter disk.
         Be sure the EPRO.DOS driver is v2.32 dated 1-25-95 or later.
      
      4  When DXMAID is completed, run INSTALL from DOS LAN Requester
         diskette.
      
      Note1:   Installing under LAN Server 4.0, the program will prompt
               you to select the adapter driver, then it will proceed to
               ask you to insert the DOS LAN Requester 1 disk.  Leave the
               driver disk in and hit <enter>. The program will then copy
               the EPRO.DOS driver.  Continue the installation as
               directed.
      
      Note2:   LAN Requester needs DOS 3.3 thru 5, but if you are on DOS
               6.0 or above, SETVER can be used on the EXE files on the
               DOS LAN Requester disks.
