
                 Alternative Initialization Strings

    Most software used with Zoom/modems should be set with the setup
STRING for a Hayes Smartmodem 2400.  Typically this is AT&F&C1&D2.  If
any software has saved a string and uses ATZ for an init, type AT&F&W
in terminal mode to restore to factory defaults.  Then type in a
correct string for that software.  Use XON/XOFF flow, or NONE.

    If you have a Hi-speed Zoom modem, use the same string.  Then lock
DTE BPS 19,200, set CTS/RTS flow.  In some cases you also want S95=1
(to pass true connect speed, default is 0 which passes DTE connect
speed).

