Pardon the brevity, but I'm not much of a tech manual author.

Steps to connect to CRIS via Warp IAK software:

1.  Get an access number

2.  Call CRIS customer support and ask what the TCP/IP addresses are for
    this number.  They are all different.
    
3.  Make a copy of CRIS.CMD and put it in a safe place.

4.  Edit CRIS.CMD to change 'annex_address' and 'os2_address' to the
    TCP/IP addresses you obtained from CRIS customer support.
    
5.  Save CRIS.CMD to your /tcpip/bin directory.

6.  Copy ALTPRO.CMD to your /tcpip/bin directory.

7.	Open your Dial Alternate Provider Icon Settings.

8.  Change Path and file name to ALTPRO.CMD

9.  Change the Working Directory to \tcpip\bin

10. Save the changes.

11. Start that session by double clicking on the icon.

12. Select Add Provider

13. Provider Name= CRIS
    Login ID= Your account login name
    Password= the password you use for CRIS
    Nickname= CRIS
    Phone Number= Your local access number
    Login Script= altpro.cmd atdt555-1212 loginname@slip password
                             (USE YOUR INFO IN THESE PLACES)
    Connection Type= SLIP
   
14. Click on Next

15. MTU Size= 1500
    Domain Nameserver= 199.3.12.3 for Tulsa Oklahoma
    Your Host Name= voyager
    Your Domain Name= cris.com
    
16. Click on Next

17. All Servers (News, Gopher, WWW, & POP)= deathstar.cris.com                             
    Reply Domain= com
    Reply (Mail) ID= loginname@cris.com
    POP Login ID= loginname
    POP Password= password
    
18. Click on Next

19. Select your Com Port and Speed of your port.  The port speed will
    probably be 57600 or 38400.  If you know differently, do it.
     
20. Click on OK

21. Click on Dial.

22. If you see no connection in 90 seconds, hangup and try again.


Hope this is useful to you.  I know I am using the Internet more and more now
that OS/2 included Internet tools that are some of the best around.  Ultimail
Lite has many bugs in it however, so I'm currently using Eudora for my
E-Mail.

Stay Warped!
