                        V Series Modem Setup

     The  proper setup for all Zoom V series modems...  Pick  the
Hayes  2400  from software selection. Or use AT&F&C1&D2  for  the
init  string. Set RTS/CTS =ON, Lock DTE to 19,200 (9600+  models)
or 9600 (2400 v42bis models), do not follow modem connect or  set
Autobaud  detect=OFF/NO.  (for the White V42bis [2400]  or  Turbo
modems add S36=7 to the string).

     Any program that uses ATZ in the intitialization or  command
string,  is expecting that it is the only software that you  will
be  using on the computer with that modem. As that  is  extremely
unlikely, we disapprove of that practice vehemently. Replace  the
ATZ  with (99% of the time) AT&F&C1&D2. Put in whatever they  use
for a carraige return (if they show one). If there are additional
paramters  put  them between the above string  and  the  carraige
return  character(s).  (Most often the ^M is  used  for  carraige
return.)

